Catalyst 8.11

Jelc · 13.11.2008., 10:52

New Features
This section provides information on new features found in this release of the
Radeon™ Display Driver. These include the following:
• ATI CrossFireX™ Enhancements
• HydraVision Support for Windows XP
• New Display Enhancements
• Performance Improvements
ATI CrossFireX™ Enhancements
This release of ATI Catalyst™ enables users to verify whether an application is running in ATI CrossFireX™ mode. The new option found in the ATI Catalyst™
Control Center system tray, will allow users to verify whether a Direct3D or
OpenGL application is running in ATI CrossFireX™ mode. (The “ATI Cross-
FireX” logo will be shown on screen when the application is running).

HydraVision Support for Windows XP

This release of ATI Catalyst™ introduces HydraVision support for the ATI Catalyst ™ Control Center under Windows XP. HydraVision enables users to more efficiently organize multiple applications across single or multiple displays. Highlights include:
• HydraGrid – A new feature found in HydraVision that divides the Windows desktop into user definable areas. This helps users to more easily move and organize multiple applications.
• HydraVision Hotkeys – The ATI Catalyst™ Control Center Hotkey Manager can assist users to quickly setup and define their HydraVision specific hotkey commands.
• HydraVision Virtual Desktops – Users can configure up to 9 different virtual desktops. This enables users to manage and group multiple applications across each user defined desktop. Application positions, desktop associations and display settings can be saved for every virtual desktop.
• HydraVision Wizard – Using the ATI Catalyst™ Control Center Wizard, users can configure their HyrdaVision settings with ease.

Resolved Issues for the Windows XP Operating System

This section provides information on resolved issues in this release of the ATICatalyst™ Software Suite for Windows XP. These include:
• “Lower Resolution” message displayed when attempting to play HD content using winDVD
• Running certain OpenGL applications may intermittently cause the system to stop responding
• Some desktop corruption may be noticed when playing standard definition video while exiting full screen DOS
• Overlay rotation failing under Windows XP
• Hot unplugging the secondary device with Clone Mode enabled may cause video playback instability
• With Clone Mode and Overlay Theater Mode enabled some video playback may fail to render properly
• Some corruption may be noticed during video playback on Cyberlink winDVD7 and rotate desktop
• Midway “Stranglehold” may become
New Display Enhancements
This release of ATI Catalyst™ Linux introduces support for display scaling to
resize the display devices that support TV timings (480i/p, 720p, 1080i, 1080p)
through either digital (DVI or HDMI) or analog (component) interfaces.
Performance Improvements
The following performance gains are noticed with this release of Catalyst™
FarCry 2 – performance gains of 3 to 10% for Single card mode and 8 to 14% in
Crossfire mode, with some specific configurations showing even greater improvements.
Performance gains were noticed on all Radeon HD4xxx and Radeon
HD3xxx products.
S.T.A.L.K.E.R.: Clear Sky – performance gains of 6 to 18% in single card settings
and 10 to 30% in CrossfireX mode. Performance gains were noticed on all
Radeon HD04xxx and Radeon HD3xxx products.

http://ati.amd.com/support/driver.HTML

sipe · 13.11.2008., 11:50

Lijepo, popravili su performanse i 3xxx verzije

LouisCyphere · 13.11.2008., 12:10

to miki!

atha · 14.11.2008., 11:06

Znaci u 8.12 se mogu ocekati fixevi za CoD5. Do tada cu onda pricekati, ovo odze me ne interesuje.

A.J. · 14.11.2008., 18:14

hvala ti care na obavijesti

. nakon instalacije radi mi openGL. sa prijasnjim mi nije radio otkad imam SP3
lijep je feeling koristit explore mode u Archicadu :P

BlackDwarf · 14.11.2008., 20:10

Ocistio sam stare drivere i ccc sa driver cleanerom. Nakon instalacije novih drivera, ne mogu uc u CCC. Prijavi mi da novi CCC nema basic view nego samo advanced view. Kada kliknem na advanced nista se ne dogodi.

Dizel · 14.11.2008., 23:08

Evo ja instalirao 8.11 kao i obicno

Preljepio ih preko 8.9 u Windozama i restartao sistem bez problema, jebes drivercleaner i ostale guru-spike. CrossFire radi bez frke naravno.

domy_os · 15.11.2008., 14:39

Više nema GART i South Bridge drivera u paketu ili ja nešto krivo gledam?

