SuSE 9.2 Pro - sensors

[No123]

Pokrenuo sam sensors-detect i svugdje kada me pitalo nesto stisnio sam enter osim kada me pitalo ocu ISA/smbus izabrao sam smbus.

Onda sam u file /etc/modprobe.conf.local dodao:

#I2C module options
alias char-major-89 i2c-dev

A u file /etc/rc.status sam dodao:

# I2C adapter drivers
modprobe i2c-i801
modprobe i2c-isa
# I2C chip drivers
modprobe eeprom
modprobe w83627hf
/usr/bin/sensors -s

I nakon restarta kada sam pokrenio sensors dobio sam ovo:



eeprom-i2c-1-52 Adapter: SMBus I801 adapter at 0400 Memory type:
DDR SDRAM DIMM Memory size (MB): 256

eeprom-i2c-1-50 Adapter: SMBus I801 adapter at 0400 Memory type:
DDR SDRAM DIMM Memory size (MB): 256

w83627thf-isa-0290 Adapter: ISA adapter
VCore: +1.63 V (min = +1.93 V, max = +1.93 V)
+12V: +12.16 V (min = +10.82 V, max = +13.19 V)
+3.3V: +3.36 V (min = +3.14 V, max = +3.47 V)
+5V: +5.07 V (min = +4.75 V, max = +5.25 V) -12V: -14.91 V (min = -10.80 V, max = -13.18 V)
V5SB: +5.16 V (min = +4.76 V, max = +5.24 V)
VBat: +0.16 V (min = +2.40 V, max = +3.60 V)
fan1: 0 RPM (min = 1278 RPM, div = 32)
CPU Fan: 0 RPM (min = 21093 RPM, div = 2)
fan3: 2057 RPM (min = 42187 RPM, div = 4)
M/B Temp: +23°C (high = +8°C, hyst = +4°C) sensor = thermistor
CPU Temp: +20.5°C (high = +80°C, hyst = +75°C) sensor = thermistor
temp3: -48.0°C (high = +80°C, hyst = +75°C) sensor = thermistor
ERROR: Can't get VID data!
alarms: beep_enable: Sound alarm enabled


E sad sta mu znaci: ERROR: Can't get VID data!

Kako da je VBat: +0.16 V ?

I kako je: CPU Fan: 0 RPM

I sta mu je: temp3: -48.0°C


:confused: :confused:

[Killkenny]

To ti je bug koji je cest kod SuSe distribucija puno je prasine bilo oko toga zasto nisu to rjesili?
Posebice ako koristis neki svjeziji kernel. Sto se ti ce popravka problema ako se to uopce moze nazvati tako, probaj >> lm_sensors 2.8.6 mozes ga naci ovdje :

ftp://ftp.pbone.net/mirror/ftp.links...kman/suse/9.2/

a ako ti to ne bude poslo od ruke probaj ovdje


http://rpm.pbone.net/index.php3/stat...onth/05/day/21

[No123]

Nigdje nisam pronasao lm_sensors RPM za SuSE 9.2, valjda zato sto je on integriran u kernel kod SuSE 9.2 :confused:

SuperKaramba mi prikazuje temperature i brzine ventilatora na ekranu i primjetio sam da mi je jednom na trenutak bila prikazana brzina CPU Fan ali je odmah poslije toga bila nula :confused:

Gledao sam na SuSE forumu ali nisam nista nasao :confused:

[Killkenny]

Nisam moram priznat upoznat s tim programom ali ne bi trebao imati poteskoca jer kazu na "SuSe 9.2" forumu da je problem rjesen s ovom verzijom tog programa ..

[Killkenny]

pa kako probaj ovo ?:confused:

http://rpm.pbone.net/index.php3/stat....i386.rpm.html
http://rpm.pbone.net/index.php3/stat....i386.rpm.html
http://rpm.pbone.net/index.php3/stat....i386.rpm.html
http://rpm.pbone.net/index.php3/stat....i386.rpm.html

Moras prvo makniti "stari" rpm da bi instalirao ovaj ..

[No123]

Originally posted by Killkenny
pa kako probaj ovo ?:confused:

http://rpm.pbone.net/index.php3/stat....i386.rpm.html
http://rpm.pbone.net/index.php3/stat....i386.rpm.html
http://rpm.pbone.net/index.php3/stat....i386.rpm.html
http://rpm.pbone.net/index.php3/stat....i386.rpm.html

Moras prvo makniti "stari" rpm da bi instalirao ovaj ..

Ja uopce nemam instaliran lm_sensors RPM, YaST ga uopce ne pronadje :confused:

A kada probam instalirati taj s linka koji si dao javlja mi neke konflikte i da mi fali perl-modules, kernel-sensors-2.6 i libsensors.so.3, taj RPM izgleda nije za SuSE 9.2 :confused:

[Killkenny]

onda zaista ne znam , isti se vodi kao program za SuSe 9.2 ?

[No123]

Kod mene u YaST-u ima samo RPM za sensors a ne za lm_sensors.