Za podesiti Thompsona da mu je port 3 WAN i da se on spaja na drugi ruter preko porta 3 (pppoe) trebas uci u ruter preko telneta zatim upiši slijedece redom:
Code:
:env set var=SESSIONTIMEOUT value=0
:ppp relay flush
:ppp flush
:eth flush
:atm flush
:atm phonebook flush
:saveall
:eth bridge ifdelete intf=ethport3
:eth ifadd intf=eth_wan
:eth ifconfig intf=eth_wan dest=ethif3
:eth ifattach intf=eth_wan
:ip ifadd intf=ip_wan_eth dest=eth_wan
:ip ifconfig intf=ip_wan_eth status=up
:ip ifattach intf=ip_wan_eth
:nat ifconfig intf=ip_wan_eth translation=enabled
:dhcp client ifadd intf=ip_wan_eth
:dhcp client ifconfig intf=ip_wan_eth metric=5 dnsmetric=5
:dhcp client rqoptions add intf=ip_wan_eth option=dhcp-lease-time
:dhcp client rqoptions add intf=ip_wan_eth option=dhcp-renewal-time
:dhcp client rqoptions add intf=ip_wan_eth option=dhcp-rebinding-time
:dhcp client rqoptions add intf=ip_wan_eth option=subnet-mask
:dhcp client rqoptions add intf=ip_wan_eth option=classless-static-routes
:dhcp client rqoptions add intf=ip_wan_eth option=default-routers
:dhcp client rqoptions add intf=ip_wan_eth option=classfull-static-routes
:dhcp client rqoptions add intf=ip_wan_eth option=domain-name-servers
:dhcp client ifattach intf=ip_wan_eth
:atm phonebook add name=pvc_data addr=0*86
:atm ifadd intf=atm_data
:atm ifconfig intf=atm_data dest=pvc_data encaps=llc ulp=mac
:atm ifattach intf=atm_data
:eth ifadd intf=eth_data
:eth ifconfig intf=eth_data dest=eth_wan
:ppp ifadd intf=pppoe_data
:ppp ifconfig intf=pppoe_data dest=eth_wan user=username@carnet password=lozinka
:ppp rtadd dst=0.0.0.0 dstmsk=0.0.0.0 intf=pppoe_data
:ppp ifattach intf=pppoe_data
:nat ifconfig intf=pppoe_data translation=enabled
:eth bridge config vlan=enabled filter=none
:eth vlan add name=public vid=9
:saveall
:atm phonebook add name=pvc_data addr=0*86 su VPI i VCI ovisno o ISP-u