XBMC aka KODI

[Ziiky]

Evo i Beta 2 Camelot je izašla ... link za download



Od stare bete1 do sada ispravljeno je oko 200 bugova, sve u svemu; jedva cekam da ju probam.
Coderi rade punom parom i vjerujem da cemo uskoro ugledati i finalnu verziju XBMC Camelot-a.

[fre@k]

ziiky dali znas kako da umjesto da skenira cijelu bazu da umjesto recimo "E:\filmovi" bude "G:\filmovi"...prebacio sam filmove na drugu particiju i sad vise nije isti path do filma pa da nemora sve ponov skenirati nego da mu zadam drugi path ali znaci da sve ostane isto...ak je to uopce i moguce

[Ziiky]

Završila je i beta faza testiranja, Camelot Release Candidate 1 je vani ... link za download

Ovo je zadnji pre-release prije finalnog, tj. i zadnja šansa za instant masovni bug fix.
Sve daljnje verzije će bit znatno rijeđe, a bugovi se neće ispravljati u ovakvom obimu.

Iduće što slijedi je finalna verzija novog XBMC: Code name Camelot

[fre@k]

pohvale na veliko, nemoram dodavat novi skin, puno brze pronalazenje info-a i ostalih stvari, nema bugova (kao sto je prije bilo za hd materijale ili s pozadinskim zvukovima), autmatski pri instlaciji dodaje dx, 100 filmova je ucito za manje od 10min sto je za nepovjerovat kod prijasnjih verzija mi je trebalo po 2h, i ono sto je najbitnije sve je puno mogucnosti npr. ono sto mi se svidja kod library mode-a je mozes maknuti info iz pozadine (sakriti ga) ono sto prije nije nasao sad pronalazi, serije prije koje nisu mogle biti pronadjene s scraperom nisi ih mogo ucitati sto sad nije opcija ili se meni sam cini...stvarno odlicno odradjen posel

[sinisa1989]

Evo probat ću i ja. Ja sam sa prvom verzijom imao artefakte.

[fre@k]

ajd ako se nekom da pa nek proba apple trailere, ja sam ucitavao 2500 trailera preko 1 i po h, uzima oko 400mb e sad problemcic je u tome sto mi nece sljakat stream vec samo download, pogledat cu jos u firewallu ali mislim da to nebi trebao biti problem ako ide down

[Ziiky]

Autor fre@k

ajd ako se nekom da pa nek proba apple trailere, ja sam ucitavao 2500 trailera preko 1 i po h, uzima oko 400mb e sad problemcic je u tome sto mi nece sljakat stream vec samo download, pogledat cu jos u firewallu ali mislim da to nebi trebao biti problem ako ide down

Nisam probavao na zadnjoj i predzadnjoj verziji, ali prije mi je radio sa malim editom stringa nize opisanog.
Nije grska u XBMC-u, vec u politici Appla. Pomocu ovog tweak-a Apple site ce XBMC vidjeti kao QuickTime
Obrati paznju da imas Apple movie trailer kao skriptu, isti taj imas kao plugin, a imas i apple movie trailer lite.
Potrebna ti je skripta da bi ispravno radilo ...

Aj probaj ovo prepraviti ovako (koristi notepad)

Pogledaj mplayer settings u mplayer.conf fajlu. XBMC koristi mplayer librarys za AppleMT

Fajl se nalazi u:
XBMC/system/players/mplayer/mplayer.conf

Nadji u fajlu redak gdje su postavke za http user-agent, string ovako izgleda:

user-agent=XBMC-mplayer/1.1.0(MPEG)

Taj string je pogresan posto Apple odbija download zahtjeve od NonApple programa, tj. preferira QT

Promjeni ga u:

user-agent=QuickTime/7.2

[fre@k]

imam samo paplayer i dvd player hmm

EDIT: rijeseno oso na svn repo installer i oso pod"SCRIPT" i tamo sam instlirao apple trailere isto i sad radi bez greske dodas home theater expirience i zakon stvarcice radi i stream na najboljoj kvaliteti sve uredno sljaka

maloprije sam nasao negdje da ima opcija kad pogledas trailer da ti ga on obrise iz library-a i sad da ga krunis nemogu vise naci, ako netko zna nek napise nije za glavu

[Ziiky]

Stizu nam 2 iznenađenja za Božićne blagdane

XBMC 9.11: Camelot finalna verzija je vani ... link


XBMC 9.11: Camelot
December 24th, 2009
Team XBMC

It’s been quite a while in the making (and maybe a bit late), but Camelot has arrived for Windows, OSX, Linux, and XBMC Live, and just in time for the holidays. Noteworthy changes include a revamped user interface via the new default skin “Confluence“, DirectX support by default for the Windows platform, a complete reorganization of the settings menus, automatic video information extraction, and smoother video playback. In addition, all scrapers have been updated, new remotes are supported out of the box, and codecs have been updated for more reliable playback. For a full changelog, see the end of this post.

