Gigabyte GA-X58(A)-UD3/R/P/UD4/UD5/Extreme/UD9/OC Info Thread

[DomagojX]

http://www.bit-tech.net/hardware/mot...board-review/1

ako imaš još koju za oko 90-100eura, aj plizz javi

[JuiceBox]

Je, ali je on stavio EX58 koja dodje 90 eura a ne EX58A.

[-ELF]

slika je drugacija al x58a je maticna... sad sam prico sa likom...

[DomagojX]

onda ako je x58a ud3r, to ti je točno ono za koju sam ti dao link

[-ELF]

decko je u irskoj.. zadnja cena koju mi daje jeste 80€

[jopis]

Na tvom mjestu ja bi to odmah kupio za tako malu lovu, ako je x58a.

[-ELF]

koju bi vi dali ocenu maticnoj.. ja bi mozda nekih 7/10

[blue#13]

ma de ne kenjaj i kupuj,vise nego pristojna ploca za tu lovu,nema sta nema na toj ploci.
kupuj odmah!

[dejanbinladen]

Autor blue#13

ma de ne kenjaj i kupuj,vise nego pristojna ploca za tu lovu,nema sta nema na toj ploci.
kupuj odmah!

[bluefluid]

Autor -ELF

pa to i mislim.. da sa 775 predjem na 1366... da bi se isplatila ova maticna uopste uzimat....

Autor -ELF

a jel ima ko kakav review za nju, dali je dobra/losa...

Autor -ELF

slika je drugacija al x58a je maticna... sad sam prico sa likom...

Autor -ELF

decko je u irskoj.. zadnja cena koju mi daje jeste 80€

Autor -ELF

koju bi vi dali ocenu maticnoj.. ja bi mozda nekih 7/10

Autor blue#13

ma de ne kenjaj i kupuj,vise nego pristojna ploca za tu lovu,nema sta nema na toj ploci.
kupuj odmah!

al sam se odvalio smijati na ovo...


elf, sretno s kupovinom

[-ELF]

Autor bluefluid

al sam se odvalio smijati na ovo...


elf, sretno s kupovinom

zbog ovakvih likova nemozes ni doci do pravog zakljucka...

[Razer]

Prilikom kupnje pripazi koju verziju uzimaš. Postoji GA-EX58A-UD3R rev 1.0 ili rev 2.0. Prva verzija dolazi sa osmerofaznom regulacijom napona, dok druga dolazi, baš kao i UD5, sa dvanaesterofaznom naponskom jedinicom. Inače ploča je pravi best buy po toj cijeni, bilo koju od te dvije revizije upecao, napravio si dobar izbor. Također, ove nove "A" verzije nemaju problema sa baseclock ograničenjem, kako je to bilo kod starije "non-A" verzije ploče.

[dejanbinladen]

obicna ud3r ima cak i tri verzije 1.0-krs, 1.6- fixan pcie preko 102 i jos neke sitnice i u verziji 2.0 rjesno sve ostalo

uglavnom 1.6 i 2.0 su dbore za tu klasu
http://hwbot.org/community/submissio...8_ud3r_227_mhz

[-ELF]

Autor Razer

Prilikom kupnje pripazi koju verziju uzimaš. Postoji GA-EX58A-UD3R rev 1.0 ili rev 2.0. Prva verzija dolazi sa osmerofaznom regulacijom napona, dok druga dolazi, baš kao i UD5, sa dvanaesterofaznom naponskom jedinicom. Inače ploča je pravi best buy po toj cijeni, bilo koju od te dvije revizije upecao, napravio si dobar izbor. Također, ove nove "A" verzije nemaju problema sa baseclock ograničenjem, kako je to bilo kod starije "non-A" verzije ploče.

Fala Razer

[bluefluid]

Evo review i jedne od najtrofejnijih ploca

Gigabyte X58A-UD9 review



Izvor:guru3d

[ThePornstar]

Bome moćno izgleda, ne sumnjam da je i u praksi takva. Ovak na daljinu buni ovaj hladnjak koji ima dva pajpa na vrhu, mislio sam da se radi o bloku za vodeno A i bundle je stvarno hvale vrijedan.

[jopis]

Autor bluefluid

Evo review i jedne od najtrofejnijih ploca

Gigabyte X58A-UD9 review



Izvor:guru3d

Ok, ploča je zmaj, ali nisu li utori za grafe 'malo' preblizu, tj prenabijeni??
Nekako mi je logičniji ovaj raspored gore na sabertooth-u, bez obzira na quad sli mogućnosti ove ud9, koji je upitan zbog gore navedenog problema.

[Matth€w]

Evo isčupo sam jedan SS, davno sam radio review, neznam točno di su mi ostali SS-ovi. Oragnizacija FTW!



