Autor nino (Post 1471154)

Ma nedam ga za nikakve pare. :D

Autor d4rk_ch1ld (Post 1484351)

Evo s 10 min OCCT, tu se vide pojedine jezgre. Otkud ova razlika na jedno jezgri? Je to normalno?
http://www.imagesforme.com/thumb/thumb_59809111.jpg

Autor d4rk_ch1ld (Post 1495399)

Evo nakon malo bclkanja digo sam množitelj i dobio ovo. Nije loše al nisam testirao stabilnost i benchao jer se bojim kurit na tim voltažama i zračnim hlađenjem. Sumnjam da je stabilan.

Autor d4rk_ch1ld (Post 1495629)

Budem, ali kad malo zahladi jer je na 45+ stupnjeva u idle-u :fuming:.

Autor Razer (Post 1495915)

Evo ja sam se malo poigrao sa svojim sa multijem 24 (pri dvije jezgre):

http://valid.canardpc.com/cache/banner/849542.png

Zasada 4.75GHz na zraku, na 4.7GHz bez brige prolazi Aquamark, 3DMarkove nisam probavao...

Mrvicu sam pretjerao s naponom i sa 1.49v prolazi... temperature mi ne predstavljanju neki problem, barem ne zasad.

Autor Razer (Post 1496269)

Primjetio sam doduše da je GB promijenio svoj socket na P55A-UD4P modelu sa prethodnog Foxconnovog (P55 UD4P) na trenutni Lotes...

Autor Wolverine

A onda niš od klukanja :D

Autor Ivan123 (Post 1496461)

Promijenio je samo kuciste, tj poklopac, dok su pinovi ostali isti

Autor Rajinder Gill

Behind the scenes, Foxconn admitted there was a socket update in June that was approved by Intel with planned implementation in the August time period. We have the test report papers and the revised Foxconn socket passed all of Intel’s stress tests before it was placed into production, which raises questions as to why there has been problems post retail release. Intel has only commented that they believe the problems can occur with improper force being placed on the socket. However, that does not explain the lack of pad contacts with a retail CPU cooler and new processor that we have experienced in several situations.

Whether the reported socket issues were down to poor contact, improper clamp force, or a limitation in design (limited tolerances beyond stock specifications) is unknown to us at present. We’ve spoken to a few board engineers and nobody has been able or willing to put a firm conclusion on the matter, at least on the record.

Off record, early results from failed boards or user reports appeared to be a serious enough problem that most of the manufacturers moved to the Lotes or Tyco AMP sockets in their high-end boards or others for that matter. We have to stress that our problems and those of others we have dealt with directly occurred under extreme overclocking conditions. Out on the forums, we’ve heard of one reported case where a user claims a failure has happened at stock operating frequency using an Intel air cooler. We also have verification of a Lotes socket failing recently, which does put a new light on this problem.

Autor d4rk_ch1ld (Post 1496511)

Mi možeš pojasniti kak si dobio 24 multi? :

Autor Razer (Post 1496515)

Tnx. U vezi multija 24, stvar je ovakva. Samo ugasiš dvije jezgre i pojavi se mogućnost multija 24. Znači ako koristiš jednu ili dvije jezgre možeš vrtjeti multi 24. A ako vrtiš sve četiri onda možeš vrtjeti multi <21. Množitelji 22 i 23 nisu dostupni.