PC Ekspert Forum - ATI Tray Tools 1.2.6.940

PC Ekspert Forum (https://forum.pcekspert.com/index.php)

- AMD Radeon (https://forum.pcekspert.com/forumdisplay.php?f=11)

- - ATI Tray Tools 1.2.6.940 (https://forum.pcekspert.com/showthread.php?t=47832)

ATI Tray Tools 1.2.6.940

Citiraj:

1.2.6.940
[F] Fixed bug when manual fan control can not be applied[*] Updated some translation files
[F] Fixed Old I2C Method to be compatible with X1xxx boards in memory voltage control procedure
[+] Added ability to change how ATT will react on "ATI HotKey poller" service. (in General options)[*] Updated Overdrive control procedure. Now you can set any available clocks for OverDrive even beyond the Catalyst limits!
And change GPU Voltage too.
[+] Added option to apply OverDrive settings on startup
[+] Added Portuguese (Brazilian) and Belorussian translations

http://downloads.guru3d.com/download.php?det=733

Citiraj:

News about next release
At this moment I'm finishing adding new method of overclocking for R5xx boards. This method will be called "Driver Level".
What will do this method:
1. Overclocking will be done by Catalyst itself like Overdrive
2. Voltage will be applied by driver for GPU and by ATT for memory
3. ATT will emulate Overdrive job, but will allow to set clocks when you want it instead of when you run full screen 3D application.
4. This should work even if you didn't disable ATI HotKey poller! And clocks will not resets by that service in 3D games
5. With this method clocks will not resets when you play any video files (checked on my 1800XT, no more resets)
6. More stable overclocking. Catalyst know HOW to do overclock job better that any other utils

A, imam ga već dva dana instaliranog-radi ok.:)

Za Saber_tooth-a ništa Ti nisi promijenio s tim neboj se.To je samo kako želiš gledati izraženu brzinu memorije(kako se lakše snalaziš-jasnije ti je na koliko radi u ddr ili kao sdr pa sam pomnožiš)

Citiraj:

Autor Matth€w (Post 533516)

? :D

ma forum je ponovo "pojeo" neke postove....:)

jel sa ovima rade titlovi na TV-u

Za to ti treba ffdshow ili VobSub filter...

imam Vobsub i radili su titlovi i onda su samo nestali
to se odnosi na tray tools kad stavim u extended desktop ili u clone mode da bude theater; znači ne mogu pustit film na telki i radit nešto drugo na monitoru; rade kad stavim na primary ali to mogu i windowsi za to mi ne treba tray tool

Uključi clone opciju s overlayem.

nije mi jasno kako jos na nema drivera za x1950,samo neki beta koji nisu nest....a i att ne radi...nemoze se voltaza dizat

da ni meni
@domy di uključim taj overlay nije valjda ovo pod video & color to mi ne radi mislim nemrem mijenjat

Citiraj:

Autor Dexxy (Post 539587)

nije mi jasno kako jos na nema drivera za x1950,samo neki beta koji nisu nest....a i att ne radi...nemoze se voltaza dizat

Strpite se malo-tek je izašao novi hardware-biti će podrška u drugoj reviziji.
Mislim da ATI Overclocker radi sa tom grafom.

Citiraj:

Autor mrtvi (Post 539604)

da ni meni
@domy di uključim taj overlay nije valjda ovo pod video & color to mi ne radi mislim nemrem mijenjat

Ti bi htio nešt radit na glavnom monitoru dok se na drugom monitoru/TV-u vrti film u fullscreenu, je li tako? Ako je, uključi taj drugi monitor/TV, ali ne da se proširi desktop na njega (extend) nego da imaš istu sliku na oba. Zatim prebaci u Theater Mode/Same as source video/4:3 (Standard TV) i to je to.

iz nekog glupog razloga više ne rade titlovi u theater modu : giljotin