Uglavnom, i7 980X ~ 4,4 GHz, 4x5870 (Gigabyte SOC, 2 x Sapphire Vapor-X, Sapphire Eyefinity 6 Edition) onako blago OC-ane, jer mi se nije baš dalo sad svaku pojedinačno poštelavati do maskimuma, poprilično naporan posao kada nisu u pitanju 4 iste grafičke kartice.

[bluefluid]

Uz takav hardver ne moze niti skor biti los

Inace, iako nisam fan gigabyte-a, moram priznati da me ploca zaintrigirala, pogotovo nakon sto sam vidio sto ljudi postizu s njim (link)

Jedna stvar samo koja me zanima - ima li smisla 24 fazna regulacija napona?

[Matth€w]

Da, na HWBotu ima interesantih rezultata s njom. Jedino je šteta što kao prava i nadasve kompetenta X58 ploča sa 2xNF200 čipa nema prekidače za gašenje PCI-e slotova u hodu, poput RIIIE.

Što se tiče 24-fazne regulacije, ona ti nemora biti u punoj upotrebi sa svih 24. To više zamišljeno ovako;

Postoji mod nazvan "Dual Power Switching". Prilikom aktivacije ovog moda, 2 seta od 12 faza snage zajedno surađuju, automatski paleći jedan set od 12 faza te pritom gašeći ostalih 12, dozvoljavajući ovom drugom setu da se „odmore“. Pritom se dobiva puno bolja efikasnost te duži vijek trajanja tih faza.

To može biti uključeno, ali i nemora.

[bluefluid]

RIIIE je po meni fail od ploce totalno, dosta nepromisljenih poteza s tom plocom od strane Asus-a, no dobro, ocito im prodaja nije ispod ocekivanja, a sad jos izbacuju i formulu...

Ok, hvala na pojasnjenju. Znaci sto se tice stabilnosti napona komponenti i nije neka prevelika prednost?

[Wolverine]

Autor ThePornstar

Ovak na daljinu buni ovaj hladnjak koji ima dva pajpa na vrhu, mislio sam da se radi o bloku za vodeno

To i je blok za vodeno.

[Doink the Clown]

Gigabyte Officially Intros X58A-OC Motherboard

GIGABYTE TECHNOLOGY Co., Ltd, a leading manufacturer of motherboards, graphics cards and other computing hardware solutions today announced the launch of the world’s first motherboard designed from the ground up for extreme overclockers, the GIGABYTE GA-X58A-OC. Its overclocking specific performance design defines a whole new category of enthusiast focused motherboards that introduces never-seen-before tweaking and insulating features.

“The GIGABYTE X58A-OC introduces some really exciting and unique overclocking technologies like the PWM frequency switcher, a full range of onboard hardware OC buttons, onboard SATA power connectors for stable multiple graphics configurations, and DualBIOS switcher that up until now have just been ideas discussed in private OC forums and messages,” commented HiCookie, GIGABYTE In-house Overclocking Expert. “Tweaking features aside, we have also adopted high current components such as POScaps and MPFC (Max Power Ferrite Core) Chokes that allow overclockers to bench more reliably and with more power so they are able to smash more world records. As an avid overclocker myself, having the freedom to help design a board specifically for overclockers has been a dream come true, and I really hope that overclockers enjoy benching on this board as much as we enjoyed making it!”

Based on the Intel X58 chipset (Tylersburg) and supporting LGA 1366 socket CPUs such as Intel’s new top of the range Core i7 990X Extreme Edition CPU, the GIGABYTE X58A-OC takes advantage of all the performance benefits that the X58 platform has to offer including triple channel DDR3 memory support, 6 core 12 thread CPU support, and enough PCIe Gen 2.0 bandwidth to support 4-way CrossFireX and 3-way SLI for the best graphics performance in the world.

Designed for Extreme Overclocking
GIGABYTE has listened closely to the overclocking community to make sure the X58A-OC has all of the overclocking features enthusiasts have been asking for, without some of the features that are unnecessary while overclocking, or can negatively impact performance - similar to a stripped down sports car where the aircon, radio, passenger seats, etc… have been removed to reduce weight. Layout was a critical aspect of the design, not only in choice of components used, but also spacing of the components so that insulation of the board is as easy as possible, while still maintaining the most efficient data pathways between the various components. GIGABYTE is also introducing 5 new main overclocking features on the X58A-OC that help to push the performance envelope of the X58A-OC even further including OC-VRM, OC-Touch, OC-PEG, OC-Cool and OC-DualBIOS.

OC-VRM
The GIGABYTE X58A-OC features a new VRM design called OC-VRM, which includes a combination of highly conductive POScaps, 50A rated MPFC (Max Power Ferrite Core) Chokes, and Driver-MOSFETs, which combined, are able to deliver higher current to the CPU, with better efficiency and lower temperature. OC-VRM also allows users to overclock the PWM frequency via an onboard switch, for real-time adjustment. When the CPU needs maximum power, users can raise the PWM frequency in order to deliver more current through this unique POScap and MPFC Choke design. In addition, GIGABYTE has specially chosen unobtrusive components and carefully designed their layout to make it easier and quicker than ever for extreme overclockers to insulate their boards.

