PC Ekspert Forum - MSI Afterburner

PC Ekspert Forum (https://forum.pcekspert.com/index.php)

- Overclocking (https://forum.pcekspert.com/forumdisplay.php?f=2)

- - MSI Afterburner (https://forum.pcekspert.com/showthread.php?t=161182)

http://www.guru3d.com/article/msi-afterburner-review/

zanimljiv alatic na bazi riva tunera....
:goood:

za sad ništa za moju ne radi najbitnija stvar core voltage ostalo da.

Šta i voltažu može podešavati?

Citiraj:

Autor hammer_of_thor (Post 1445161)

Šta i voltažu može podešavati?

Nije onda za svakome dati u ruke taj tool :D
Lijepo i pregledno mi izgleda, jednostavno sučelje, podsjeća na EVGA precision ali ipak mi se ne da prčkati po tome da se ne bih zanio pa išao voltažu dizati ne daj bože, bilo bi tu svega :eek: EVGA je tool za mene, špansko selo :goood:

Citiraj:

Autor Doink the Clown (Post 1445169)

Nije onda za svakome dati u ruke taj tool :D

Brijem da će GPU na GTX275 letjeti na 800 MHz sad :D :D

Spuštanjem shadera je poletio na pomalo impresivnih 750 MHz, šta će tek biti kad joj dam još malo soka :D
Samo da opet osposobim i7 :)

Citiraj:

Autor Doink the Clown (Post 1445169)

ali ipak mi se ne da prčkati po tome da se ne bih zanio pa išao voltažu dizati ne daj bože, bilo bi tu svega

Pa nečeš roštiljati grafu na neznam kakvim voltažama.
Nađeš prvo po netu koje su sigurne voltaže

Citiraj:

Autor Doink the Clown (Post 1445169)

možeš dizati voltažu na svojoj xfx gtx 260??je bitna verzija drivera ja imam 182.50??

Citiraj:

Autor demetrius (Post 1445146)

za sad ništa za moju ne radi najbitnija stvar core voltage ostalo da.

Nazalost ni meni neradi :S

Citiraj:

Autor demetrius (Post 1445173)

možeš dizati voltažu na svojoj xfx gtx 260??je bitna verzija drivera ja imam 182.50??

Pa s ovim MSI toolom očito se može (ne znam zašto tebi ne radi ali možda je i bolje za zdravlje grafe da ne radi :)) ali kako rekoh, nije to za mene pošto nemam mjere u tim stvarima i skurio bih grafu za čas kada bih se igrao s tim voltage barom. Zato... bolje da se držim EVGE i ne dolazim u napast instalacijom ovog đavla :D

The first version supports voltage control for:

- Reference design AMD RADEON 5850 with VT1165 voltage regulator
- Reference design AMD RADEON 5870 with VT1165 voltage regulator
- Reference design AMD RADEON 4870 with VT1165 voltage regulator
- Reference design AMD RADEON 4870 X2 with VT1165 voltage regulator
- Reference design AMD RADEON 4890 with VT1165 voltage regulator
- Reference design NVIDIA GeForce GTX260 with VT1165 voltage regulator (65nm models only)
- Reference design NVIDIA GeForce GTX280 with VT1165 voltage regulator
- Reference design NVIDIA GeForce GTX295 with VT1165 voltage regulator (dual PCB models only)
- Custom design MSI N260GTX Lightning with uP6208 voltage regulator
- Custom design MSI N275GTX Lightning with uP6208 voltage regulator

It is CRITICALLY important to add that voltage control REQUIRES reference design PCB and ORIGINAL reference BIOS. Voltage control on some factory overvolted of manually voltmodded display adapters (e.g. if voltage table altered with BIOS editor) may not work

tako da znam da je moja valjda na listi a ne radi,novim verzijama ćemo valjda doć an red.

Vrlo korisna informacija. hvala:D

ja na svojoj 4870 ne mogu dizat voltažu...

Citiraj:

Autor DomagojX (Post 1445192)

ja na svojoj 4870 ne mogu dizat voltažu...

ocito onda nemas onaj gore regulator navedeni... a i ako si moddao bios...

bios je original...budem probal na xpu eventualno još..trenutno sam na win7

proradio corevoltage stavio zadnje drivere 190.56,ja sam na xp x64,max voltažu koja mogu stavit je 1,350.

Citiraj:

Autor demetrius (Post 1445875)

proradio corevoltage stavio zadnje drivere 190.56,ja sam na xp x64,max voltažu koja mogu stavit je 1,350.

A koja je default?

