[Dizel]

Autor igorba

Ma znam, kao i sve druge prže, nego kažeš da su ti "dali linkove za jednostavnije flashanje Optiarca", pa pitam kako si dosad flashao. Ma, nema veze, samo usput pitah.
Bitno da je proradilo kako treba.

BTW, moj tisućiti post. Jesam spor, neki su nakupili više u duplo manje staža. Lijen za pisanje...

Pa cuj, kad vidis ovu proceduru koju sam prvu nasao, ovo sto mi je Buki dosapnuo je piece of cake...pazi sad ovu prvu verziju na koju sam odljepio i odlucio bolje przu baciti kroz prozor nego to sve napraviti prije flashanja:

Pls note following instructions for update procedure:

Connect drive to secondary IDE channel as Master

Disconnect all slave hardware from IDE secondary Master

Use standard UDMA-2 IDE cable

Update in Windows "Safe Mode"

Under Windows 2000 & XP login as administrator

Update without DMA mode, under Windows XP & 2000 in the device manager - "IDE ATA/ ATAPI controllers", you can switch from DMA to PIO mode

Disconnect all external USB/ FireWire devices.

Deactivate virusscanners, active desktop programs and packetwriting agents

Do not turn off power during the updating process.


Note: Warranty will be lost during false updating procedure, especially unofficial modified firmwares were used before.
In such cases we could not offer you a solution any more. You have to repair it by cost then.