Recorder: <TSSTcorp CDDVDW SH-S203B>Version: SB03 - HA 1 TA 3 - 8.3.2.1
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <SM3132A GMQ515L >Version: 1.01 - HA 1 TA 1 - 8.3.2.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : RAID0-410AS iaStorV Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L250S0 iaStorV Port 0 ID 1 DMA: Off
CdRomPeripheral : SM3132A GMQ515L 1.01 aapyocg2 Port 4 ID 0 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2045MB (2094800kB)
Free physical memory: 725MB (742972kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.5.2008
Burn DVD Image
14:00:18 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
14:00:18 #2 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media
14:00:18 #3 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1919275 (426:30.25, 3748MB)
14:00:18 #4 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
14:00:18 #5 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: TSSTcorp CDDVDW SH-S203B, Media type: DVD-R
Disc Manufacturer ID: <RITEKF> <1>
Disc Application Code: 64, Disc Physical Code: 193
14:00:18 #6 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
14:00:18 #7 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1919276 (1919276) = #1919276/426:30.26
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1919276 blocks [H: TSSTcorp CDDVDW SH-S203B]
--------------------------------------------------------------
14:00:18 #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
14:00:18 #10 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
14:00:18 #11 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
14:00:18 #12 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
14:00:18 #13 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
14:00:18 #14 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 8x (11.080 KB/s)
14:00:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
14:00:18 #16 Text 0 File DVDR.cpp, Line 3280
Recording mode: Sequential Recording Mode
14:00:18 #17 Text 0 File DVDR.cpp, Line 3434
Start write address at LBA 0
DVD high compatibility mode: Yes
Poz, jednu stvar ne kužim... Pržilo se sve u redu dosad, no ima problem. Stane na pola i baci error "Illegal disc". Zanima me samo što se događa te da li je do Samija ili DVD-a. Našao sam tu neke printable DVD-ove, stvarno ne znam proizvođača, piše gore: J4-05F60512221294H02.
Recorder: <TSSTcorp CDDVDW SH-S203B>Version: SB03 - HA 1 TA 3 - 8.3.2.1
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <SM3132A GMQ515L >Version: 1.01 - HA 1 TA 1 - 8.3.2.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : RAID0-410AS iaStorV Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L250S0 iaStorV Port 0 ID 1 DMA: Off
CdRomPeripheral : SM3132A GMQ515L 1.01 aapyocg2 Port 4 ID 0 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2045MB (2094800kB)
Free physical memory: 725MB (742972kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.5.2008
Burn DVD Image
14:00:18 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
14:00:18 #2 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media
14:00:18 #3 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1919275 (426:30.25, 3748MB)
14:00:18 #4 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
14:00:18 #5 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: TSSTcorp CDDVDW SH-S203B, Media type: DVD-R
Disc Manufacturer ID: <RITEKF> <1>
Disc Application Code: 64, Disc Physical Code: 193
14:00:18 #6 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
14:00:18 #7 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1919276 (1919276) = #1919276/426:30.26
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1919276 blocks [H: TSSTcorp CDDVDW SH-S203B]
--------------------------------------------------------------
14:00:18 #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
14:00:18 #10 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
14:00:18 #11 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
14:00:18 #12 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
14:00:18 #13 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
14:00:18 #14 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 8x (11.080 KB/s)
14:00:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
14:00:18 #16 Text 0 File DVDR.cpp, Line 3280
Recording mode: Sequential Recording Mode
14:00:18 #17 Text 0 File DVDR.cpp, Line 3434
Start write address at LBA 0
DVD high compatibility mode: Yes