2x1gb RAM-a ili 4x512gb RAM-a

[zeus-horny]

Kaj je bolje imat :confused: :confused:

[domy_os]

2 x 1 GB

CR 1T ne šljaka kod 4 x 512 MB

[Codiac]

2 x 1gb

[BrunoZG]

jel ove nove ploče oće radit u dual chanellu ak imas 1 pločicu od 1GB i dvije od 512?

Nforce 2 je samo tak i radio

[atha]

kako su dechki i rekli, 2x1gb svakako, bolje ce raditi,
a i da ne govorimo da cesh za godinu dana mochi ubosti josh dva takva pa sve skupa 4gb....


@bruno zg
probao sam jedan stick od 1gb i 2x256, ne rade u DC-u, tutto completo na single channel.

[BrunoZG]

MIlsim da bi moralo bit 1 GB i 2x512.....

ili 1x512 i 2x256...Ista kolicina rama po kanalu

[SetH]

Originally posted by zeus-horny
Kaj je bolje imat :confused: :confused:

imaš pm,inbox ti je pun

[ivan OS]

Originally posted by domy_os


CR 1T ne šljaka kod 4 x 512 MB

Šljaka kod DFI Lanparty UT RDX200 CF-DR

ATI Radeon Xpress 200 CrossFire chipset

[Wolverine]

Originally posted by ivan OS
Šljaka kod DFI Lanparty UT RDX200 CF-DR

ATI Radeon Xpress 200 CrossFire chipset

Ma da si ziher?

Pa mem kontroler je u procu a ne na ploči!
jedino neki ali ponavljam neki FX57 mogu držat 4 dvostrana keksa na 1T

2x1GB je bolje od 4x512MB

[buljo]

Originally posted by BrunoZG
MIlsim da bi moralo bit 1 GB i 2x512.....

ili 1x512 i 2x256...Ista kolicina rama po kanalu

Tako radi, svaki kanal mora imat istu kolčinu memorije.

[ivan OS]

Originally posted by BlackMack
Ma da si ziher?

Pa mem kontroler je u procu a ne na ploči!
jedino neki ali ponavljam neki FX57 mogu držat 4 dvostrana keksa na 1T

2x1GB je bolje od 4x512MB

Nismo uopće pričali o jednostranim i dvostranim memorijama,a ne moraš me učiti gdje je tu mem. kontroler
Ja sam se samo osvrnuo na 1T post,ne na izbor 2 x 1GB ili 4 x 512 MB

Naravno da je stvar i do proca ali:

"To DFI's credit, many of the features of their new RDX200 board seem to be geared toward an understanding of what it will take to succeed with their new ATI chipset motherboard. Crossfire dual-video is on the board, but the emphasis is on performance and features. DFI lavished all the adjustments and tweak options of their nForce4 board on the RDX200 and then went even further. Oscar Wu found out how to make 4DS DIMMs run at 1T Command Rate and launched that solution with this board. He also claims that he has a working CAS 1.5 on the ATI motherboard, and the options for CAS 1.0 and 1.5 are available in the BIOS. Memory voltage extends to 4.0V, so any memory is supported, but this is done without special jumpers or a heat-producing work-around."


http://anandtech.com/mb/showdoc.aspx?i=2572

[Lihto]

bolje je 2x1gb

[Wolverine]

Originally posted by ivan OS
[B]Nismo uopće pričali o jednostranim i dvostranim memorijama,a ne moraš me učiti gdje je tu mem. kontroler
Ja sam se samo osvrnuo na 1T post,ne na izbor 2 x 1GB ili 4 x 512 MB

ja tebe niti ne pokušavam nekaj učit


EDIT
nisam ''sredio post'' zbog informacije koja (da odmah kažem nema veze s ovim) nego ovo nije niti mjesto niti vrijema a ponajmanje mi se da sad s tobom tu navlačit

[ivan OS]

Vidim da si pročitao informaciju pa sredio post

[ivan OS]

@BlackMack
Pročitao sam i originalni post...

[Jelc]

Originally posted by ivan OS
"To DFI's credit, many of the features of their new RDX200 board seem to be geared toward an understanding of what it will take to succeed with their new ATI chipset motherboard. Crossfire dual-video is on the board, but the emphasis is on performance and features. DFI lavished all the adjustments and tweak options of their nForce4 board on the RDX200 and then went even further. Oscar Wu found out how to make 4DS DIMMs run at 1T Command Rate and launched that solution with this board. He also claims that he has a working CAS 1.5 on the ATI motherboard, and the options for CAS 1.0 and 1.5 are available in the BIOS. Memory voltage extends to 4.0V, so any memory is supported, but this is done without special jumpers or a heat-producing work-around."

To ti je otprilike ona narodna "pisalo na plotu p***a pa se netko našpranjio"

U praksi to baš i ne radi kako su si oni zamislili.