Warrior · 15.11.2008., 18:00

Performanse nikakve nisam primjetio u FarCry 2, barem ne po FarCry 2 benchmarku. Dapače, pred kraj benchmarka imam veće rupe u grafu, tj. minimalni FPS mi je sada 16, a na 8.10. driverima bio je 19.

thedream · 16.11.2008., 12:42

Počistio sa Driver Sweeperom pa stavio,ok zasad (Far Cry2,HL2 - Orangebox, ETQW,UT3,WoW,Fifa09)

BlackDwarf · 16.11.2008., 12:56

Meni se klalo sa SP3 na XP-u. Sad sam stavio na server08 i radi normalno.

Sadgasm · 17.11.2008., 14:06

stavio preko 8.9 i radi sve ok,nego jel hydraGrid samo za vistu ili ide i na xp(ako ide ne vidim di je to :S )

Metamphetamine · 17.11.2008., 14:43

Citiraj:

Autor Sadgasm

stavio preko 8.9 i radi sve ok,nego jel hydraGrid samo za vistu ili ide i na xp(ako ide ne vidim di je to :S )

Ajd ponovo pročitaj "new features"

Jelc · 17.11.2008., 14:55

Citiraj:

Autor Dizel

Evo ja instalirao 8.11 kao i obicno

Preljepio ih preko 8.9 u Windozama i restartao sistem bez problema, jebes drivercleaner i ostale guru-spike. CrossFire radi bez frke naravno.

i dan-dva nakon na drugoj temi:

Citiraj:

Autor Dizel

Nego neki dan sam primijetio da mi se nekad ne ukljuci CrossFire u igrama, vec moram rebootat komp da bi ga prihvatio, tocnije igre rade samo na primarnoj kartici, a druga ostaje u idleu. Da li je to zbog toga sto jedna ima PowerPlay mogucnost, a druga ne ili ploca ne ukljuci obje kartice?

Kiko.hr · 17.11.2008., 15:00

Imao sam dosad 8.10, i tamo sam lijepo s riva tunerom oc-ao kako sam htio, sve super (vista 64bit), i sad stavio 8.11 i kitaaa! Nemrem OCat nigdje! AMD GPU TOOL, ATI Tool, Riva Tuner, Power nesto..
U svakom programu stavim neku frekvu, applayam i on vrati na staru :s

S overdriveom sam sad OCao, al to nije dosta..jer ide vise nego mi on dopusta :s

Pokusao sam stavit opet 8.10 drivere, unistalirao 8.11, cak sam i pocistio s driver cleanerom, ali dok se driveri instaliraju i restartam komp ne radi.. 60Hz osvjezenje, bez ccc-a i sve u k***u. Tak da sam sad na 8.11 opet, al bez OC-a.

Rjesenje neko? O.o

hvala

Metamphetamine · 17.11.2008., 15:12

Citiraj:

Autor Jelc

i dan-dva nakon na drugoj temi:

hehe

Sadgasm · 17.11.2008., 15:20

Citiraj:

Autor Metamphetamine

Ajd ponovo pročitaj "new features"

Mislis na ovo : "HydraVision Support for Windows XP"? Instalirao no ne nudi mi hidraGrid,samo hydravision desktop managment i multidesk.

Metamphetamine · 17.11.2008., 17:01

Citiraj:

Autor Sadgasm

Mislis na ovo : "HydraVision Support for Windows XP"? Instalirao no ne nudi mi hidraGrid,samo hydravision desktop managment i multidesk.

Mislio sam na ovo :

HydraVision Support for Windows XP

This release of ATI Catalyst™ introduces HydraVision support for the ATI Catalyst ™ Control Center under Windows XP. HydraVision enables users to more efficiently organize multiple applications across single or multiple displays. Highlights include:
• HydraGrid – A new feature found in HydraVision that divides the Windows desktop into user definable areas. This helps users to more easily move and organize multiple applications.

Dizel · 17.11.2008., 19:34

Citiraj:

Autor Jelc

i dan-dva nakon na drugoj temi:

Panju stari, ovo nije zbog drivera ili instalacije istih, nego mi nesto onemogucava CF u igrama. Dali ATT ili stodrugo, pojma nemam.

DraŽ · 17.11.2008., 20:11

Na bugu pise da ce u verziji 8.12, serija hd4*** dobiti podrsku za "ati stream" i da ce u ccc ukljuciti avivo converter koji koristi stream procesore sa grafičke za dekodiranje,kodiranje videa!!!

