Catalyst 8.11
 

New Features
This section provides information on new features found in this release of the
Radeon™ Display Driver. These include the following:
• ATI CrossFireX™ Enhancements
• HydraVision Support for Windows XP
• New Display Enhancements
• Performance Improvements
ATI CrossFireX™ Enhancements
This release of ATI Catalyst™ enables users to verify whether an application is running in ATI CrossFireX™ mode. The new option found in the ATI Catalyst™
Control Center system tray, will allow users to verify whether a Direct3D or
OpenGL application is running in ATI CrossFireX™ mode. (The “ATI Cross-
FireX” logo will be shown on screen when the application is running).

HydraVision Support for Windows XP

This release of ATI Catalyst™ introduces HydraVision support for the ATI Catalyst ™ Control Center under Windows XP. HydraVision enables users to more efficiently organize multiple applications across single or multiple displays. Highlights include:
• HydraGrid – A new feature found in HydraVision that divides the Windows desktop into user definable areas. This helps users to more easily move and organize multiple applications.
• HydraVision Hotkeys – The ATI Catalyst™ Control Center Hotkey Manager can assist users to quickly setup and define their HydraVision specific hotkey commands.
• HydraVision Virtual Desktops – Users can configure up to 9 different virtual desktops. This enables users to manage and group multiple applications across each user defined desktop. Application positions, desktop associations and display settings can be saved for every virtual desktop.
• HydraVision Wizard – Using the ATI Catalyst™ Control Center Wizard, users can configure their HyrdaVision settings with ease.

Resolved Issues for the Windows XP Operating System

This section provides information on resolved issues in this release of the ATICatalyst™ Software Suite for Windows XP. These include:
• “Lower Resolution” message displayed when attempting to play HD content using winDVD
• Running certain OpenGL applications may intermittently cause the system to stop responding
• Some desktop corruption may be noticed when playing standard definition video while exiting full screen DOS
• Overlay rotation failing under Windows XP
• Hot unplugging the secondary device with Clone Mode enabled may cause video playback instability
• With Clone Mode and Overlay Theater Mode enabled some video playback may fail to render properly
• Some corruption may be noticed during video playback on Cyberlink winDVD7 and rotate desktop
• Midway “Stranglehold” may become
New Display Enhancements
This release of ATI Catalyst™ Linux introduces support for display scaling to
resize the display devices that support TV timings (480i/p, 720p, 1080i, 1080p)
through either digital (DVI or HDMI) or analog (component) interfaces.
Performance Improvements
The following performance gains are noticed with this release of Catalyst™
FarCry 2 – performance gains of 3 to 10% for Single card mode and 8 to 14% in
Crossfire mode, with some specific configurations showing even greater improvements.
Performance gains were noticed on all Radeon HD4xxx and Radeon
HD3xxx products.
S.T.A.L.K.E.R.: Clear Sky – performance gains of 6 to 18% in single card settings
and 10 to 30% in CrossfireX mode. Performance gains were noticed on all
Radeon HD04xxx and Radeon HD3xxx products.

http://ati.amd.com/support/driver.HTML

Lijepo, popravili su performanse i 3xxx verzije

to miki!

Znaci u 8.12 se mogu ocekati fixevi za CoD5. Do tada cu onda pricekati, ovo odze me ne interesuje.

hvala ti care na obavijesti :chears:. nakon instalacije radi mi openGL. sa prijasnjim mi nije radio otkad imam SP3
lijep je feeling koristit explore mode u Archicadu :P

Ocistio sam stare drivere i ccc sa driver cleanerom. Nakon instalacije novih drivera, ne mogu uc u CCC. Prijavi mi da novi CCC nema basic view nego samo advanced view. Kada kliknem na advanced nista se ne dogodi.

Evo ja instalirao 8.11 kao i obicno :) Preljepio ih preko 8.9 u Windozama i restartao sistem bez problema, jebes drivercleaner i ostale guru-spike. CrossFire radi bez frke naravno.

Više nema GART i South Bridge drivera u paketu ili ja nešto krivo gledam? :stoopid:

Performanse nikakve nisam primjetio u FarCry 2, barem ne po FarCry 2 benchmarku. Dapače, pred kraj benchmarka imam veće rupe u grafu, tj. minimalni FPS mi je sada 16, a na 8.10. driverima bio je 19.

Počistio sa Driver Sweeperom pa stavio,ok zasad (Far Cry2,HL2 - Orangebox, ETQW,UT3,WoW,Fifa09)

Meni se klalo sa SP3 na XP-u. Sad sam stavio na server08 i radi normalno.

stavio preko 8.9 i radi sve ok,nego jel hydraGrid samo za vistu ili ide i na xp(ako ide ne vidim di je to :S )

Ajd ponovo pročitaj "new features" :nono:

i dan-dva nakon na drugoj temi:


http://imgcash5.imageshack.us/img122/3743/20qo0.gif

8.11 driver i i overclock?!
 