Look to the download page for the good stuff. We wish to thank our community for helping to make XBMC what it is. Several new skins and plugins have been created since Babylon, be sure to check them out as well.

For the developers, this is where the fun starts. To quote the great Linus Torvalds, “A release is not so much of a birth of a new version, it’s more of a laying-to-rest of an old one. It’s also an end to a fairly quiet period.” It’s now open-season for us to start looking forward and begin merging in all those new features that have been brewing. Enjoy our latest offering as we get back to work!

As a brief aside, we’re looking to recruit a talented web developer as well as a graphics designer for a few future endeavors. If you’re interested in more detail and have serious skills (no weekend warriors please), drop us a line.
Read on for the condensed changelog:
Read more…




Transparency! v2.11 released ... link
December 24th, 2009
ronie

If you have been running XBMC 9.04 until now, it must have been a big disappointment that you couldn’t check out all the new skins, as every one of them required you to install an unstable XBMC svn version. Luckily, with the release of XBMC 9.11 Camelot, this has come to an end. With the 9.11 release you’ll not only be able to enjoy all of the new features xbmc has to offer, but there’s also a multitude of new skins to check out. To name a few, there’s Confluence (the new default skin), Ellipsis & Xperience (by team Blackbolt), Rapier (made by scarfa) and Alaska (created by djh_ & Hitcher). Be sure to check them out, they all deserve your attention. Transparency! is also one of the skins released after XBMC 9.04, so chances are you’ve never used it before.

Today sees the release of Transparency! v2.11. Have a look at the video to find out what’s it all about, or check the xbmc skin section for screenshots and a list of features included in this skin. If you want to get involved, head on over to the forum. I’m always interested in new ideas and could use some help in getting the skin translated to several languages.

Finally, a big thanx to the entire xbmc community for all the help i’ve received over the past 6 months
and, of course, my congratulations to Team-XBMC with the release of 9.11 Camelot!

[fre@k]

jasam koristio ovu verziju prije ove zadnje s 1/4 skinom trenutno sam kod bake pa nzm kak se zove ali nikak nisam mogo uspostaviti OSD unutar filma, dali je to bilo da se mora rucno podesavati link na OSD da bi radio... kad dodjem kuc poslikam da vidite

[krbo]

ajd da i ja probam XBMC po prvi put..

dugo veće čekam neko zgodno "daljinac only" sučelje za HTPC

download&install = bez problema

first run = (mkv) razočarenje, neka crvena, tamna, nekontrastna slika, od DXVA ni "D".
Tristo puta lošije od običnog MPC HC.

Sve to na Win7 koji ima native h264 DXVA i ATI HD3200

Malo mi je nejasno zašto se petljaju u digitalnu sliku?
Po defaultu je treba propustiti na HDMI bez ikakvog petljanja po svjetlini, bojama i kontrastu, a dozvoliti isto onima koji to žele.

Zanimljivo je da default skin izgleda izvrsno.

Znači, ako hoću ikakav pametniji setup treba kopati po nekim konfig fajlićima, Wiki, Web i sto čudesa...
Možda mi se i bude dalo

[fre@k]

pa sad je sve manje vise automatizacija...dodas folder s filmovima i odaberes scrapera i on sam pretrazi s neta slike i info i sve to...

[Dac]

lijepo to radi, sve je bolji. ali nije sve u lijepoj prezentaciji jer mi se slika čini lošija nego u KMPlayeru, a to se odnosi i na divx (upscale, 1080p televizor) i mkv na kojem zbilja nisam očekivao degradaciju slike. k tome nedostatak DXVA me opet vraća na KMP jer mi skače opterećenje procesora i automatski pojačava ventilaciju i buku

[Hrvoje xyz]

Ja koristim fkt dosta programa za gledanje filmova s laptopa , i mogu rec da je slike (meni!!) ista na ovom XBMCu ko na tim programima (GOM , km player , vlc, mpc ).Na nekima je ukljucena DXVA na nekima nije . Fora mi je sucelje a ne onak da moram bulaznit po folderima laptopa.
Jedino mi je šok bio kad sam nisam mogao naci gdje kliknuti za ici jedan korak unazad
reko pa nije moguce da su napravili da se nemoze misem sve..
ali moze se sve

sa dobrim bezicnim misem ovo postaje fora

cak ima opcija za subtitlove , neznam dal radi nije mi se dalo probavat.