Citiraj:

Autor hammer_of_thor (Post 1445906)

A koja je default?

po msi afteru 1.049

http://img203.imageshack.us/img203/5989/msi.th.jpg

ufffff, znači možeš ju spalit sad-pa-sad :D

treba temp pratit kad budem voltažu dizao.

evo ja sam se baš probao s tim malo igrat...em ne mogu voltažu dizat...i em ne mogu dizat više od 790/1100...dakle isti shit kao i ccc

Citiraj:

Autor DomagojX (Post 1446702)

evo ja sam se baš probao s tim malo igrat...em ne mogu voltažu dizat...i em ne mogu dizat više od 790/1100...dakle isti shit kao i ccc

Citiraj:

Autor demetrius (Post 1445180)

It is CRITICALLY important to add that voltage control REQUIRES reference design PCB and ORIGINAL reference BIOS.

Tvoja XFX HD4870 nema referentni dizajn PCB-a ;)

btw probao tool... nije niš posebno, iskreno više mi se sviđa Precision jer ako niš drugo troši manje resursa. Ovaj shit pojede 20MB memorije dok za usporedbu Precision pojede cca 2MB

jos jedan + prema precisionu :beer:

ja se igro voltažama,neka čudna događanja,nešto malo veći takt sam uspio dobit,recimo na taktu od 740 dobijem manji score nego na 725 ko da fali još napona,meni se čini čim 3d mark krene da mi spusti voltažu,treba još testirat.

Jedino što fali je opcija za praćenje temperature u hardware monitoru.

Citiraj:

Autor Wolverine (Post 1448334)

Ovaj shit pojede 20MB memorije dok za usporedbu Precision pojede cca 2MB

kao na tvojih 8 GB je vazno jel trosi 2 ili 20 mb? mislim da je to u vrijeme kad ljudi imaju preko 2/4GB memorije najmanji problem...

Citiraj:

Autor alengrosevic (Post 1449741)

kao na tvojih 8 GB je vazno jel trosi 2 ili 20 mb? mislim da je to u vrijeme kad ljudi imaju preko 2/4GB memorije najmanji problem...

Nije važno ako se radi o 24/7 setupu... Kad je u pitanju benchanje, onda već dobiva neku važnost. Ne on sam no ukoliko imamo tako 3-4 programa koja su alternativa i svaki od njih troši po 20MB više od postojećeg, nije ti svejedno hoćeš li imat 8MB zauzeća ili 80MB ;)

No to su sve finese... Za 24/7 svakako nećeš gledat na to. Ali uzmi u obzir da je Wolv to rekao u smislu: "Šta će mi ovaj thingi kad imam drugi thingi koji isto radi a manje mi memorije jede"

kopija precision-a, dodatni settingsi su identicni ko na precisionu, s tim da evga nudi g15 support za monitoring, a ovo ne

sto se tice voltaze, evga voltage tuner i vozi :)
imam stariju krekanu verziju koja radi na mojoj bfg 260ki, korisno za malo veci oc, al samo benchmark, ne 24/7 setup

btw. evga je izbacila novu verziju precisiona 1.8.1
http://www.evga.com/forums/tm.asp?m=...ey=&#100951332

Oboje su "kopija" Riva Tunera, tako da je glupo reći da je Afterburner kopija Precisiona...

Citiraj:

Autor alengrosevic (Post 1449741)

kao na tvojih 8 GB je vazno jel trosi 2 ili 20 mb? mislim da je to u vrijeme kad ljudi imaju preko 2/4GB memorije najmanji problem...

Konkretno... zaboli me koliko memorije koristi pa taman da protera i 2GB ;)

No ako već postoji slična aplikacija koja je optimiziranija čemu da koristim ovu.
Ajd da koristi dva puta više ali 10 (deset) puta više od već postojeće slične je već pretjerano da ne kažem bezobrazno. Neka se potrude i ispeglaju kod.

Citiraj:

Autor Razer (Post 1449783)

Oboje su "kopija" Riva Tunera, tako da je glupo reći da je Afterburner kopija Precisiona...

je, baza im je ista, al riva tuner ne lici ni jednome od ta 2, dok ovo izgleda ko precision s drugim razmjestajem i ne znam cemu toliko velikim suceljem

Citiraj:

Autor Bipe (Post 1449775)

sto se tice voltaze, evga voltage tuner i vozi :)
imam stariju krekanu verziju koja radi na mojoj bfg 260ki, korisno za malo veci oc, al samo benchmark, ne 24/7 setup

sad skinuo sa guru3d zadnju verziju,samo trebat patch stavit da bi radio na ne evga karticama,2V max voltaža.