Imao sam dosad 8.10, i tamo sam lijepo s riva tunerom oc-ao kako sam htio, sve super (vista 64bit), i sad stavio 8.11 i kitaaa! Nemrem OCat nigdje! AMD GPU TOOL, ATI Tool, Riva Tuner, Power nesto..
U svakom programu stavim neku frekvu, applayam i on vrati na staru :s

S overdriveom sam sad OCao, al to nije dosta..jer ide vise nego mi on dopusta :s

Pokusao sam stavit opet 8.10 drivere, unistalirao 8.11, cak sam i pocistio s driver cleanerom, ali dok se driveri instaliraju i restartam komp ne radi.. 60Hz osvjezenje, bez ccc-a i sve u k***u. Tak da sam sad na 8.11 opet, al bez OC-a.

Rjesenje neko? O.o

hvala

:smoke: hehe

Mislis na ovo : "HydraVision Support for Windows XP"? Instalirao no ne nudi mi hidraGrid,samo hydravision desktop managment i multidesk.

Mislio sam na ovo :

HydraVision Support for Windows XP

This release of ATI Catalyst™ introduces HydraVision support for the ATI Catalyst ™ Control Center under Windows XP. HydraVision enables users to more efficiently organize multiple applications across single or multiple displays. Highlights include:
• HydraGrid – A new feature found in HydraVision that divides the Windows desktop into user definable areas. This helps users to more easily move and organize multiple applications.

Panju stari, ovo nije zbog drivera ili instalacije istih, nego mi nesto onemogucava CF u igrama. Dali ATT ili stodrugo, pojma nemam.

Na bugu pise da ce u verziji 8.12, serija hd4*** dobiti podrsku za "ati stream" i da ce u ccc ukljuciti avivo converter koji koristi stream procesore sa grafičke za dekodiranje,kodiranje videa!!!

BUG Lol :D

:p

Zanimljivo je da Čmark 06 uredno ukljuci obje kartice, ali igre ne. Vjerovatno su Windoze nakon 3 godine zrele za reinstall ili Format C: :D

zna netko kako povecati OC granice u CCC ili kako preko CCC staviti 2d i 3d taktove?

nebi bas petljao po biosu, ipak grafu mislim skuriti dok dojde EOL (ako bu jos gara vrijedila :D)

Oc granice u samom ccc-u neces moci promijeniti, ali kakve taktove postavis tamo ti ce ti vrijediti za 3d mode, a u 2d ce se vracati na tvornicke 2d postavke.

hm...a ccc nema mogucnosti nastelavanja 2d taktova? :fiju:

zivio driver cleaner? :goood:

Možeš povečati OC granice jer je serija 4800 ustvari zaključana.
Prouči ove linkove da sad ja ne pišem opet sve što je napisano tamo :)
http://forum.pcekspert.com/showthread.php?t=118175
http://www.xtremesystems.org/forums/...d.php?t=197219

normalno da moze, ali on je pitao dal to moze iz ccc, bez prckanja po biosu :)

Od tamo nemoze, jer je lokirano na odredjenu vrijednost. E sad, drugim biosom i preko rive se moze (te drugih alata), a za ccc bi se u teoriji moglo kada rucno editiras profile koje si kreirao preko ccc-a (tamo mozes sloziti i 2d/3d profile, ali ih rucno palis) i tamo forsiras druge vrijednosti, medjutim opet ce ovisiti o biosu i kakve su tamo vrijednosti slozene.

a da jednostavno koristis att?? Tamo mozes stavit i na 1THz core clock!!!

gle, att ne zelim, ati tool mi je debilan a rivu sam do nedavno koristil.
a razlog zbog kojeg ne zelim fix taktove je jer mi onda grafa skoci na 50celzija u idle, sad je 38 na default clock...
u toj gornjoj komori su mi samo 2 venta na ispuhu iz case-a, tak da se i taj porast temp osjeti na procu ( 5-8 celzijusa mi je razlika ^^)
a bios nikad na grafama nisam flashal, nemam floppy i ne mislim se s time zejebavati :)

edit: slagal sam 2d/3d taktove u att skupa s onim da automatski prebacuje, al to je meni previse bugovito :)

Ne može jer je max frekva zaključana u biosu.

al opet moze preko 100% downlclockat i overclockat

Postoji li negdje mozda beta 8.12 drivera koji je najavljen za 10.12.? Ne radi mi bas naj ovaj 8.11 driver, a niti sa 8.10 nisam bas nesto bio zadovoljan.

8.12 izlaze 10.12.2008 mislim, pa sacekaj jos malo.

OMFG
http://www.imagesforme.com/out.php/t242942_maxclock.jpg
Đabe mu ATT kad je frekva ograničena u biosu.Po tebi su ljudi onda budale kad su napravili ovaj Radeon Bios Editor kad se to može iz ATT-a,LOL.

novi driveri
 

Bok


Evo ovako dok pokrenem svaku igru otvori mi se prozoric i pise u njemu da su mi driveri za grafu pre stari i ja sam napisal na googleju ati radeon hd 3850 latest drivers ali nikako da najdem te drajvere sve sam preiskal pa ako neko zna di ih ima da si ih skinem hvala...

Ne pokreće mi se CCC sa novim driverima.
Naime sa Driver Cleaner-om sam pobrisao stare drivere i instalirao nove.

Prijedlog??