Citiraj:
Autor igorba
1) Svakako nadogradi fw na verziju 1.09
2) Probaj obrisati drugim software-om (npr. CloneCD)
|
Evo stavio sam 1.09 bitsetting verziju, te skinuo ImgBurn koji veli ovo:
_NEC DVD_RW ND-4550A 1.09 (ATA)
Current Profile: DVD-ROM
Disc Information:
Status: Complete
Erasable: No
Sessions: 1
Sectors: 2.295.104
Size: 4.700.372.992 bytes
Time: 510:03:29 (MM:SS:FF)
Supported Write Speeds: 6x; 8x
TOC Information:
Session 1...
-> Track 01 (Mode 1, LBA: 0 - 2295103)
-> LeadOut (LBA: 2295104)
Physical Format Information (ADIP):
Disc ID: MKM-A03-00
Book Type: DVD+RW
Part Version: 3
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 2.491.711
Last Physical Sector in Layer 0: 0
Physical Format Information (Last Recorded):
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: 10.08Mbps
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 2.491.711
Last Physical Sector in Layer 0: 0
Current Format Capacity:
Sectors: 2.295.104
Size: 4.700.372.992 bytes
Time: 510:03:29 (MM:SS:FF)
Preferred Format Capacity:
Sectors: 2.295.104
Size: 4.700.372.992 bytes
Time: 510:03:29 (MM:SS:FF)
Maximum Format Capacity:
Sectors: 2.295.104
Size: 4.700.372.992 bytes
Time: 510:03:29 (MM:SS:FF)
Probao sam mijenjati bitsetting no bezuspješno, napravio Quick i Full Erase uspješno sa ImgBurnom i dalje je DVD-ROM, no vidim gore da iz ADIPa čita da je DVD+RW, nije mi jasno. Jeli to do mog snimača ili medija?
EDIT: Evo riješio sam problem, pa ako neko naiđe na sličnu situaciju evo ukratko... Prvi put kad sam pržio ovaj Verbatimov DVD+RW u Neri, "on" ga je formatirao i postavio booktype na DVD-ROM, poslije toga problemi. Flashao sam pržu sa najnovijim firmwareom i u binflashu, ImgBurnu i još par programa probao vratiti booktype za +RW sa DVD-ROM natrag na +RW i ništa. Medij je i dalje bio DVD-ROM, tek kad bi ga izbacio i ubacio prijavljivao se kao DVD+RW, no kad sam probao snimati bilo sa Nerom ili ImgBurnom odma je javio da disk nije prazan i vratio media-type na DVD-ROM. Riješenje sam našao sa programom DVDInfoPro s kojim sam "vratio" booktype, no situacija je bila ista, opet DVD-ROM, ali ovaj put sam otvorio Neru kao prije i probao na postavkama recordera maknuti booktype sa "Automatic na "Physical disc type"(kao prije), izbacio, ubacio da ga prijavi kao DVD+RW i ovaj put mi je dao snimati no prije snimanja je postavio natrag booktype na DVD+RW i sada medij radi bez problema. Eto ja reko ukratko a ono esej pišem
.