AMLI: ACPI BIOS is attempting to read from an illegal IO port address (0x71), which lies in the 0x70 - 0x71 protected address range. This could lead to system instability. Please contact your system vendor for technical assistance.
The DHCP allocator has disabled itself on IP address 10.10.5.248, since the IP address is outside the 192.168.0.0/255.255.255.0 scope from which addresses are being allocated to DHCP clients. To enable the DHCP allocator on this IP address, please change the scope to include the IP address, or change the IP address to fall within the scope.
To dvoje je od danas dosta se ponavljaju u Event Viewer-u
EDIT:
Advanced configuration power interface. It controls standby functions etc.
May i suggest a check of the bios power settings, turn control off there and let XP handle it.
A bios upgrade may cure it, but in view of the dangers involved, not recommended.
Probao sam iskljucit ACPI .ali nece onda da pocne ocitavat windowse...
Znaci jedini ljek je da probam unaprijedit Bios...ali to bas nije preporucljivo..
EDIT:
Evo jos nesto ovo su podatci od maticne pise da max procesor moze do 1.2GHZ, a ja imam 1.3Ghz dali mozda i to zeza...
SOCKET-A 200MHZ FSB
FOR DURON (SPITFIRE) & ATHLON(THUNDERBIRD)
UP TO 1.2GHZ
VIA VT8731 KT-133
VIA VT82C686A (OPTIONAL 686B FOR ATA-100)
3 x DIMM 168-PIN
3.3V SDRAM
1 x ISA
5 x PCI
1 x AGP
ATX Power connector
19CM x 30.5CM
IDE : ULTRA DMA ATA-66 (ATA-100 OPTIONAL)
2S : 2 x 16C550 UARTS
1P : 1 x SPP/EPP/ECP
2 x USB
2 MINI-DIN PS2 MOUSE & K/B
SOUND + JOYSTICK (OPTIONAL)
AC-97 SOUND (OPTIONAL)
A.M.R SLOT (OPTIONAL)
2X/4X AGP PORT
EDIT:
--- ENGLISH ---
In this page i post the solution of the so-called k7vat freeze problem . A serious bug that affects the Lucky Star K7VAT motherboard that sometimes “ freezes “ when using it under Windows XP (but it can also freeze on other operative systems) . All that you have to do is to download the “ vlatency patch “ down and execute it. Nothing More.
Evo nasao sam taj neki patch skinio ga instalirao pa cemo vidjeti...
EDIT:
Opet mi se smrznio ovo ga muci valjda??????
The DHCP allocator has disabled itself on IP address 10.10.5.248, since the IP address is outside the 192.168.0.0/255.255.255.0 scope from which addresses are being allocated to DHCP clients. To enable the DHCP allocator on this IP address, please change the scope to include the IP address, or change the IP address to fall within the scope.