[Miha-Đakovo]

Autor domy_os

Na ploči iz siga/moj komp? Kad uđeš u BIOS, stisni CTRL+F1, uđi u Integrated Peripherals i tu je negdje...

Evo ovo imam pod tom karticom :

Integrated Peripherals

Serial-ATA RAID Config

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Serial-ATA RAID Config
Item Help
Menu Level

􀁠

NV SATA RAID function [Disabled]

x NV SATA 1 Primary RAID Disabled
x NV SATA 1 Secondary RAID Disabled
x NV SATA 2 Primary RAID Disabled
x NV SATA 2 Secondary RAID Disabled
x NV SATA 3 Primary RAID Disabled
x NV SATA 3 Secondary RAID Disabled

􀁋􀁌􀁊􀁉

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F11/12: Profile F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Integrated Peripherals

􀁠

Serial-ATA RAID Config [Press Enter]
On-Chip IDE Channel0 [Enabled]
On-Chip MAC Lan [Auto]
On-Chip MAC1 Lan 1 [Auto]
NV Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]
Onboard Audio Function [Auto]

􀁠

SMART LAN [Press Enter]
Onboard 1394 [Enabled]
Onboard LAN Boot ROM [Disabled]
Onboard SATA/IDE Ctrl Mode 1 [IDE]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]

x ECP Mode Use DMA 3

On-Chip USB [V1.1+V2.0]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]

Legacy USB Storage detect [Enabled]


Šta ovo znači :

Onboard SATA/IDE Ctrl Mode

RAID Set the onboard SATA controller to RAID mode.
AHCI Set the onboard SATA controller to AHCI mode. Advanced Host Controller
Interface (AHCI) is an interface specification that allows the storage driver to
enable advanced Serial ATA features such as Native Command Queuing and
hot plug. For more details about AHCI, please visit Intel's website.

IDE Set the onboard SATA controller to IDE mode. (Default value)