Mali update:
I have done a quick fix update to the drivers related to the installation. If you where getting the message that "your card is not supported..." in the original release, download the drivers again, the error should not show up and the drivers will install correctly this time. Only the mirrors with the "updated" tag have the new set, get the drivers from them.
http://www.omegadrivers.net/
Ima barem deset mirrora...
Dakle-skidati samo onu verziju označenu sa "updated".
Ima super-zanimljivih stvari
Enabled Geometry Instancing in supported cards (R300 and up)-u zadnjoj službenoj ATI-jevoj verziji je to bilo uključeno, u beti nije.
WMV acceleration-do sad nije radilo ni u jednoj verziji drivera, navodno je problem rješen.
Laptop video playback problem-nije bilo rješeno zadnjih dvije-tri verzije...itd
I još par stvari koje dosta mulaca ne čita po defaultu pa se poslije žale
Important Notes:
1. Well, at last, the fix for the dreaded overlay video bug has been found. The cause IS NOT
the ATI drivers or any of my settings, the cause is a hardware bug, more specifically a
BIOS bug. In the testing, two people already updated their Sager notebooks with a new BIOS
provided by Sager and the video problem is GONE! So I encourage you to go to your
manufacturer's web page and see if a new bios update has been issued for your laptop, and
if not, e-mail the manufacturer so they can rush out a fix for this.
2. CCC will work with the Omega Drivers, but is NOT recommended that you install it, all
the functions found in CCC are already included with RadLinker Omega Edition or will
be included in a near future as this new CP project develops.
3. Now the Omega Drivers will use a built-in, special RadLinker version ("Advaced 3D" tab)
with the following features:
> Uses NO resources.
> Doesn't require .NET to work.
> New settings for both D3D and OGL.
> Golbal controls to set both D3D and OGL in one pass.
> Automatic Per-application profiles.
> Integrated Overclocking.
> Desktop and Game Color/Gamma control.
> Game Color/Gamma control for profiles.
> Temporal AA settings (T2 & T3) and Temporal AA Threshold control.
> Trilinear filtering can be forced for Anisotropic filtering.
> Catalyst AI support.
This new CP was made in conjunction with ChrisW, maker of Radlinker, as an exclusive
feature for the Omega Drivers and we will keep adding features in future releases.
4. Since RadLinker is now a vital part of the Omega Drivers, it will not be an option
to select during setup anymore, it will now automatically look for and uninstall ANY
previous version and replace it with the new one.
5. Since the menu changed, all of the commands in the CP that control AA/AF/VSync/etc. will
NOT work with the Special CS driver. The reason is that the file used for CS is an old
OGL file and the new CP uses NEW registry keys to control the D3D and OGL settings, but
in order to control them, the driver needs to recognize these commands. The default
internal setting for the Special OGL file is all High Quality, no AA/AF/VSync.