Evo da se nepravimo pametni jedan mali nekakv tutorijal,na engleskom,pa se nadam da će pomoć
Citiraj:
1. Chek if PnP SW Enumerator is installed on your machine (Device Manager / System devices) - should be listed there!
2. If it is not there then we will probably solve it!
3. Locate "machine.inf" on your OS, copy it somewhere and modify it (find "ExcludeFromSelect=*" and remove the line or simply exclude it from processing by adding a ";" at the beginning)
4. Check the "machine.inf" file for location where SWENUM should be located (mine was reading: SWENUM.CoInstallers.CopyFiles = 11 ; %windir%\System32)
5. Find "swenum.sys" file on your XP installation CD (mine was in DRIVER.CAB) and copy it to the proper location (I am not sure if it is necessary but worked for me)
6. Go to Control Panel /Ad HW and follow the wizard towards manual selection of device to be added
7. Select Add System device
8. Select Have disk
9. Navigate to changed machine.inf
10. from the list select standard deviecs (in the left list) and "Plug and Play Software Enumerator" in the right list
11. Finish the installation
If it stil does not work reinstall the audio adapters' drivers. It should work now. If it does not, I can't help.
I am writing these instruction so much in details as I only found very basic instruction on the web and only after trying around different ways got the result!
|