Gigabyte EP35-DS3 sys_fan2

kill · 27.03.2009., 12:33

4pinski, znači da ima regulaciju, ali preko čega? afaik matična ne podržava speedfan.

vent na njemu je na 400rpm, umjesto 1200+, daleko niži napon.

thopok · 27.03.2009., 16:30

?

kill · 28.03.2009., 23:50

smart fan funkciju imam jedino za CPU vent.

domy_os · 29.03.2009., 17:26

Imaš i za sistemske ventilatore...

kill · 29.03.2009., 17:41

nemam :P

jel mora bit spojen 4pinski vent ili?

domy_os · 29.03.2009., 17:54

Ne mora. Gle, isključi SmartFAN i svi ventovi će raditi na 12 V...

kill · 29.03.2009., 17:55

kao što rekoh, BIOS smartfan funkcija postoji jedino za CPU fan.

izguglo:

From Janus Yeh, GB support:
"CPU_FAN connector needs a CPU cooler with four wires were the PWM modulator is included in the cooler. The mobo senses the CPU temperature and managing the pin 4 signal, the cooler's fan will automatically be increased or decreased, following the CPU temp. Fan's rotation feedback returns via pin 3 for BIOS alarm feature.

SYS_FAN2 connector needs any fan, with three or four wires (don't care) since the speed is controlled via on-board PWM controller that supply pulse-width-modulated 12v for the fan via pin 2.
So, if using a four wire fan, its internal PWM is locked to full speed (this explain that fixed 5v on pin 4).
This time, the mobo senses the North Bridge (in my case the P35) temperature and will increase or decrease the speed of the fan connected in this socket. Feedback is sent to pin 3 for BIOS alarm purposes.

SYS_FAN1 and PWR_FAN are three pin socket with fixed full speed fan. No controlled rotation at all from the mobo. Rotation feedback also monitored via pin 3 only for BIOS alarm purpose."

znači ako želim da mi se sys_fan2 normalno vrti treba ugrijat NB

27.03.2009., 12:33	#1
kill Premium Moj komp Datum registracije: Jun 2003 Lokacija: Rijeka Postovi: 533	Gigabyte EP35-DS3 sys_fan2 4pinski, znači da ima regulaciju, ali preko čega? afaik matična ne podržava speedfan. vent na njemu je na 400rpm, umjesto 1200+, daleko niži napon.

29.03.2009., 17:26	#4
domy_os EMP moderator Datum registracije: Apr 2005 Lokacija: Osijek Postovi: 18,812	Imaš i za sistemske ventilatore... __________________ "Kako su krojači novog svjetskog poretka uspjeli u tako kratko vrijeme slomiti intelektualne sposobnosti društva, uništiti kritičku svijest i ljudima nametnuti izvrnutu logiku?"

29.03.2009., 17:54	#6
domy_os EMP moderator Datum registracije: Apr 2005 Lokacija: Osijek Postovi: 18,812	Ne mora. Gle, isključi SmartFAN i svi ventovi će raditi na 12 V... __________________ "Kako su krojači novog svjetskog poretka uspjeli u tako kratko vrijeme slomiti intelektualne sposobnosti društva, uništiti kritičku svijest i ljudima nametnuti izvrnutu logiku?"

27.03.2009., 16:30	#2
thopok Guest Datum registracije: Jun 2008 Lokacija: Splity Postovi: 3,003	?

28.03.2009., 23:50	#3
kill Premium Moj komp Datum registracije: Jun 2003 Lokacija: Rijeka Postovi: 533	smart fan funkciju imam jedino za CPU vent.

29.03.2009., 17:41	#5
kill Premium Moj komp Datum registracije: Jun 2003 Lokacija: Rijeka Postovi: 533	nemam :P jel mora bit spojen 4pinski vent ili?

29.03.2009., 17:55	#7
kill Premium Moj komp Datum registracije: Jun 2003 Lokacija: Rijeka Postovi: 533	kao što rekoh, BIOS smartfan funkcija postoji jedino za CPU fan. izguglo: From Janus Yeh, GB support: "CPU_FAN connector needs a CPU cooler with four wires were the PWM modulator is included in the cooler. The mobo senses the CPU temperature and managing the pin 4 signal, the cooler's fan will automatically be increased or decreased, following the CPU temp. Fan's rotation feedback returns via pin 3 for BIOS alarm feature. SYS_FAN2 connector needs any fan, with three or four wires (don't care) since the speed is controlled via on-board PWM controller that supply pulse-width-modulated 12v for the fan via pin 2. So, if using a four wire fan, its internal PWM is locked to full speed (this explain that fixed 5v on pin 4). This time, the mobo senses the North Bridge (in my case the P35) temperature and will increase or decrease the speed of the fan connected in this socket. Feedback is sent to pin 3 for BIOS alarm purposes. SYS_FAN1 and PWR_FAN are three pin socket with fixed full speed fan. No controlled rotation at all from the mobo. Rotation feedback also monitored via pin 3 only for BIOS alarm purpose." znači ako želim da mi se sys_fan2 normalno vrti treba ugrijat NB

Oglasni prostor
PC Ekspert Forum Oglas

Oglasni prostor
PC Ekspert Forum Oglas