Veki-os · 17.11.2008., 20:12

BUG Lol

Jelc · 17.11.2008., 21:28

Citiraj:

Autor Dizel

Panju stari, ovo nije zbog drivera ili instalacije istih, nego mi nesto onemogucava CF u igrama. Dali ATT ili stodrugo, pojma nemam.

Dizel · 17.11.2008., 21:45

Zanimljivo je da Čmark 06 uredno ukljuci obje kartice, ali igre ne. Vjerovatno su Windoze nakon 3 godine zrele za reinstall ili Format C:

domis · 18.11.2008., 01:55

zna netko kako povecati OC granice u CCC ili kako preko CCC staviti 2d i 3d taktove?

nebi bas petljao po biosu, ipak grafu mislim skuriti dok dojde EOL (ako bu jos gara vrijedila

)

Pippincro · 18.11.2008., 08:04

Citiraj:

Autor d'beast

zna netko kako povecati OC granice u CCC ili kako preko CCC staviti 2d i 3d taktove?

nebi bas petljao po biosu, ipak grafu mislim skuriti dok dojde EOL (ako bu jos gara vrijedila

)

Oc granice u samom ccc-u neces moci promijeniti, ali kakve taktove postavis tamo ti ce ti vrijediti za 3d mode, a u 2d ce se vracati na tvornicke 2d postavke.

domis · 18.11.2008., 09:52

hm...a ccc nema mogucnosti nastelavanja 2d taktova?

ShAd0w_dAnCeR · 18.11.2008., 10:47

Citiraj:

Autor Dizel

Panju stari, ovo nije zbog drivera ili instalacije istih, nego mi nesto onemogucava CF u igrama. Dali ATT ili stodrugo, pojma nemam.

zivio driver cleaner?

Veki-os · 18.11.2008., 11:12

Citiraj:

Autor d'beast

zna netko kako povecati OC granice u CCC ili kako preko CCC staviti 2d i 3d taktove?

nebi bas petljao po biosu, ipak grafu mislim skuriti dok dojde EOL (ako bu jos gara vrijedila

)

Možeš povečati OC granice jer je serija 4800 ustvari zaključana.
Prouči ove linkove da sad ja ne pišem opet sve što je napisano tamo

http://forum.pcekspert.com/showthread.php?t=118175
http://www.xtremesystems.org/forums/...d.php?t=197219

Pippincro · 18.11.2008., 11:52

Citiraj:

Autor Veki-os

Možeš povečati OC granice jer je serija 4800 ustvari zaključana.
Prouči ove linkove da sad ja ne pišem opet sve što je napisano tamo

http://forum.pcekspert.com/showthread.php?t=118175
http://www.xtremesystems.org/forums/...d.php?t=197219

normalno da moze, ali on je pitao dal to moze iz ccc, bez prckanja po biosu

Od tamo nemoze, jer je lokirano na odredjenu vrijednost. E sad, drugim biosom i preko rive se moze (te drugih alata), a za ccc bi se u teoriji moglo kada rucno editiras profile koje si kreirao preko ccc-a (tamo mozes sloziti i 2d/3d profile, ali ih rucno palis) i tamo forsiras druge vrijednosti, medjutim opet ce ovisiti o biosu i kakve su tamo vrijednosti slozene.

DraŽ · 18.11.2008., 13:37

a da jednostavno koristis att?? Tamo mozes stavit i na 1THz core clock!!!

