To PortForward function worked first need to set a fixed network settings on the network card through which you are connected to the modem. To do this open the TCP / IP network card properties and select the "Use the following IP address" and set:
- IP=192.168.100.2
- Subnet=255.255.255.0
- Gateway=192.168.100.1
On that device set PortForward functions under the Advanced menu (click on Advanced).
If you can not open the page (disabled by ISP), try the following procedure:
- switch off modem
- disconnect cable from cable network (coaxial input)
- switch on modem and now try access PortForward settings in web config
- upon entry required (do not forget Applay button at the bottom of the page)
- turned off the modem and reconnect cable from cable network (coaxial input)
- switch on modem
On
this page you have an example of how to configure, eMule for example, you select / change for which application you need.