Mod ide ovako:
Code:
The mod is fairly simple, place the board like this:
PCI-Slots down and CPU socket up.
Locate the 3 big condensators between the PSU-connector and the CPU-socket.
If you look at the top condensator of the 3, a little bit to the right is an SMD-mounted
condensator called C37.
Remove this C37 and your board is ready to support the XP-2200+ .
You do lose warranty and it's totaly on your own risk!
Plus još moraš flešat bios...
Pošaljem ti ga na mail ako hoćeš.