(rijeseno) Linux (Xubuntu) & LG L194WT problem

[zare]

Imam jedno pitanje...

Kako natjerati dotični monitor [LG L194WT] da radi u svojoj nativnoj rezoluciji (1440×900) priključen na DVI izlazu ATi Radeon X1600pro

Ubih se od konfiguracije xorg.conf ali uvjek isto...
ili... ne radi (neće ući u X-e)
ili... radi kako je i radilo / neka niža rezolucija razvučena na 1440×900
---

Ugl. trebam pomoć oko ovog jer je to jedina stvar koju nisam uspio riješit...

Sada sam na poslu, čeprkam po netu i nađem ovo... pa samo da pitam dali bi radilo... i koje podatke trebam upisati za ATI X1600Pro grafulju...

Section "Monitor"

Identifier "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 30-83

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 56-75
Modeline "1440x900@60" 108.84 1440 1472 1880 1912 900 918 927 946

EndSection



---------------------------------------------



Next step was add the resolution under the screen sections.

Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "My Monitor"
DefaultDepth 24

Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1440x900" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection


-----------------------------------------------------------

and finally the last step that took me FOREVER to find was adding this simple line in the device section --

Section "Device"
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "ModeValidation" "NoEdidDFPMaxSizeCheck"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection

(the Modevalidation options is what did it)



and that was it, problem solved.

Unaprijed hvala...

[yedwy]

Uff ovako sad me nemoj držati za riječ ali mislim da vše widescreen reze budeš teško natjerao da rade na ATI driveru, ja sam sa SuSeom popizdio od konfanja na x550 i nisam nikad uspio bio bilo što izvan standardnih 4:3 izvući da izgleda kako treba...

Mislim da je problem u ATIjevim driverima koji seru...

Inače ovo nvidia zamjeniš sa imenom ati drivera i mislim (mislim samo nisam 100% siguran) da ti umjesto 24bit treba 32bit na ATi grafama...

ALi ja ti nisam neki linux guru tako da uzmi s rezervom...

[zare]

WTF?! Linuksaši!?... šta je ovo? Niko ništa ne odgovara...

[yedwy]

Trebo si postati da častiš sa 2x veliki čevapi i 2x 1L Velebitskog onog ko rješi...

[zare]

.: bump!!! :.

[zare]

Riješeno...

[pipe]

Kako si riješio?

[zare]

Skineš ATi-jeve drivere (*.run) sa njihovog sitea.

Omogućili universe repozitorij u /etc/apt/sources.list
Pa:

sudo aptitude install module-assistant build-essential debhelper debconf dh-make fakeroot libstdc++5 linux-headers-$(uname -r)

Uredi /etc/X11/xorg.conf fajl i dodajte sljedeće na kraj fajla:

Section "Extensions"
Option "Composite" "0"
EndSection

Uredite spisak modula koji se neće učitavati prilikom bootanja:

sudo gedit /etc/default/linux-restricted-modules-common

dodajte fglrx tako da fajl sadrži sljedeće:

DISABLED_MODULES="fglrx"

I onda:

sudo ln -sf bash /bin/sh
sudo ln -sf dash /bin/sh
bash ati-driver-installer-8.*.run --buildpkg Ubuntu/edgy
sudo dpkg -i *.deb
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrxsudo module-assistant install fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
sudo shutdown -r now

Sama instalacija drivera je riješila moj problem...