|
|||||||||||
07.03.2006., 22:18
|
#1 |
|
Super Moderators
Datum registracije: May 2002
Lokacija: Zg
Postovi: 17,469
|
SLI and CrossFire Push Power Supplies to the Limit
Dobro pogledajte kakvo napajanje zahtjevaju dvije mrcine u SLI/CrossFire modu...grozno: hitthewa "512MB gaming cards in SLI/CrossFire will pull anywhere from around 15A to slightly over 20A (taking 120W divided by 12V = 10A per card) meaning that our +12V3 rail was overloaded as it has to share the power draw from the motherboard as well (which typically draws around 2 ~ 3A on its own). Since we rate our power supplies conservatively, the ST60F could actually run Kelt's 7800GTX 512MB SLI system for a while despite being technically overloaded on the +12V3 rail. As soon as the over current protection point of 20A on the +12V3 is reached, the power will automatically shut down." Cijeli članak: http://www.extremetech.com/article2/...1932947,00.asp Zadnje izmijenjeno od: Jelc. 07.03.2006. u 22:59. |
|
|
|
07.03.2006., 22:41
|
#2 |
|
M.U.P.
Datum registracije: Sep 2004
Lokacija: Zagreb
Postovi: 2,277
|
Sve će se to vratit na 1 12v rail i amen 
__________________
|
|
|
|
|
|
|
|
Oglas
|
|
 |
|
|
