[domy_os]

Autor tomek@vz

@domy_os > kreni od kernel modula. Dali je potreban kernel modul aktivan/loadan?

Tu i je problem što ga nema, ništa se ne dogodi kada ga pokušam dodati, znači da ne postoji u kernelu.

root@Domy-NAS:/var/log# modprobe em28xx
root@Domy-NAS:/var/log# lsmod | grep -i em28xx
root@Domy-NAS:/var/log#

Dok mi je recimo UPS odmah prepoznao i surađuje kako spada.

root@Domy-NAS:/var/log# cat ups.log
2023-01-28T04:08:48+01:00 Domy-NAS synoups: synoups online
2023-01-28T04:08:48+01:00 Domy-NAS synoups: =====log UPS status start=====
2023-01-28T04:08:48+01:00 Domy-NAS synoups: device.mfr=American Power Conversion
2023-01-28T04:08:48+01:00 Domy-NAS synoups: device.model=Back-UPS CS 500
2023-01-28T04:08:48+01:00 Domy-NAS synoups: battery.charge=100
2023-01-28T04:08:48+01:00 Domy-NAS synoups: battery.runtime=1642
2023-01-28T04:08:48+01:00 Domy-NAS synoups: battery.voltage=13.7
2023-01-28T04:08:48+01:00 Domy-NAS synoups: input.voltage=246.0
2023-01-28T04:08:48+01:00 Domy-NAS synoups: output.voltage=230.0
2023-01-28T04:08:48+01:00 Domy-NAS synoups: ups.load=34.0
2023-01-28T04:08:48+01:00 Domy-NAS synoups: ups.status=OL
2023-01-28T04:08:48+01:00 Domy-NAS synoups: =====log UPS status end=====

Autor c-shadow

https://linux-hardware.org/index.php?id=usb:2040-8265

The device is supported by kernel versions 4.14 and newer according to the LKDDb

Imaš detaljnije ovdje, ali primjeti da se tu radi o USB device ID 2040:0265 dok tebi prikazuje 2040:8265:
https://linuxtv.org/wiki/index.php/H...e_WinTV-dualHD

Da, vidio sam to, izgleda da je ipak star kernel i treba patch. Našao sam još ovaj link:

https://forum.turris.cz/t/dvb-c-usb-...ssues/11383/16

I ovdje je frajer uspio osposobiti ID 2040:026d s kernelom 4.4, znači ista generacija, samo za ATSC.

https://github.com/th0ma7/synology

Valjalo bi probati prvo na RPi pa ako šljaka, primijeniti i na NAS, ne zeza mi se baš s recoveryem u ovom trenutku.