|
Nero problem
Zdravo
Da nebi bio odgovor koristi opciju "traži" u obranu moram reči da sam pokušal već puno opcija ali jednostavno ne radi. Pržilica ( PHILIPS SPD2412T) mi neće pržit DVD (Traxdata ValuePack +R - oni zeleni, pokušao sam i sa drugima). Firmware sam updejtal na 1.5 i mijenjal brzine (8x, 6x, 4x) ali ne pomaže Uglavnom, evo: Windows XP 5.1 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2.11.2004 13:54:32 NT-SPTI used Nero Version: 7.5.1.1 Internal Version: 7, 5, 1, 1 Recorder: Adapter driver: Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Adapter driver: === Scsi-Device-Map === DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD2500JB-00REA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PHILIPS SPD2412T atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === PHILIPS SPD2412T E: CDRom0 HL-DT-ST DVD-ROM GDR8161B G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 639MB (654836kB) Free physical memory: 32MB (33276kB) Memory in use : 94 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.7.2008 ISO compilation 17:35:00 #1 Text 0 File Isodoc.cpp, Line 6510 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 17:35:00 #2 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 81920KB of Memory 17:35:00 #3 Text 0 File Reader.cpp, Line 126 Reader running 17:35:00 #4 Text 0 File Writer.cpp, Line 123 Writer E: PHILIPS SPD2412T running 17:35:00 #5 ISO9660GEN -11 File Geniso.cpp, Line 3313 First writeable address = 0 (0x00000000) 17:35:00 #6 Text 0 File Burncd.cpp, Line 3443 Turn on Disc-At-Once, using DVD media 17:35:01 #7 Text 0 File DlgWaitCD.cpp, Line 300 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1790591 (397:54.41, 3497MB) 17:35:01 #8 Text 0 File DlgWaitCD.cpp, Line 312 Write in overburning mode: NO (enabled: CD) 17:35:01 #9 Text 0 File DlgWaitCD.cpp, Line 2851 Recorder: PHILIPS SPD2412T, Media type: DVD+R Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2 Disc Application Code: 0, Extended Information Indicators: 3 17:35:01 #10 Text 0 File DlgWaitCD.cpp, Line 484 >>> Protocol of DlgWaitCD activities: <<< ========================================= 17:35:01 #11 Text 0 File ThreadedTransferInterface.cpp, Line 863 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1790592 (1790592) = #1790592/397:54.42 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1790592 blocks [E: PHILIPS SPD2412T] -------------------------------------------------------------- 17:35:01 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1079 Prepare recorder [E: PHILIPS SPD2412T] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3667132416, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1790592 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1790592 | 0 | 0x00 1790592 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 17:35:01 #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 17:35:01 #14 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 17:35:01 #15 Text 0 File Burncd.cpp, Line 4274 Cache writing successful. 17:35:01 #16 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 17:35:01 #17 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 6x (8.310 KB/s) 17:35:01 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2746 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 17:35:01 #19 Text 0 File Cdrdrv.cpp, Line 9215 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: RITEK... Media type ID: R03 Product revision number: 2 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8 23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 17:35:01 #20 SPTI -1065 File SCSIPassThrough.cpp, Line 291 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xDF 00 0F 00 00 01 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x06350600: Len x80 17:35:01 #21 SPTI -1065 File SCSIPassThrough.cpp, Line 291 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xDF 00 0F 00 00 01 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x06350600: Len x80 17:35:01 #22 Text 0 File DVDPlusRW.cpp, Line 662 Start write address at LBA 0 DVD high compatibility mode: No 17:35:33 #23 SPTI -1106 File SCSIPassThrough.cpp, Line 291 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x0c8c0000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 17:35:33 #24 CDR -1106 File Writer.cpp, Line 312 Power calibration error E: PHILIPS SPD2412T 17:35:33 #25 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 17:35:33 #26 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 17:35:34 #27 SPTI -1046 File SCSIPassThrough.cpp, Line 291 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x06 CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06 17:35:34 #28 SPTI -1065 File SCSIPassThrough.cpp, Line 291 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xDF 00 0F 00 00 01 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x06350600: Len x80 17:35:34 #29 SPTI -1065 File SCSIPassThrough.cpp, Line 291 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xDF 00 0F 00 00 01 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x06350600: Len x80 17:35:34 #30 CDR -1046 File WriterStatus.cpp, Line 167 Illegal disc E: PHILIPS SPD2412T 17:35:34 #31 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 17:35:34 #32 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 6x (8.310 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19.5.2006 23:16:24 File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 21.2.2008 04:05:38 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Unaprijed hvala |
Probao neke druge medije?
|
@Jurrasic je li ti imas isto problem sa illegal disc?Vidim da si postao i u toj temi to se obicno javlja ako prza ne moze prepoznati medij ili kad je pri kraju..
|
Budem danas kupil malo više različitih DVD-a pa bumo vidli jel bude kojeg prepoznal.
Pod kaj misliš "kad je pri kraju", na pržilicu? Prza je relativno nova, ni godinu dana stara. |
| Sva vremena su GMT +2. Sada je 10:16. |
Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 1999-2024 PC Ekspert - Sva prava pridržana ISSN 1334-2940
Ad Management by RedTyger