PC Ekspert Forum

PC Ekspert Forum (https://forum.pcekspert.com/index.php)
-   Mreže (https://forum.pcekspert.com/forumdisplay.php?f=16)
-   -   Konfiguriranje vlan tagiranja na TPLINK-u s DDWRT-om (https://forum.pcekspert.com/showthread.php?t=284483)

spitfire83 02.03.2017. 14:02

Konfiguriranje vlan tagiranja na TPLINK-u s DDWRT-om
 
Uvedena mi je iskon optika. Imam reisecom ONT. Od iskona dobio zyxel vmg
Router je OK, ali ja bi ipak rađe stavia svoj TpLink TL-WDR4300 direktno u ONT.

Koliko sam skuzia i cita po forumu i ostatku interpleta, potrebno je tagirati wan port s vlan tagom 100 i podići pppoe konekciju.


U teoriji sam to i napravio, u praksi ne mogu podići PPPoE. Znam svoj username i password, a postavke u tplinku su ovakve:

http://i.imgur.com/PVBi2xK.jpg
http://i.imgur.com/zahcz6d.jpg

A sama shema na routeru je ovakva:
http://www.dd-wrt.com/wiki/images/th...00-default.png
eth0
the interface on which the switch is connected - is not used as layer 3 interface (has no ip-address). This interface is also used to configure the switch using the swconfig command.
vlan1
the logical interface that represents the LAN - is not used as layer 3 interface (has no ip-address).
vlan2
the logical interface that represents the WAN
br0
the logical interface for the complete LAN. This is the interface has the LAN-IP-Address.
Izvor: http://www.dd-wrt.com/wiki/index.php/TP-Link_TL-WDR4300


Što mi nedostaje, di fulam?

robimarko-bug 02.03.2017. 14:48

Hm,jesi probao s OpenWRT-om ili LEDE-om?
DD-WRT zna biti mušićav

spitfire83 02.03.2017. 14:55

Svi oni znaju biti mušićavi a original fw ne podržava vlan tagging.
Budem probao openwrt večeras.

Sent from my SM-G935F using Tapatalk

robimarko-bug 02.03.2017. 14:59

Bolje probaj LEDE,sve što je OpenWRT zeznio i za čime zaostaje su riješili.
U biti forkali su OpenWRT i dobrano ga nadogradili.

spitfire83 03.03.2017. 00:33

https://uploads.tapatalk-cdn.com/201...0d6dee74d0.jpg
https://uploads.tapatalk-cdn.com/201...b266568dd2.jpg

I dalje ništa

Sent from my SM-G935F using Tapatalk

Edit: saznao da treba biti i eth0 i wan tagani navodno istim id-em. Ni ta kofa ne radi.
Takodjer kad pod physical settings za wan pppoe interface postavim eth0.2.100 ili eth0. 100 ne radi

robimarko-bug 03.03.2017. 07:30

CPU isto moras taggati

Sent from my Redmi Note 3 using Tapatalk

spitfire83 03.03.2017. 08:38

Nije pomoglo, proba san sve konfiguracije koje san naša na netu da ljudima rade.
Ispravna je da tag na Cpu i wan port.
Nije pomoglo

Sent from my SM-G935F using Tapatalk


Sva vremena su GMT +2. Sada je 15:05.

Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 1999-2024 PC Ekspert - Sva prava pridržana ISSN 1334-2940
Ad Management by RedTyger