[dotanewbgoespro]

Ma nije u kućištu problem. Izvuko sam sve van da provjerim što to buči, da na
kraju ne ispadne da je kvalitetni procesor.

Sobna temperatura je 25°C, a grafička vrti ventilator na bolesnoj brzini od
samog paljenja računala pa sve do ulaska u windowse ali i nakon idle-anja
unutar istog.

Ovdje kod buraza nemam mikrofon ni kameru da vam snimim i pokažem ali,
stvarno se čuje >_<..

EDIT: Isto tako ATI Tray Tools kaže: no supported hardware found
kada odem pod overclocking settings > fan, što sada može značiti da
ni windowsi ne mogu vidjeti fan da bi regulirali ventilator?

EDIT: DX diag varti ove rezultate za Display:

---------------
Display Devices
---------------
        Card name: AMD 760G
     Manufacturer: ATI Technologies Inc.
        Chip type: ATI display adapter (0x9616)
         DAC type: Internal DAC(400MHz)
       Device Key: Enum\PCI\VEN_1002&DEV_9616&SUBSYS_96161849&REV_00
   Display Memory: 700.0 MB
     Current Mode: 1920 x 1200 (32 bit) (60Hz)
          Monitor: Plug and Play Monitor
  Monitor Max Res: 1600,1200
      Driver Name: ati2dvag.dll
   Driver Version: 6.14.0010.6947 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
 Driver Date/Size: 4/29/2009 04:17:04, 335872 bytes
      WHQL Logo'd: n/a
  WHQL Date Stamp: n/a
              VDD: n/a
         Mini VDD: ati2mtag.sys
    Mini VDD Date: 4/29/2009 05:30:44, 3643904 bytes
Device Identifier: {D7B71EE2-D556-11CF-DA60-1CB6A1C2CB35}
        Vendor ID: 0x1002
        Device ID: 0x9616
        SubSys ID: 0x96161849
      Revision ID: 0x0000
      Revision ID: 0x0000
      Video Accel: ModeMPEG2_C ModeMPEG2_D 
 Deinterlace Caps: {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch 
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch 
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch 
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
DDraw Test Result: Not run
 D3D7 Test Result: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code)
 D3D8 Test Result: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code)
 D3D9 Test Result: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code)

Ovi fail-ovi su određeni sa moje strane zato jer se kocka vrti prebolesno brzo i niš ne vidim :'x.
I meni je sada ovo sve čudno jer mi se čini da driveri nisu instalirani.