[Shaka111]

Well my 9800gx2 required a little bit different type of connecting, the 2 empty pin’s are both minus type, so I made some modification and now it’s working
For this to make it work you need: 2 cables as mentioned above by Goldfries.
1.Connect pcie connector so it fits nicely, now you have 2 empty pin’s left.

2. Take the 1st cable put it in the 1st empty pin from above and push it into the 1st pcie empty pin connector (which you already connected) so it touches the source of electricity.(1st line , 1st pin)

3. Take the 2nd cable put it in the last empty pin and push it into the pcie connector (1st line , 2nd pin)

Don’t forget to put some electricity insulate glue around the both wires, just in case if they touch each other, your graphic card won’t blow up.

Hope it works, mine works if wanted I can make it with pictures

It’s better to use the 6pin adapter which comes with graphic card, As you don’t wan’t to mess the power supply

za 9800Gx2 je valjda malo drugacije po ovome...