Patch, kojeg nema još od prve verzije EVGA-inog Voltage Tunera...tako da ti to pada u vodu.

ne pratim te??što želiš reć,da ako podiežm voltažu uvjek će vraćat na početnu s tim patchom??

Afterburner v.1.4.0 (2009-11-11)

Citiraj:

Version History
Afterburner v.1.4.0 (2009-11-11)

Added initial AMD RADEON HD 5970 series graphics cards support

Added voltage control for cost down reference design AMD RADEON HD 4870 series graphics cards with L6788A voltage regulators

Added voltage control for custom design MSI R4770 Cyclone graphics cards series with uP6204 voltage regulators

Ineffective and slow temperature, clock, GPU usage and fan speed monitoring implementation provided by native AMD's ADL SDK has been replaced with own more effective low-level codepath. Due to new codepath hardware monitoring related CPU performance hit has been reduced drastically on the systems with AMD graphics cards and drivers.

On-Screen Display and Logitech LCD monitoring modules no longer explicitly read displayed data from hardware and retrieve cached data from monitoring graphs instead. Due to this change CPU performance hit is reduced when OSD or LCD monitoring features are enabled.

Fan speed slider position and numeric fan speed input field are now being refreshed in automatic fan speed mode only when MSI Afterburner window is active.

Added configuration file switch allowing power users to unlock unofficial overclocking codepath in AMD display drivers (similar to AMDGPUClockTool, ATITool and RivaTuner overclocking implementation on AMD graphics cards).
Unlike AMD's official ADL SDK overclocking ways, unofficial ones are not limited with CCC clock limit but have some alternate disadvantages (e.g. PowerPlay support limitation).
Please take a note that unofficial overclocking methods are not supported either by AMD or by MSI, so unlock and use it at your own risk.

Now it is possible to toggle performance profiler status info visibility in hardware monitor window via [Show status] option in the context menu.

Fixed L6788A database entry for AMD RADEON HD 4770 series graphics cards
GPU voltage monitoring feature is now locked and not available by default.
Unfortunately some inexperienced users don't understand the risk of running multiple tools accessing voltage regulator at the same time and tend to use helper voltage monitoring features in everyday hardware monitoring sessions in conjunction with third party VRM monitoring tools, intensively writing data to VRM and periodically causing it to enter wrong state due to write collision. Unfortunately such issues are wrongly treated by certain users as instability of our product. To prevent such rumors, since this version voltage monitoring feature is no longer available to beginners by default.

Experienced users understanding these specifics and accepting these risks may unlock voltage monitoring features via new safety option in [General]tab
AMD RV8xx I2C microcontroller is now being forcibly reset prior to starting new I2C transaction to minimize the risk of I2C collisions with third party tool without I2C synchronization protocol support (e.g. AMDGPUClockTool)
Added safety option allowing users to disable voltage control feature if it is not needed

Now Afterburner forcibly changes memory clock for all performance levels at once on AMD graphics cards with equal default memory clocks defined for all performance levels to bypass flickering issue caused by incorrect PowerPlay dynamic memory clock changing implementation on some cards

Added Catalyst driver family version detection for AMD graphics cards

Added option to display system time in the On-Screen Display

Added red and blue editions of default skin

Various minor user interface and skin tweaks

Added configuration file switches allowing power users to tweak Afterburner startup process and define startup delay or force the startup to be handled by Windows Vista / Windows 7 Task Scheduler to bypass UAC evaluation window (additional Microsoft Visual C++ 2008 runtime libraries installation is required for task scheduler based startup way)

MSI On-Screen Display server has been upgraded to version 3.6.0. New server provides improved desktop windows notification mechanism and also features optional power user oriented task scheduler based startup way

Added skin format reference documentation. Now third party skin designers may use this local offline documentation to create their own skins for MSI Afterburner. Official MSI Afterburner skin creation contest is approaching!
Do you feel that you can design nice skins for MSI Afterburner? Stay tuned and don't miss your chance to win the prize!

http://event.msi.com/vga/afterburner/download.htm

Afterburner v.1.4.1

Citiraj:

Fix incorrect database entry of MSI N240GT D3 series

http://downloads.guru3d.com/MSI-Afte...load-2410.html

Jel postoji kakva caka da se na 4850 da podizati voltaža sa afterburnerom?

MSI Afterburner 1.5.0 Final Released

Citiraj:

MSI is happy to release Afterburner 1.5.0. Staring from revision 1.4.0, we add TONS of features. There is NO doubt that Afterburner is most powerful graphics card utility from any AIB manufacturer. Below is some key feature highlights and changes:

* More over-voltage support: We add more and more SKU supporting over-voltage function. In our plan, MSI N240 and R5570 series above will support this exclusive function. You want higher performance, buy MSI!
* Kombustor: We add a standalone benchmark tool "Kombustor" as part of Afterburner. Now you can overclock, monitor and benchmark is one tool!

