Citiraj:
Autor 2 die 4
Da ne otvaram novu temu pitat ću ovdje.
Kupio sam ploču od bukve i složio stol. Prije stavljanja bilo čega sam si ploču premazao lanenim uljem i to ostavio preko noći i prebrisao kasnije krpom.
Sada nakon 3 tjedna vidim da to nije doboljno zaštite, gubi se polako, bljedi. Valjda se upija i ja nešto pokupim dok se naslanjam. Majice mi nisu masne i slično.
Mene interesira neko trajnije rješenje ali da ne moram ploču micati i cijeli stan zasmrditi nekim lakom.
Ima li neko sredstvo, lak, premaz, bilo šta što je trajnije od ovog ulja i da možda dobije i na sjaju, jer mi je ova boja drva do jaja?
Tenks.
BTW ploča je 230cm x 80cm x 28mm.
|
https://ardec.ca/en/blog/22/linseed-...wood-finishing
"Painted, varnished or waxed wood will therefore need to be cleaned and/or stripped to bare wood before proceeding with linseed oil application. The surface must be sanded and dusted to ensure good penetration. Typically,
three coats at
12 to 24 hour intervals are sufficient. When the last coat is completely dry, a light hand polishing can be done: This will enhance the satin finish and smooth the texture.
Once it's done, plan for maintenance once a year or as needed (twice a year on floors). Superficial scratches can be easily repaired with a small application of oil locally."