ABIT NF7-S beep codes
One Beep - board is working fine
one long beep then machine shuts down - faulty, improperly installed or missing CPU
1 short beep - System is booting normally
2 short beeps - CMOS setting error
1long-1short - DRAM error
1long-2short - Display card or monitor connected error
1long-3short - Keybaoard error
1long-9short - ROM error
Long continuous beep - DRAM isn't inserted corerectly
Short continuous beep - PSU problem
A teo tone siren ( zvuči ko hitna) generally caused by overheating or out of spec. voltages.
Evo to su ti svi kodovi pištajuče ploče