13.11.2008., 10:52	#1
Jelc Super Moderators Datum registracije: May 2002 Lokacija: Zg Postovi: 17,469	Catalyst 8.11 New Features This section provides information on new features found in this release of the Radeon™ Display Driver. These include the following: • ATI CrossFireX™ Enhancements • HydraVision Support for Windows XP • New Display Enhancements • Performance Improvements ATI CrossFireX™ Enhancements This release of ATI Catalyst™ enables users to verify whether an application is running in ATI CrossFireX™ mode. The new option found in the ATI Catalyst™ Control Center system tray, will allow users to verify whether a Direct3D or OpenGL application is running in ATI CrossFireX™ mode. (The “ATI Cross- FireX” logo will be shown on screen when the application is running). HydraVision Support for Windows XP This release of ATI Catalyst™ introduces HydraVision support for the ATI Catalyst ™ Control Center under Windows XP. HydraVision enables users to more efficiently organize multiple applications across single or multiple displays. Highlights include: • HydraGrid – A new feature found in HydraVision that divides the Windows desktop into user definable areas. This helps users to more easily move and organize multiple applications. • HydraVision Hotkeys – The ATI Catalyst™ Control Center Hotkey Manager can assist users to quickly setup and define their HydraVision specific hotkey commands. • HydraVision Virtual Desktops – Users can configure up to 9 different virtual desktops. This enables users to manage and group multiple applications across each user defined desktop. Application positions, desktop associations and display settings can be saved for every virtual desktop. • HydraVision Wizard – Using the ATI Catalyst™ Control Center Wizard, users can configure their HyrdaVision settings with ease. Resolved Issues for the Windows XP Operating System This section provides information on resolved issues in this release of the ATICatalyst™ Software Suite for Windows XP. These include: • “Lower Resolution” message displayed when attempting to play HD content using winDVD • Running certain OpenGL applications may intermittently cause the system to stop responding • Some desktop corruption may be noticed when playing standard definition video while exiting full screen DOS • Overlay rotation failing under Windows XP • Hot unplugging the secondary device with Clone Mode enabled may cause video playback instability • With Clone Mode and Overlay Theater Mode enabled some video playback may fail to render properly • Some corruption may be noticed during video playback on Cyberlink winDVD7 and rotate desktop • Midway “Stranglehold” may become New Display Enhancements This release of ATI Catalyst™ Linux introduces support for display scaling to resize the display devices that support TV timings (480i/p, 720p, 1080i, 1080p) through either digital (DVI or HDMI) or analog (component) interfaces. Performance Improvements The following performance gains are noticed with this release of Catalyst™ FarCry 2 – performance gains of 3 to 10% for Single card mode and 8 to 14% in Crossfire mode, with some specific configurations showing even greater improvements. Performance gains were noticed on all Radeon HD4xxx and Radeon HD3xxx products. S.T.A.L.K.E.R.: Clear Sky – performance gains of 6 to 18% in single card settings and 10 to 30% in CrossfireX mode. Performance gains were noticed on all Radeon HD04xxx and Radeon HD3xxx products. http://ati.amd.com/support/driver.HTML __________________

13.11.2008., 11:50	#2
sipe Premium Moj komp Datum registracije: Jun 2007 Lokacija: Samobor Postovi: 984	Lijepo, popravili su performanse i 3xxx verzije __________________ CellMapper INFO Vađenje šifri i debrand Fritz 7360 H1

13.11.2008., 12:10	#3
LouisCyphere Premium Moj komp Datum registracije: Mar 2007 Lokacija: Sl.Brod Postovi: 270	to miki! __________________ Who is General Failure and why is he reading my disk?

14.11.2008., 11:06	#4
atha Moderator Moj komp Datum registracije: Jan 2005 Lokacija: Rijeka Postovi: 8,918	Znaci u 8.12 se mogu ocekati fixevi za CoD5. Do tada cu onda pricekati, ovo odze me ne interesuje. __________________ ___________ HTPC: Intel Core2Duo E8500 × ATI Sapphire HD4670 HDMI × 2x 1GB DDR2 × Samsung 160GB × Lenovo Key+Mouse × Philips 49PFS5501 LED TV × Technics SA-EH780 5.1 × Windows 10 Laptop1: Lenovo x100e w/Windows 10

14.11.2008., 23:08	#7
Dizel 3.14zda ® Moj komp Datum registracije: Nov 2005 Lokacija: Orahovica Postovi: 8,311	Evo ja instalirao 8.11 kao i obicno Preljepio ih preko 8.9 u Windozama i restartao sistem bez problema, jebes drivercleaner i ostale guru-spike. CrossFire radi bez frke naravno. __________________

14.11.2008., 18:14	#5
A.J. Premium Moj komp Datum registracije: Dec 2006 Lokacija: Rijeka (Umag) Postovi: 1,197	hvala ti care na obavijesti . nakon instalacije radi mi openGL. sa prijasnjim mi nije radio otkad imam SP3 lijep je feeling koristit explore mode u Archicadu :P

14.11.2008., 20:10	#6
BlackDwarf BIND SOFT d.o.o. Moj komp Datum registracije: Feb 2006 Lokacija: Novska Postovi: 2,277	Ocistio sam stare drivere i ccc sa driver cleanerom. Nakon instalacije novih drivera, ne mogu uc u CCC. Prijavi mi da novi CCC nema basic view nego samo advanced view. Kada kliknem na advanced nista se ne dogodi.

15.11.2008., 14:39	#8
domy_os EMP moderator Datum registracije: Apr 2005 Lokacija: Osijek Postovi: 18,406	Više nema GART i South Bridge drivera u paketu ili ja nešto krivo gledam? __________________ "Kako su krojači novog svjetskog poretka uspjeli u tako kratko vrijeme slomiti intelektualne sposobnosti društva, uništiti kritičku svijest i ljudima nametnuti izvrnutu logiku?"

