Tvoj vent je odličan i nemaš potrebe mjenjati. Prihvatljive cijene za kvalitetu baš nema. Osiromašila se ponuda u Hrvatskoj, sasvim poražavajuće.

ma ne kažem ni ja da su loši, ali gledao sam neke usporedbe da sa drugm ventovima ovaj hladnjak može dati i više, pogotovo zato što dotični nf-p12 i ne briljiraju toliko po pitanju static pressure-a.

U Links stigli COOLERMASTER EXCALIBUR


@raliSHA ako ti treba više static pressure ne trebaš tražiti dalje

Oh oh, neloše.

Opa! Odlicni ventovi, vec neko vrime pokusavam nabaviti Excalibura na casekingu ali nikako da se skupi ekipa za narudzbu.. Sad su barem dostupni kod nas, morat ce pasti jedan :)
Review

Jedan je već pao :)

Kupio danas Xigmateka XLF 1500rpm za grafu i ventilator je iznimno tih za tih 1500rpm i mislim da je dobra kupnja, 69kn. U svakom slucaju bolji od Slip Stramova koji se prodaju za slicne novce i koji su mi svi do jednog "pokvareni". Jednostavno se vise ne vrte ko prije i pocinju se jako grijat i sve to nakon godinu ili manje..

Prolimatech Launches Aluminum Vortex Silver Wings 140 mm Fan

The Aluminum Vortex Silver Wings comes equipped with red LEDs and measures 140 x 140 x 25 millimeters. Due to the use of Aluminum fan blades, the unit is an extraordinary addition to the already potent Vortex series. In this constellation of 13 blades these overlap slightly at the base which is one of its beneficial attributes. The results speak for themselves, as the Aluminum-Vortex manages to push an amazing 214.6 m³ of air at 1600 RPM and 12 Volt.

Zvjerčica

http://www.techpowerup.com/153782/Pr...40-mm-Fan.html

Akasa - Apache Black - 140 mm

http://www.abload.de/img/akasa-140mm-apacheblac0u72.jpg

Akasa Apache Black
Fan speed: 600 - 1300 rpm
Max airflow: 89.55 CFM
Noise level: 12.5 - 22.19 dB(A)
Bearing: HDB (Hydro Dynamic Bearing)
Fan life expectancy: 50,000 hours
Connector: 4-pin PWM


Akasa - Viper - 140 mm

http://www.abload.de/img/akasa-140mm-viperfanpuop.jpg

Akasa Viper
Fan speed: 600 -1600 rpm
Max airflow: 110.61 CFM
Noise level: 12.5 - 26.01 dB(A)
Bearing: HDB (Hydro Dynamic Bearing)
Fan life expectancy: 50,000 hours
Connector: 4-pin PWM


Alpenföhn - Wingboost - 140 mm

http://www.abload.de/img/alpenfhnwingboost1402suvt.jpg

Alpenföhn Wingboost
Fan speed: 7V = 600 (adaptor included) / 12V = 1100 rpm
Max airflow: ? CFM
Noise level: 19.4 dB(A)
Bearing: HD
Fan life expectancy: ?
Connector: 4-pin PWM


Cougar - Vortex HDB - CF-V14H - 140 mm

http://www.abload.de/img/cougarvortexhdb21u78.jpg

Cougar Vortex CF-V14H
Fan speed: 700 (with adaptor) / 1200
Max airflow: 55.5 / 70.5 CFM
Noise level: 16.4 / 19.2 dB(A)
Bearing: HDB (Hydro-Dynamic Bearing)
Fan life expectancy: 300.000
Connector: 3-pin


Deepcool - UF140 - 140 mm

http://www.abload.de/img/deepcool-one-piece-redvz1f.jpg

Deepcool UF140
Fan speed: 700 ±200 ~ 1200 ±10% rpm
Max airflow: 71.8 CFM
Noise level: 17.6 ~ 26.7dB(A)
Bearing: 2 Ball Bearing
Fan life expectancy: ?
Connector: 4-pin PWM


Noctua - NF-P14 FLX - 140 mm

http://www.abload.de/img/noctua_nf_p14_2i7ey.jpg

Noctua NF-P14 FLX
Fan speed: ULNA = 750 / LNA = 900 / 1200 rpm *
Max airflow: ?
Noise level: ULNA = 10.1 / LNA = 13.2 / 19.6 dB(A)
Bearing: SSO Bearing
Fan life expectancy (MTBF): 150,000 hours
Connector: ?
* ULNA = Ultra Low Noise Adaptor / LNA = Low Noise Adaptor


Noiseblocker - Blacknoise Silent Pro - 140 mm

http://www.abload.de/img/noisblockerblacknoisesqcfv.jpg

Noiseblocker Black Noise Silent Pro
Fan speed: 700 / 1.200 / 1700 rpm (depending on model)
Max airflow: 28.6 / 54.7 / 90 CFM
Noise level: 9 / 20 / 27 dBA
Bearing: ?
Fan life expectancy: 180.000 / 140.000 / 120.000 hours
Connector: 3-pin


