Citiraj:
Autor maxy440
ma strpljen u kurcu 
to bi bilo lako da ja neam lap... na njima je taj pass u eeprom chipu... i da nema neki program tu trazim po forumima uzbekistana i ništa..... |
ajd sam upalim govno od lapa pa bacim oko kak se zove program
edit
u biosu imam opciju HP spare key i ima opcija HP protect tools /to se sve vrti oko bios pass-a/ procitaj i prouci programe.
inace sta ce ti bios ? ako ces mjenjat boot order to mozes i sa F9 ako je nesto drugo, sta da ti kazem osim BORI SE i nadji papiric
ps. spare key moras postavit , znaci i ako si ti postavio zaboravio si ili si izgubio papir
evo iz manuala
Code:
Unknown user password
If the computer you are servicing has an unknown user password, follow these steps to clear the
password:
NOTE:
These steps also clear CMOS.
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 40).
5. Remove the real-time clock (RTC) battery (see RTC battery on page 66).
6. Wait approximately 5 minutes.
7. Replace the RTC battery and reassemble the computer.
8. Connect AC power to the computer. Do not reinsert any batteries at this time.
9. Turn on the computer.
All passwords and all CMOS settings have been cleared.