Citiraj:

Changelog

* Added video memory usage monitoring for NVIDIA graphics cards under Forceware 185.xx and newer drivers
* Added GPU usage monitoring for NVIDIA GT2xx and newer graphics cards under Forceware 185.xx and newer drivers
* Added VGA BIOS version detection for AMD graphics cards
* Added optional ability to display hint messages in hardware monitoring window area. The messages notify the user about runtime profile management activity (such as profile creation, removal or applying) and other application events
* Minor appearance tweaks in default skins
* Added compact versions of default skins (default green, red and blue editions)
* Now advanced MSI Afterburner properties also support floating tooltip based context help system similar to the main application window
* Now MSI Afterburner supports RivaTuner's user extendable localization system. Currently localization system includes default English, Russian, Traditional Chinese, Spanish, Italian and Dutch language packs and affects context help system and non-skinned advanced properties interface. Similar to RivaTuner you can also create your own language packs for your native language and share your work with MSI Afterburner users community!
* Improved skin format. Now skinned fonts support characters remapping feature. All skins supplied with MSI Afterburner are using this feature, third party skin designers may decompile and peek into these skins to see an example of new feature usage
* Now hardware monitoring window font size can be redefined via the skin, third party skin designers may decompile and peek into compact versions of default skins to see an example of new feature usage
* Skin format reference documentation has been updated to v1.1 to reflect the format improvements mentioned above
* Added shared memory interface allowing any third party applications to access MSI Afterburner hardware monitoring statistics. The interface is intended for future MSI Afterburner Vista / Windows 7 sidebar gadgets, however, the shared memory layout is publicly open so third party developers can use it to access MSI Afterburner hardware monitoring statistics from their own applications. The SDK included in MSI Afterburner distributive contains open source sample demonstrating the access to shared memory from a third party application
* Added command line switches for forcing MSI Afterburner to be minimized to the system tray area on startup or during runtime and for opening desired advanced MSI Afterburner properties tab. The switches are intended for interraction with future MSI Afterburner Vista / Windows 7 sidebar gadgets. Sample code included in the SDK also shows you how to detect, start and minimize installed MSI Afterburner, how to open desired tab in advanced properties and how to use MSI Afterburner profiles from third party applications
* Reduced runtime skin engine memory footprint due to dynamic skin storage unloading
* Startup settings are now displayed next to the button
* Added button for locking profiles modification
* Now voltage control is also locked by default in safety options in advanced MSI Afterburner properties
* Added AccessibilityCheckingPeriod configuration file switch for improving the compatibility with AMD ULPS power saving technology on Crossfire systems. The switch allows low-level monitoring module to use AMD driver API to check GPU accessibility and detect and display GPU sleep state properly. Please take a note that AMD API implementation is ineffective and hardly suits to realtime monitoring due to high CPU stress resulting in periodic stuttering in games. That is why the compatibility switch is disabled by default, enable it only if you absolutely need to see slave GPU sleep state on the graphs and accept side effects like performance drop and stuttering resulting from ineffective AMD API implementation
* Added NVIDIA GT240M PCI DeviceID range to the core to provide more efficient hardware monitoring via low-level core on mobile NVIDIA GT240 based systems (bonus feature, official mobile systems support is still not declared)
* Graph limits are now adjustable in the graph properties in tab
* Added AMD RV810 graphics processors family supports
* Added voltage control for custom design MSI R5670 1GB series graphics cards with uP6262 voltage regulators
* Added voltage control for custom design MSI R5870 Lightning series graphics cards with uP6266 voltage regulators
* Added voltage control for custom design MSI R5870 Twin Frozr II series graphics cards with uP6266 voltage regulators
* Added voltage control for custom design MSI R5850 Twin Frozr II series graphics cards with uP6266 voltage regulators
* Added integration with external MSI Kombustor stability testing application
* Added workaround for overclocking bug of ForceWare 196.21. Please take a note that the workaround is applied only to 196.00 - 196.21 driver versions range in order to ensure compatibility with future fixed NVIDIA drivers.
* Now hardware database includes marketing names of MSI graphics cards so MSI Afterburner displays marketing names instead of generic graphics card model names when possible

Download

Izvor:guru3d

MSI Afterburner v1.5.1

Citiraj:

*Added voltage control of MSI R5830 Twin Frozr II series.
*Added voltage control of MSI R5670-PD1G series.
*Fixed voltage control of MSI R5870 Lightning and R5870/R5850 Twin Frozr II
*Fixed description of R5670 1GB series