NZXT - FX-140LB - 140 mm

http://www.abload.de/img/nzxtfx-140lb-140mmkk74.jpg

NZXT FX-140LB
Fan speed: Low = 1000 / medium = 1.500 / high = 2000 rpm *
Max airflow: 49.1 - 98.3 CFM
Noise level: 22.1 - 37 dBA
Bearing: Fluid Dynamic Bearing
Fan life expectancy: 35.000 hours
Connector: 4-pin Molex and 3-pin Mainboard
* has a three position fan speed switch built in


Scythe - Kaze Maru - 140 mm

http://www.abload.de/img/kaze-maru-140mm-500rpm1xf6.jpg

Scythe Kasa Maru
Fan speed: 500 / 1200 / 1900 rpm (depending on model)
Max airflow: 29,39 / 61,30 / 104,54 CFM
Noise level: 10,80 / 26,58 / 41,13 dB(A)
Bearing: Sleeve Bearing
Fan life expectancy (MTBF): 30.000 hours
Connector: 3-pin


Scythe - Kama Flex - 135 mm

http://www.abload.de/img/scythekamaflex135mm3lvr.jpg

Scythe Kama Flex 135
Fan speed: 800 / 1200 / 1600 rpm (depending on model)
Max airflow: 49,8 / 75,6 / 100,5 CFM
Noise level: 16 / 23,2 / 33,1 dBA
Bearing: S-FDB
Fan life expectancy (MTBF): 120.000 hours
Connector: 3-pin


Scythe - Slip Stream - 140 mm

http://www.abload.de/img/scytheslipstream1402hyf4.jpg

Scythe Slip Stream 140
Fan speed: 500 / 800 / 1200 / 1700 rpm (depending on model)
Max airflow: 27,2 / 43,5 / 65,2 / 92,4 CFM
Noise level: 9,6 / 14,3 / 23,2 / 36,4 dBA
Bearing: Sleeve Bearing
Fan life expectancy (MTBF): 20.000 hours
Connector: 3-pin


Be Quiet - Silent Wings USC - 140 mm

http://www.abload.de/img/silentwingsusc-140mm2uosx.jpg

Be Quiet Silen Wings USC
Fan speed: 12V = 1000 rpm
Max airflow: 12V = 60.4 CFM
Noise level: 12V = 16.5 dBA
Bearing: FDB
Fan life expectancy: 300.000 hours
Connector: 3-pin Molex


Silverstone - AP 141 - 140 mm

http://www.abload.de/img/silverstoneap1412vz5d.jpg

Silverstone AP141
Fan speed: 5V = 700 rpm / 7V = 1000 / 12V = 1500
Max airflow: 5V = 28.26 / 7V = 41.09 / 12V = 64.34 CFM
Noise level: 5V = 18 / 7V = 20.9 / 12V = 30.1 dB(A)
Bearing: Fluid Dynamic Bearing (FDB)
Fan life expectancy (MTBF): 50.000 hours
Connector: 4-pin Power Connector


Thermalright - TY140 - 140 mm

http://www.abload.de/img/thermalrightty-140_12bx4r.jpg

Thermalright TY140*
Fan speed: 900 ~ 1300 RPM
Max airflow: 28.3 ~ 74CFM
Noise level: 17 ~ 21dBA
Bearing: Enhanced Hyper-Flow Bearing (EHFB)
Fan life expectancy: ?
Connector: 4-pin PWM
* 12 cm mounting hole


Titan - Kukri - TFD-14025H12ZP/KU(RB) - 140 mm

http://www.abload.de/img/tfd-14025h12zp-kurb2mumn.jpg

Titan Kukri TFD-14025H12ZP/KU(RB)
Fan speed: 700 ~ 1800 RPM
Max airflow: 34.78 ~ 89.43 CFM
Noise level: <8.3 ~ <28.8 dBA
Bearing: Z-AXIS
Fan life expectancy: 60.000 hours
Connector: 4-pin PWM function


Titan - DC Fan - TFD-14025 xxxx - 140 mm

http://www.abload.de/img/tfd-14025m12x25ub7.jpg

Titan DC Fan TFD-14025 xxxx
Fan speed: 600 / 900 / 1200 / 1500 / 1800 (depending on model)
Max airflow: 38.58 / 56.74 / 68.23 / 94.89 / 113.87 CFM
Noise level: 7 / 15.8 / 22.1 / 26.9 / 30.9
Bearing: ?
Fan life expectancy: ?
Connector: 3-pin


Xigmatek - XAF-F1452 - 140 mm

http://www.abload.de/img/xigmatek-xaf-f14522fudm.jpg

Xigmatek XAF-F1452
Fan speed: 800 ~ 1300 R.P.M.
Max airflow: max 90.3 CFM
Noise level: <18 dBA
Bearing: Aeronautical Oil System Bearing
Fan life expectancy: 150.000 hours
Connector: 4-pin PWM


Xilence - 2CF (2 component fan) - 140 mm

http://www.abload.de/img/xilence2cf2componentfajyzq.jpg

Xilence 2CF
Fan speed: 700 - 1200 rpm
Max airflow: 70.79 CFM
Noise level: 17,6 - 26,7 db(A)
Bearing: Ball Bearing
Fan life expectancy: ?
Connector: ?


