Ajde se ulogiraj na switch, odi na MONITORING / CABLE TEST.
Zatim pogledaj sta ce ti izbacit kao rezultat.
OVO SU KORACI ZA TEST
Follow these steps to diagnose the cable:
1)Select your desired port for the test and click*Apply.
2)Check the test results in the*Result*section.
Pair
Displays the Pair number.
Status
Displays the cable status. Test results include normal, closed, open and crosstalk.
Normal : The cable is connected normally.
Closed: A short circuit is being caused by abnormal contact of wires in the cable.
Open: No device is connected to the other end or the connection is broken.
Crosstalk: Impedance mismatch due to the poor quality of the cable.
Length
If the connection status is normal, the length range of the cable is displayed.
Fault Location
If the connection status is short, close or crosstalk, here displays the length from the port to the trouble spot.
NAPOMENA:
spoji se prvo laptopom direktno u switch sa patch kabelom i napravi test na njemu, da vidis kakav rezultat treba biti kada imas gigabitni link.
Zatim napravi test na ostalim portovima (prije tog naravno ustekaj laptop u prikljucnicu u stanu, i tako idi jednu po jednu).
Javi rezultat.