Citiraj:
Autor Mihael
|
Jesam, međutim ja na listi nemam uopće taj drugi disk (/dev/sdb). Evo moje liste
Code:
1 1049kB 256MB 255MB primary ext2 boot
2 257MB 21.0GB 20.7GB extended
5 257MB 21.0GB 20.7GB logical lvm
I to je sve ovaj "prvi" disk. Nadalje,
df -h mi daje sljedeće:
Code:
udev 2.0G 4.0K 2.0G 1% /dev
tmpfs 396M 628K 395M 1% /run
/dev/dm-0 15G 3.0G 12G 21% /
none 4.0K 0 4.0K 0% /sys/fs/cgroup
none 5.0M 0 5.0M 0% /run/lock
none 2.0G 0 2.0G 0% /run/shm
none 100M 0 100M 0% /run/user
/dev/sda1 236M 74M 150M 34% /boot
Citiraj:
Autor cccp
Ovak na slijepo, je li to error pa komanda nije izvrsena ili samo upozorenje?
Sta ti je sada u '/etc/fstab' (`cat /etc/fstab`) i sta pokazuje `lsblk -a`?
|
Koliko vidim, samo upozorenje/informacija:
Code:
Information: You may need to update /etc/fstab.
u /etc/fstab imam ovo:
Code:
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/graylog--vg-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=f3c82967-d226-4c5a-99bd-2ecb6a31adfc /boot ext2 defaults $
/dev/mapper/graylog--vg-swap_1 none swap sw 0 0
A lsblk -a mi daje sljedeći rezultat:
Code:
fd0 2:0 1 4K 0 disk
sda 8:0 0 19.5G 0 disk
├─sda1 8:1 0 243M 0 part /boot
├─sda2 8:2 0 1K 0 part
└─sda5 8:5 0 19.3G 0 part
├─graylog--vg-root (dm-0) 252:0 0 15.3G 0 lvm /
└─graylog--vg-swap_1 (dm-1) 252:1 0 4G 0 lvm [SWAP]
sdb 8:16 0 100G 0 disk
loop0 7:0 0 0 loop
loop1 7:1 0 0 loop
loop2 7:2 0 0 loop
loop3 7:3 0 0 loop
loop4 7:4 0 0 loop
loop5 7:5 0 0 loop
loop6 7:6 0 0 loop
loop7 7:7 0 0 loop
Znači ovdje ovaj sdb od 100Gb "vidim"...