PC Ekspert Forum

PC Ekspert Forum (https://forum.pcekspert.com/index.php)
-   Hardverski problemi (https://forum.pcekspert.com/forumdisplay.php?f=41)
-   -   Gdje se nalazi u biosima kod mene ova opcija : SATA Native Control? (https://forum.pcekspert.com/showthread.php?t=95542)

Miha-Đakovo 18.01.2008. 22:33
Gdje se nalazi u biosima kod mene ova opcija : SATA Native Control?
 
Kako da je isključim?

Tnx!!

domy_os 19.01.2008. 00:22
Na ploči iz siga/moj komp? Kad uđeš u BIOS, stisni CTRL+F1, uđi u Integrated Peripherals i tu je negdje...

Veki-os 19.01.2008. 00:57
I zašto svi misle da imaju biose??
Na ploči ima samo 1 bios.

domy_os 19.01.2008. 01:08
Na nekima i dva. :)

Veki-os 19.01.2008. 02:09
Citiraj:
Autor domy_os (Post 929839)
Na nekima i dva. :)
Joj što imamo pametne moderatore...
Znam,ali ljudi ne misle na Dual BIOS neko zamišljaju valjda da imaju 10 biosa.

Miha-Đakovo 19.01.2008. 09:25
Citiraj:
Autor domy_os (Post 929808)
Na ploči iz siga/moj komp? Kad uđeš u BIOS, stisni CTRL+F1, uđi u Integrated Peripherals i tu je negdje...
Ma gledao sam i nema te opcije ...

Živcira me što imam SATA diskove a rade mi kao ATA (tako su podešeni). Jel ima to neke velike razlike u brzini protoka podataka?

Baja 001 19.01.2008. 09:45
Citiraj:
Autor Miha-Đakovo (Post 929966)
Ma gledao sam i nema te opcije ...

Živcira me što imam SATA diskove a rade mi kao ATA (tako su podešeni). Jel ima to neke velike razlike u brzini protoka podataka?
Mislim da je to upravo to što tražiš ali nisam 100% siguran, sačekaj još odgovora!

Miha-Đakovo 19.01.2008. 10:03
Citiraj:
Autor domy_os (Post 929808)
Na ploči iz siga/moj komp? Kad uđeš u BIOS, stisni CTRL+F1, uđi u Integrated Peripherals i tu je negdje...
Evo ovo imam pod tom karticom :

Integrated Peripherals
Serial-ATA RAID Config
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Serial-ATA RAID Config
Item Help
Menu Level
􀁠

NV SATA RAID function [Disabled]
x NV SATA 1 Primary RAID Disabled
x NV SATA 1 Secondary RAID Disabled
x NV SATA 2 Primary RAID Disabled
x NV SATA 2 Secondary RAID Disabled
x NV SATA 3 Primary RAID Disabled
x NV SATA 3 Secondary RAID Disabled
􀁋􀁌􀁊􀁉
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F11/12: Profile F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Integrated Peripherals

􀁠
Serial-ATA RAID Config [Press Enter]
On-Chip IDE Channel0 [Enabled]
On-Chip MAC Lan [Auto]
On-Chip MAC1 Lan 1 [Auto]
NV Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]
Onboard Audio Function [Auto]

􀁠
SMART LAN [Press Enter]
Onboard 1394 [Enabled]
Onboard LAN Boot ROM [Disabled]
Onboard SATA/IDE Ctrl Mode 1 [IDE]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]

x ECP Mode Use DMA 3
On-Chip USB [V1.1+V2.0]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Legacy USB Storage detect [Enabled]


Šta ovo znači :

Onboard SATA/IDE Ctrl Mode
RAID Set the onboard SATA controller to RAID mode.
AHCI Set the onboard SATA controller to AHCI mode. Advanced Host Controller
Interface (AHCI) is an interface specification that allows the storage driver to
enable advanced Serial ATA features such as Native Command Queuing and
hot plug. For more details about AHCI, please visit Intel's website.
IDE Set the onboard SATA controller to IDE mode. (Default value)

flajpan 19.01.2008. 12:04
Citiraj:
Autor Miha-Đakovo (Post 929981)
Šta ovo znači :

Onboard SATA/IDE Ctrl Mode
RAID Set the onboard SATA controller to RAID mode.
AHCI Set the onboard SATA controller to AHCI mode. Advanced Host Controller
Interface (AHCI) is an interface specification that allows the storage driver to
enable advanced Serial ATA features such as Native Command Queuing and
hot plug. For more details about AHCI, please visit Intel's website.
IDE Set the onboard SATA controller to IDE mode. (Default value)

To je ono što tražiš - prebaci na ahci i ako imaš xp, kod instalacije trebaš stisnuti F6 i sa diskete instalirati sata drivere kad te to zatraži.

Miha-Đakovo 19.01.2008. 12:27
Citiraj:
Autor flajpan (Post 930077)
To je ono što tražiš - prebaci na ahci i ako imaš xp, kod instalacije trebaš stisnuti F6 i sa diskete instalirati sata drivere kad te to zatraži.
Sranje, nema te opcije kod ploče S4 nego samo kod S5.....:(

Evo ove opcije imam pod Integrated Periperals

Serial-ATA RAID Config [Press Enter]
On-Chip IDE Channel0 [Enabled]
On-Chip MAC Lan [Auto]
On-Chip MAC1 Lan [Auto]
NV Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]
Onboard Audio Function [Auto]

􀁠
SMART LAN [Press Enter]
Onboard 1394 [Enabled]
Onboard LAN Boot ROM [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
On-Chip USB [V1.1+V2.0]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Legacy USB Storage detect [Enabled]

Baja 001 19.01.2008. 14:43
Ovako pogleda sam u sebe.
Prvo CTRL+F1
Onda potrazi SATA PORT 0-1 Native Mode


Sva vremena su GMT +2. Sada je 10:05.

Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 1999-2024 PC Ekspert - Sva prava pridržana ISSN 1334-2940
Ad Management by RedTyger