Moja konfa je: P4 1.4 Ghz socket 423 (Willamette)
Abit TH7 - Raid matična ploča
256 Mb RDRAM 400 MHz Rambus
IBM 40 GB HDD 7200 okr / min, 2 Mb cache
Hercules 3D Prophet 4500 64 Mb SDRAM (Kyro 2)
Sony 52 x CD - rom
Napajanje: AC 230 V; 250 W
Windows XP Professional + service pack 1
U Bios - u mi je AGP podešen na 4 x
Imam veliki problem sa igrama -
nijedna igra (osim 2D igara, one rade)
ne radi. Instalirao sam najnovije drivere za Win XP (mislim v 16.055) i opet ništa ne radi. Kada pokrenem igru prvih par sekundi se sve normalno pokrene i onda grafika jednostavno "poludi" - kursora je oko 10 - ak na ekranu i konstantno se slika trza u jednoj te istoj sceni iz igre. Naravno, igra zablokira.
. Ne znam što da radim - na Win 98 nije bilo problema. To je sve bilo sa Direct X - om 8.1 onda sam pokušao i instalirao DX 9.0 i opet isto. Pokrenuo sam dxdiag i dobio ove rezultate:
------------------
System Information
------------------
Time of this report: 12/22/2002, 11:44:22
Machine name: DARIO
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 1 (2600.xpsp1.020828-1920)
Language: English (Regional Setting: Croatian)
System Manufacturer: ABIT
System Model: 6A69SA19
BIOS: BIOS Rev:0.1
Processor: Intel(R) Pentium(R) 4 CPU 1400MHz
Memory: 256MB RAM
Page File: 110MB used, 423MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0 (4.09.0000.0900)
DX Setup Parameters: Not found
DxDiag Version: 5.03.0000.0900 32bit Unicode
------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: The file pmxdisp.dll is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer. DirectDraw test results: All tests were successful. Direct3D 7 test results: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code) Direct3D 8 test results: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code) Direct3D 9 test results: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code)
Sound Tab 1: The file als4000.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer. DirectSound test results: All tests were successful.
Music Tab: DirectMusic test results: All tests were successful.
Input Tab: No problems found.
Network Tab: No problems found. DirectPlay test results: The tests were cancelled before completing.
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: 3D Prophet 4500
Manufacturer: Hercules
Chip type: PowerVR KYRO
DAC type: PowerVR
Device Key: Enum\PCI\VEN_104A&DEV_0010&SUBSYS_00101681&REV_07
Display Memory: 64.0 MB
Current Mode: 1024 x 768 (32 bit) (100Hz)
Monitor: SyncMaster 755DF(X)/705DF(X),MagicSyncMaster CDP17BDF(U)(UP)
Monitor Max Res: 1792,1344
Driver Name: pmxdisp.dll
Driver Version: 6.13.0010.6270 (English)
DDI Version: 8
Driver Attributes: Beta Retail
Driver Date/Size: 9/27/2002 16:34:52, 49376 bytes
WHQL Logo'd: No
WHQL Date Stamp: None
VDD: n/a
Mini VDD: powervr.sys
Mini VDD Date: 9/27/2002 16:34:46, 566496 bytes
Device Identifier: {D7B71EAA-4350-11CF-4F6D-1A20A5C2CB35}
Vendor ID: 0x104A
Device ID: 0x0010
SubSys ID: 0x00101681
Revision ID: 0x0007
Revision ID: 0x0007
Video Accel: ModeH263_A ModeMPEG1_A ModeMPEG2_A ModeMPEG2_C
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: All tests were successful.
D3D7 Test Result: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code)
D3D8 Test Result: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code)
D3D9 Test Result: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code)
Ne znam što nije uredu. :confused:
Molim za pomoć! 