OC-Touch
OC-Touch enables overclockers to quickly and easily get the best performance from their system. With onboard OC-Touch buttons, users are able to manually raise and lower the CPU ratio, change BCLK settings, and even change BCLK stepping to either 1MHz or 0.3MHz. These changes can be made at any time whether in the BIOS, DOS, or Windows and in real-time without the need for rebooting, so that users can quickly fine-tune to find their CPU’s maximum frequency. The onboard 4G Ready button allows novice overclockers to automatically reach 4GHz, while advanced users can use it to get to 4GHz before continuing with OC-Touch to quickly find their CPU’s best margin. Onboard voltage measurement modules are also included to help users to conveniently monitor component voltages.

OC-PEG
OC-PEG provides two onboard SATA power connectors for more stable PCIe power when using 3-way and 4-way graphics configurations. Each connector can get power from a different phase of the powersupply, helping to provide a better, more stable graphics overclock. The independent power inputs for the PCIe slots helps to improve even single graphics card overclocking. For 4-way CrossFireX™, users must install OC-PEG to avoid over current in the 24pin ATX connector. The entire board also features POScaps, helping to simplify the insulation process so overclockers can quickly reach subzero readiness.

OC-Cool
OC-Cool features a new LED lit thermal design and 7x 4-pin Smart Fan connectors to allow overclockers to easily control system-wide temperature. The OC-Cool heatpipe maximizes system convection to expel hot air out through the IO panel and optimizes passive cooling. OC-Cool LED lighting on the North and South Bridges further adds to the X58A-OC’s coolness.

OC-DualBIOS
OC-DualBIOS features an onboard BIOS switcher and LED indicator, allowing users to select one BIOS for normal use, and another one for overclocking. It can also act as a backup BIOS in case of BIOS failure during overclocking. With two BIOSes, users are able to save up to 16 different overclocking profiles – a very useful feature when overclockers want to update to a new BIOS, but don’t want to lose their original settings.

By being able to switch between 2 different BIOSes, OC-DualBIOS also allows users to test drive a new BIOS without having to update both BIOSes with the same update, helping to save time and unnecessary BIOS reflashes.

http://www.techpowerup.com/141401/Gi...therboard.html

[lit]

Daj nemojte mi s time, taman sam se istrošio za novi komp kad sad vidi ovo.... tko god si ju kupi uživajte, imat ćete razloga. dizajnerima ove ploče

[Wolverine]

Mogli su komotno DFI LanParty značku gore nakeljit a ne Điđabajt

[Bluzer]

Interesantan dizajn, nema uopće "klasičnih" kondenzatora. Koliko vidim, samo neke tantal perverzije.

Spominje li se igdje cijena? Ovo bi vrijedilo posjedovati samo zbog dizajna lišenog hrpe integriranih gluposti, ne samo zbog besmislenog rušenja rekorda.

[Ivan123]

Cijena je oko 250-280$

[jucca]

Kako flashati BIOS na Gigabyte GA-X58A-UD3R ploči? Nemam floppy, USB flash disk iz QFlasha kaze da ne prepoznaje, iako je formatiran u FAT32. Napravio sam DOS bootabilni USB flash disk, snimim flash utility i BIN fajl, podigne flash, ali kaze da nije podrzane sa USB-a?
Nemam instalirane windowse.

[jucca]

Rijeseno sa drugim starijim stickom. S ovim od 8gb nece dok sa 256mb radi

[jucca]

Evo mene dalje sa problemima, koje sam mislio da ce rijesiti update BIOSa
Dakle, ploca odjednom nece da posta kad su diskovi u AHCI modu. SSD na kojem se sistem, uredno radi na drugom racunalu takodjeru AHCI modu. Recimo da 8 od 10 puta zapne. Dalje, u IDE modu povremeno ne prolazi onaj DMI pool ili kako se vec zove.
Samo reset BIOSa, istekavanje svih driveova, pa ponovno ustekavanje jedan po jedan, i onda uspije dignit sistem. Nakon par reseta, sve po starom, zapne bilo u IDE ili AHCI modu. Dalje, po nekim savjetima, wipe-ao sam SSD i ostale diskove, ali bez pomaka.
Ovdje >> http://forums.bit-tech.net/showthread.php?t=199673 << se takodjer spominje ovaj problem, samo sta je moja ploca rev.1
Odnio sam je na servis, ali mi je covjek odmah rekao da nema sanse da prodje pod reklamaciju.
Ima li tko ideju sta napraviti?
Testiramo sam memoriju, diskove, sve prolazi kako treba

EDIT: molim moda da preimenuje temu u Gigabyte X58A-UD3R problemi sa AHCI/IDE modom
EDIT2: probao sam mjenjati SATA kabele, i promijeniti port, uvijek isto, sa SSD ne prolazi post