A da, sad se sjetio da smo pričali o tom "slučaju" ...
Plan (a i ta perverzija za test potvrđuje), sa rpi je dobar.
I da, ako je auto detektiran kao 3010 model onda neće raditi jer je to krivi drajver, treba instalirati baš za 3020:
Code:
1) Go to the Xerox driver dowloads: https://www.support.xerox.com/suppor...ngSystem=linux
Alt: https://www.support.xerox.com/en-us/content/129620
2) Download and unpack the driver.
3) Run 'install-printer.sh' via the terminal.
4) Go to the System Properties => Printers => Additional printer settings...
5) Double click your printer in the opened window.
6) You should see the Xerox phaser 3010 as the printer model. Click 'Change..' button.
7) Pick the Xerox manufacturer from the list, hit the 'Next' button and you should see the proper 'Xerox Phaser 3020' driver in the list. If you haven't installed the Xerox Linux driver yet you have just the current 'Xerox phaser 3010' there.
8) Click 'Apply' and try to print the test page.
9) Have fun.
Kada to prođe onda se vratiš u CUPS i ako ga sam ne detektira onda ga dodaš ručno, nakon toga ide klasika i std. savjeti oko share printera prko CUPS - a.