Zaward - ZG2-140B - 140 mm

http://www.abload.de/img/zawardzg2-140b2j94x.jpg

Zaward - ZG2-140B
Fan speed: 300 - 1.200 RPM
Max airflow: 28.3 ~ 74CFM
Noise level: 10,1 - 20,3 dB(A)
Bearing: Enhanced Hyper-Flow Bearing (EHFB)
Fan life expectancy: 60.000 hours
Connector: 4-pin PWM

Pozz.
Ima li tko iskustva s Scythe Kama Flow2 , odnosno kako bi se ponašali na hladnjaku?
Probao sam pronači na netu koliki je statički pritisak ,ali nisam uspio nači.

super su na kulerima, ali samo uz fan controller ili ručno undervoltanje jer su dosta glasni ;)

ovaj od 900 rpma bi trebao biti necujan i nekakav best buy. sutra idem po 2 vidicemo cete ce

taj od 900rpm ima samo nekih 30ak CFM

http://www.scythe-eu.com/en/products...flow-2-80.html
http://www.scythe-eu.com/en/products...flow-2-92.html
http://www.scythe-eu.com/en/products...low-2-120.html

a sta bi ti, buru i tisinu, neide bas... imho sve preko 1000rpm je cujno

za case fan je u redu ali za kuler treba bit jači ipak malo jer treba gurat zrak kroz silne finove :)

evo ubo sam dvije kame flow2 900rpm 120mm, iz nekog razloga ova koju sam stavio na ispuh je 90% necujna dok je ova na upuhu cujna, te sam je stisao na 700rpm tek tad je kao ova prva

Poturpijaj si kućište da budu samo rupe di su ventovi, bez perforiranog lima i vjerojatno će ti ventovi biti jednako bučni/tihi.

ma neda mi se. zakljucio sam da postajem prevelik tisina freak - racunalo jednostavno ne moze biti 100% necujno ako ima ventilatore. moze biti blizu necujnom ali nikako 100%.
po noci iskljucio sam sve i upalio samo kamu na 600rpm i seasonic 520(takodjer 600-700rpm)- primjeti se razlika, tj u sobi je nekako glasnija tisina :D

100% necujno jedino sve pasivno + ssd. bilo bi lijepo imati i za mene dapace pozeljno jer komp radi 0-24/7 i spavam 0.5m pored njega, ali previse para i zajebancije da sad idem sve kupovati mijenjati pfff

Sad malo gledal za novu kantu slažem...od prijenavedenih našao novog šampiona
i novi apsolutni best buy (naravno,gledano od ovih što se ne glasaju ko Mig21 HRZ-a)

Jes da je egzotika al možemo uvijek novi group buy nabacit(sad smo i u EU pa netrebam u ekspedicije za graz ko prije 4 godine) :D

Imah taj bitfeniks, ono nit smrdi nit miriše. Cors je ok na nižim okretajima :D, i napokon su izbacili i pwm ventove. Sad mi je žao što nisam čekao, već sam uzeo 3 pin

PWM verziju ili običnu si imao? Ovaj PWM ima dobru mm-h2o vrijednost,ko moji noiseblockeri...samo su jedtiniji 7€

nemas taj bitfenix sigurno :D imam ga ja, pro model, sam od 1200okr/m. i mogu reci da je skoro pa necujan na max okretajima - ali ovaj iznad na 1800 nije sigurno... :D

1200okr i skoro nečujan :no2drug: :D


Obične

rekoh, skoro :D
define mini je bio u pitanju ;)

Sve jasno....naslov teme je: high static pressure fans...a pro verzija...spada u high :D

A gle, po tome i delte ulaze u selekciju, pa to neznači da ih zapravo netko tko je prosječni korisnik koristi.


Uglavnom, da, izbor ventova kod nas je slab.

Pa ulaze da,imaš ih spomena na početku :D smao kaj se čuju ko mig21 HRZ-a :D

I da mi smo slabi....al smo sad u EU :)

Samo, nevrijedi ti sto smo u EU kad 95% trgovina u DE nesalju za cro, pogotovo navedeni caseking...ako nemas nekoga u DE da ti to donese, na istom si kao i prije ulaska u EU :D

Šalju za Graz bez beda :) isprobano...trebalo bi vidjeti i za Sloveniju pa na PO na Bregani naručiti...

Šta je trenutno isplativo uzet od 12tica u Linksa?

Jel još vladaju CMovi SickleFlowovi ili se pojavilo šta drugo? Šta je sa Scytheovima?

Nedavno sam uzeo F12 od ACa... Viču previše za posao koji rade :(

Scythe Grand Flex PWM ako ide za CPU cooler

Više na ispuh van, i dosta blizu rešetke (nažalost) :( ali hvala na informaciji :)

Moze delete. Krivo postano.