Citiraj:
Autor MP950
McG ja znam da si ti korektan čovjek i ne podliježeš marketinškim trikovima, i sve je to lijepo, ali ako sam ja kupio ovakav hardver, iskeširao ovolku paru, razumno je da želim provesti neko vrijeme zabavljajući se sa overclockanjem i njegovim rezultatima, to mene zabavlja i ne mogu si pomoći.
|
Meni je svejedno kaj ti delaš s tim, ja ti samo velim da od gledanja u 3DMark nemaš koristi niti budeš s tim kaj postigel.
Za probleme s
driverima i za pravilnu instalaciju kartica baci pogled po netu i imaš rješenja sličnih ovome:
Citiraj:
How to Not Have Issues- Uninstall old drivers first
- Reboot and let windows install a standard VGA adapter (or cancel if prompted for drivers)
- Power down and install the second (or additional two or three) cards
- Boot and let windows finish finding new hardware
- Reboot and let windows finish finding new hardware (if it needs to)
- Install Catalyst 8.3 or higher
How to Fix It- Start up with only one card in the system
- Uninstall ATI drivers through the control panel -> add/remove programs
- Reboot into safe mode (press F8 at boot)
- Open a command window with admin privileges
- Run these commands from a command prompt:
- set devmgr_show_nonpresent_devices=1
- start devmgmt.msc
- Enable show hidden devices
- Uninstall all display adapters listed (present or non-present/hidden - they appear slightly faded); make sure to check the box to remove driver files if possible
- Uninstall any non-present/hidden "PCI standard PCI-to-PCI bridge" devices from system devices. It may also help to uninstall other non-present hardware, but be careful about software and non plug-and-play devices (don't remove them).
- Reboot normally
- Let windows finish finding new hardware
- Power down and plug in all new hardware
- Boot and let windows finish finding new hardware
- Reboot and let windows finish finding new hardware (if it needs to)
- Install Catalyst 8.3 or higher
|
Citiraj:
Autor Razer
 McG šalji sliku pljiiiz 
|
Šaljem...