Download

Afterburner 1.6.0 Beta 1 + Kombustor 1.02

Citiraj:

[Changelog] Afterburner 1.6.0 Beta 1
- Added initial NVIDIA GeForce GTX 400 series graphics cards support
- Added basic screen capture support by means of built-in screen capture engine of MSI On-Screen Display server. Now it is possible to assign the hotkey for capturing screenshots in BMP, PNG or JPG formats in DirectX applications and in BMP format on desktop or in OpenGL applications
- Added hardware monitoring history logging support. Now MSI Afterburner is able to save history in native RivaTuner Hardware Monitoring Log file format. The log files captured with MSI Afterburner can be viewed in any text editor like Notepad or in graphics form in RivaTuner's HML file viewer (RivaTuner must be installed for viewing log files in graphics form)
- Added new safety option allowing forcring constant voltage on some cards with voltage regulators supporting programmable dynamic voltage management (e.g. VT1165 or uP6266). New safety option may improve stability on some systems as well as provide power state independent voltage control on the systems with non-standard voltage control implementation
- MSI On-Screen Display server has been upgraded to version 3.7.0. New server gives you a lot of improvements including:
- Stealth mode automatic disabling feature. Now the server is able to disable
stealth mode automatically if incompatible application like FRAPS is active.
You no longer need to disable stealth mode manually if you need to run the
server simultaneously with FRAPS, but keep in mind that stealth technologies will not be active in this case
- DirectX11 On-Screen Display and screen capture support
- Screen capture support for DirectX10 and DirectX11 applications using
multisampled antialiasing or non-standard frame buffer formats (e.g. sRGB)
- Optional On-Screen Display 3D rendering mode. New mode uses 3D accelerated DirectX functions to emulate previously used 2D framebuffer access function and render 2D text. New rendering mode provides On-Screen Display support in DirectX10 and DirectX11 applications using multisampled antialiasing and can also drastically reduce OSD related performance hit on the systems with badly optimized 2D acceleration in display drivers
- Now screenshot file extension is forcibly set to BMP if JPG or PNG screen capture is requested on desktop or in OpenGL application
- Simplified On-Screen Display coordinate space settings. Rarely used desktop and window coordinate space modes have been merged into single framebuffer coordinate space mode
- Now the server automatically selects framebuffer coordinate space instead
of viewport coordinate space when viewport is not accessible (e.g. if pure Direct3D8 device is in use)
- Improved application notification scheme during runtime profiles adjustment. Now runtime changes in OSD application profiles (e.g. OSD zoom ratio change on the fly) are reflected in affedted application almost immedaitely instead of approximately 1 second delay in the previos versions
- Reduced runtime skin engine memory footprint due to dynamic skin storage
unloading
- Updated profiles list
- Now MSI Afterburner distributive includes original 128x128 PNG application
logo (stored in .\Graphics folder) for dockbar applications like RocketDock
or ObjectDock
- It is no longer necessary to close the application to save monitoring window
attachment state
- Added Ukrainian localization

A few important notes on initial GTX 400 series support:

- It is no longer possible to adjust core and shader clocks independently on GTX 400 series. Shader clock is the primary and the only controlable GPU clock for this NVIDIA GPU architecture, the rest parts of core are clocked @ half of shader clock (1/2 ratio is hardwired). So you will have only shader clock slider unlocked on GF100 GPUs, core clock slider is no longer available on these cards. That is by design and must be so.
- It is no longet possible to downclock memory for 3D mode. So the minimum limit for memory clock matches with default 3D clock. It is also by design and must be so.
- Currently available public GF100 drivers have open issue with fixed fan control mode on GTX 400 series: once you enable fixed fan control mode, it is impossible to switch fan control back to default automatic fan speed mode. Reboot is required to restore automatic fan control mode. NVIDA are aware about issue and the fix is already available in new drivers (not available to public yet). So keep it in mind and in meanwhile don't forget to reboot the system to resotre automatic fan control mode if you play with fixed fan control mode in any tool. Alternately, just enable Afterburner's software automatic fan speed mode. It will do the job instead of NV driver until the fix is available.
- Voltage control for GTX 400 series in not implemented yet.

[Changelog] Kombustor 1.02
! Change: Xtreme burning mode displays a warning message (high power draw can cause instability).
! Change: GPU indices inversion to match Afterburner indices.
* Bugfix: in OpenGL 3 rendering, the instructions for use were wrong
* Bugfix: in clocks display (core, memory and shader) for NVIDIA boards.

http://event.msi.com/vga/afterburner...up160Beta1.rar