View Single Post
Staro 05.03.2012., 22:08   #20175
murina
Premium
Moj komp
 
murina's Avatar
 
Datum registracije: Jan 2007
Lokacija: St
Postovi: 490
Da, Shermanu osovina nije na kraju nogu, nego je 35mm od kraja. Tek sad sam zbunjen nakon puno guglanja. Model je Breakout kojeg nema na Silinom linku. Negdje sam naletio na podatak da je njemu ATC 532mm na 150mm, što bi značilo da je moj na 130mm Ovako sam izmjerio svojih 150mm

Slijedi mi idućih dana tuning vilice, a situacija je ovakva: U njemu je opruga koja je po manualu Medium za model Breakout+ (170mm), a Firm za model Breakout (150mm).
Na netu sam naletio na ovo:

Citiraj:
...Grease the shi!t out of the spring. Drop the spring back into the left leg and thread the 20mm top cap on. On the 65mm fork, I used a 80mm spring. On the 100mm for, I used a 130mm spring. It was a pain in the ass to get it all the way down. But I did it. Shermans are notoriously undersprung anyways. If you really need to, you can always just lop off a bit of the spring. Remember to measure and think things through before you cut. Make the spring slightly longer than it has to be. The spring is slightly longer than it has to be when it comes with the fork too.
Dakle, meni je vilica pretvrda. Na vožnjama jučer i prekjučer sam iskoristio cca 100mm hoda, a SAG mi je 15mm u kad sam na volanu. Što mislite koliko bih trebao skratiti oprugu?
murina je offline   Reply With Quote