15.11.2008., 18:00	#9
Warrior Premium Moj komp Datum registracije: Nov 2006 Lokacija: Zagreb Postovi: 980	Performanse nikakve nisam primjetio u FarCry 2, barem ne po FarCry 2 benchmarku. Dapače, pred kraj benchmarka imam veće rupe u grafu, tj. minimalni FPS mi je sada 16, a na 8.10. driverima bio je 19. __________________ Everything is sooooo slow... Why? Oh, why?

16.11.2008., 12:42	#10
thedream Banned Moj komp Datum registracije: Nov 2005 Lokacija: Zagreb ( Šibenik ) Postovi: 5,456	Počistio sa Driver Sweeperom pa stavio,ok zasad (Far Cry2,HL2 - Orangebox, ETQW,UT3,WoW,Fifa09)

16.11.2008., 12:56	#11
BlackDwarf BIND SOFT d.o.o. Moj komp Datum registracije: Feb 2006 Lokacija: Novska Postovi: 2,277	Meni se klalo sa SP3 na XP-u. Sad sam stavio na server08 i radi normalno.

17.11.2008., 14:06	#12
Sadgasm Premium Moj komp Datum registracije: Jul 2006 Lokacija: Zagreb Postovi: 177	stavio preko 8.9 i radi sve ok,nego jel hydraGrid samo za vistu ili ide i na xp(ako ide ne vidim di je to :S )

17.11.2008., 15:00	#15
Kiko.hr Premium Datum registracije: Mar 2005 Lokacija: Cakovec Postovi: 84	8.11 driver i i overclock?! Imao sam dosad 8.10, i tamo sam lijepo s riva tunerom oc-ao kako sam htio, sve super (vista 64bit), i sad stavio 8.11 i kitaaa! Nemrem OCat nigdje! AMD GPU TOOL, ATI Tool, Riva Tuner, Power nesto.. U svakom programu stavim neku frekvu, applayam i on vrati na staru :s S overdriveom sam sad OCao, al to nije dosta..jer ide vise nego mi on dopusta :s Pokusao sam stavit opet 8.10 drivere, unistalirao 8.11, cak sam i pocistio s driver cleanerom, ali dok se driveri instaliraju i restartam komp ne radi.. 60Hz osvjezenje, bez ccc-a i sve u k***u. Tak da sam sad na 8.11 opet, al bez OC-a. Rjesenje neko? O.o hvala

17.11.2008., 20:11	#20
DraŽ Premium Datum registracije: Jan 2008 Lokacija: Miami, 1984, Ferrari F40 Postovi: 902	Na bugu pise da ce u verziji 8.12, serija hd4*** dobiti podrsku za "ati stream" i da ce u ccc ukljuciti avivo converter koji koristi stream procesore sa grafičke za dekodiranje,kodiranje videa!!!

17.11.2008., 20:12	#21
Veki-os Premium Moj komp Datum registracije: Jun 2004 Lokacija: Osijek Postovi: 3,968	BUG Lol

Oglasni prostor
PC Ekspert Forum Oglas

17.11.2008., 21:45	#23
Dizel 3.14zda ® Moj komp Datum registracije: Nov 2005 Lokacija: Orahovica Postovi: 8,311	Zanimljivo je da Čmark 06 uredno ukljuci obje kartice, ali igre ne. Vjerovatno su Windoze nakon 3 godine zrele za reinstall ili Format C: __________________

18.11.2008., 01:55	#24
domis Premium Moj komp Datum registracije: Sep 2006 Lokacija: Hrvatistan Postovi: 4,159	zna netko kako povecati OC granice u CCC ili kako preko CCC staviti 2d i 3d taktove? nebi bas petljao po biosu, ipak grafu mislim skuriti dok dojde EOL (ako bu jos gara vrijedila )

18.11.2008., 09:52	#26
domis Premium Moj komp Datum registracije: Sep 2006 Lokacija: Hrvatistan Postovi: 4,159	hm...a ccc nema mogucnosti nastelavanja 2d taktova?

18.11.2008., 13:37	#30
DraŽ Premium Datum registracije: Jan 2008 Lokacija: Miami, 1984, Ferrari F40 Postovi: 902	a da jednostavno koristis att?? Tamo mozes stavit i na 1THz core clock!!!