[Ziiky]

- <!-- used in the current window's section. Note that there is only handling --> - <!-- for a single action per button at this stage. --> - <!-- For joystick/gamepad configuration under linux/win32, see below as it differs from xbox --> - <!-- gamepads. --> - <!-- The format is: --> - <!-- <device> --> - <!-- <button>action</button> --> - <!-- </device> --> - <!-- To map keys from other remotes using the RCA protocol, you may add <universalremote> blocks --> - <!-- In this case, the tags used are <obc#> where # is the original button code (OBC) of the key --> - <!-- You set it up by adding a <universalremote> block to the window or <global> section: --> - <!-- <universalremote> --> - <!-- <obc45>Stop</obc45> --> - <!-- </universalremote> --> - <!-- To find out the OBC's of your remote, try enabling the <displayremotecodes> tag in AdvancedSettings.xml --> - <!-- Note that the action can be a built-in function. --> - <!-- eg <B>XBMC.ActivateWindow(MyMusic)</B> --> - <!-- would automatically go to My Music on the press of the B button. --> - <!-- Joysticks / Gamepads: --> - <!-- See the sample PS3 controller configuration below for the format. --> - <!-- --> - <!-- Joystick Name: --> - <!-- Do 'cat /proc/bus/input/devices' or see your xbmc log file to find the names of --> - <!-- detected joysticks. The name used in the configuration should match the detected name. --> - <!-- --> - <!-- Button Ids: --> - <!-- 'id' is the button ID used by SDL. Joystick button ids of connected joysticks appear --> - <!-- in xbmc.log when they are pressed. Use your log to map custom buttons to actions. --> - <!-- --> - <!-- Axis Ids / Analog Controls --> - <!-- Coming soon. --> - <keymap> - <global> - <keyboard> <y>xbmc.activatewindow(videolibrary,movietitles)</y> <a>xbmc.activatewindow(videolibrary,tvshowtitles)</a> <g>xbmc.activatewindow(musiclibrary,albums)</g> <h>xbmc.activatewindow(pictureslibrary)</h> <j>PlayDVD</j> <e>Mute</e> <p>Play</p> <q>Queue</q> <f>FastForward</f> <r>Rewind</r> <left>Left</left> <right>Right</right> <up>Up</up> <down>Down</down> <pageup>PageUp</pageup> <pagedown>PageDown</pagedown> <return>Select</return> <enter>Select</enter> <backspace>ParentDir</backspace> <m>ActivateWindow(PlayerControls)</m> <s>ActivateWindow(shutdownmenu)</s> <escape>PreviousMenu</escape> <i>Info</i> <menu>ContextMenu</menu> <c>ContextMenu</c> <space>Pause</space> <x>Stop</x> <period>SkipNext</period> <comma>SkipPrevious</comma> <tab>FullScreen</tab> <printscreen>Screenshot</printscreen> <minus>VolumeDown</minus> <plus>VolumeUp</plus> <zero>Number0</zero> <one>Number1</one> <two>Number2</two> <three>Number3</three> <four>Number4</four> <five>Number5</five> <six>Number6</six> <seven>Number7</seven> <eight>Number8</eight> <nine>Number9</nine> <backslash>ToggleFullScreen</backslash> <browser_home>XBMC.ActivateWindow(Home)</browser_home> <browser_favorites>ActivateWindow(Favourites)</browser_favorites> <browser_refresh /> <browser_search /> <launch_app1_pc_icon>ActivateWindow(MyPrograms)</launch_app1_pc_icon> <launch_media_select>XBMC.ActivateWindow(MyMusic)</launch_media_select> <play_pause>Pause</play_pause> <stop>Stop</stop> <volume_up>VolumeUp</volume_up> <volume_mute>Mute</volume_mute> <volume_down>VolumeDown</volume_down> <next_track>SkipNext</next_track> <prev_track>SkipPrevious</prev_track> <launch_mail /> <key id="61620" /> - <!-- same as above, launch_mail, but using button code (based on vkey id) --> <home>FirstPage</home> <end>LastPage</end> <key id="65446">ParentDir</key> <key id="65459">Play</key> </keyboard> </global> - <Home> - <keyboard> <i>info</i> <end>XBMC.ShutDown()</end> </keyboard> </Home> - <MyFiles> - <keyboard> <space>Highligh