TechPowerUp GPU-Z

[cccp]

Sad sam skužio da je to thread iz 2008., ali isto se traži najmanji score u 3DMarku 03.

http://hardforum.com/showthread.php?t=1279956

Sve to što imaš underclockaj i u pozadinu stavi da vrti Prime95 ili nešto slično.

[Ivo_Strojnica]

nema underclockanja, piše da mora biti na stocku.
Uvik postoji softverski način rješavanja problema.
Blaženi programeri

[Šole]

Evo službeni thread

[De5tr0yer]

Autor Ivo_Strojnica

nema underclockanja, piše da mora biti na stocku.
Uvik postoji softverski način rješavanja problema.
Blaženi programeri

Ma kako nema underclockanja. Piše lijepo u threadu da je sve dopušteno osim brčkanja sa rezultatima...

[Ivo_Strojnica]

ma budala sam krivo pročita, default settings at 3D mark. ja sam mislija na sam hardver. Dogodi se...

Obratiti pozornost da su sve vrste prijenosnih računala zabranjene

[Baja 001]

Kako stojite s rezultatima? Sutra slažen Celer 700 + 128 MB SDRAMa + FX5200. Naravno HW modifikacije će bit, ovisno o skoru. Da iden na W7?

_________________________

1. The giveaway starts September 01, 2011 and ends September 31, 2011 (1 month).
2. Prizes will be given away in the week of October 1st.
3. This contest is open to participants from all countries.
4. All desktop systems are welcome to submit their entry (no notebooks, netboooks, tablets or other such portable systems).
5. You must run 3DMark on the physical hardware (not inside VMware or similar).
6. All cards are welcome and eligible to win, not only PowerColor.
7. Anyone, any age can enter where legal.
8. The winner of the first prize will be determined by the lowest total score in Futuremark 3DMark03 default. Should multiple participants have the same score, one will be randomly chosen.
9. The second prize will be chosen at random from all contest submissions, no matter the 3DMark03 score. A valid score is required.
10. Your graphics card must support and complete the 3DMark03 Nature test.
11. The score link in Futuremark must be active when the competition ends, during the competition you can leave it inactive if you don’t wish others to see your score.
12. Submissions must have numeric result values on ORB for all the following fields: "3DMark Score", "GT1 - Wings of Fury", "GT2 - Battle of Proxycon", "GT3 - Troll's Lair", "GT4 - Mother Nature". Submissions without numbers are still valid for the 2nd prize random draw.
13. Submissions are valid with both Futuremark approved drivers and not approved drivers.
14. The benchmark must have been made during the competition period and must have "PowerColor PIMP MY RIG 2011" in the title (for registered users).
15. Entry into to giveaway is only possible by running 3DMark03, uploading the score and submitting the score info using GPU-Z on the tab "PowerColor Giveaway".
16. If a winner can not be contacted after 5 days another winner will be chosen at random.
17. You will not receive any communication to your submitted E-Mail address other than a winning notification in case you win.
18. Winner will not be responsible for shipping fees.
19. TechPowerUp or PowerColor shall not accept any responsibility for any damage, loss, injury or disappointment suffered by you or any other participant entering the Competition or as a result of accepting any prize. TechPowerUp or PowerColor are not responsible for any problems or technical malfunction of any telecommunications network or lines, computer on-line systems, servers, or providers, computer equipment, software failure of
    any email or entry to be received on account of technical problems or traffic congestion on the Internet, telephone lines or at any web site, or any combination thereof, including any injury or damage to your or any other person's computer or mobile telephone related to or resulting from participation or downloading any materials in the competition. TechPowerUp and PowerColor also reserve the right to change or amend the rules if necessary.

If you have additional questions, we have created a discussion thread for this giveaway.

[Baja 001]

Moran se bumpat. Inicijalni setup je otpa. Celer ploča nema AGP , tako da san server rastavio stavio P4 willya na 1.2 downclock (67MHz FSB najniže), 128MB RAMa 133MHz (~90MHz), IDE 40GB disk, FX5200 256MB. E sada 3DMark s genric MS driverima je izbacio 1000 bodova ravno

Nakon toga san stavio RivaTuner downclocka ~75Mhz za CORE i RAM odokativno, FurMark u pozadini....

Loada mi je tek prvi test ~3min , uglavnom iman osjećaja da bi moga ~20 Marka dobit , jet na GT1 ~1 FPS prosjek, kasnije samo teže ide

Update ide kasnije, ako završi



Sutra dolazi mobilni Athlon i SDRAM.

[E-mil]

Tamo negdje, po forumimna, su se hvalili rezultatom od 6 marks bodova.

[NinX]

Sutra se onda i ja bacam u to, imam neki sempron i ploču s intergrirkom

[De5tr0yer]

Ja nikak da ulovim vremena za ovo, mašina stoji sa strane složena al nažalost vremena malo. Nadam se do kraja rujna nešto vremena ulovit, podijelite reze s nama

[Baja 001]

Autor E-mil

Tamo negdje, po forumimna, su se hvalili rezultatom od 6 marks bodova.

Mislim da je 4 sada, koliko san uspio proletit....

Autor NinX

Sutra se onda i ja bacam u to, imam neki sempron i ploču s intergrirkom

DirectX9 must have, sada ako je neka nforce 630 mislin da će pasat.

Autor De5tr0yer

Ja nikak da ulovim vremena za ovo, mašina stoji sa strane složena al nažalost vremena malo. Nadam se do kraja rujna nešto vremena ulovit, podijelite reze s nama

Ajde da i mi pokažemo zube. Sutra jedva čekam Bartona i SDRAM

Koliko teško bilo postić WR ovo je vjerovatno isto teško.

S prijašnjim clockovima 98 bodova. Sada san upalio Prime95, ATITool 50/65 MHz, test, i derem 3DMark. O zasad FPSa i mislin da sada ima progresa.
GT1 test, 0:46 > 30 FPSa

EDIT:

Razer i ekipa koji ste vičniji Rivi ima li kakvih šema da sjeben grafiku šta bolje. Ispod 66MHz za RAM se ruši, a Core je ~50MHz zadnje stabilan. Kako pipeline isključit i sl?

[De5tr0yer]

U rivatuneru imaš pod advanced options softversku mogućnost o(ne)mogućavanja pajpova, ali ne radi na svim grafama. BIOSi drugih grafa nisu dozvoljeni, iako ne piše striktno, sumnjam da bi ti priznali npr 6600 pod 6200

[Baja 001]

Autor De5tr0yer

U rivatuneru imaš pod advanced options softversku mogućnost o(ne)mogućavanja pajpova, ali ne radi na svim grafama. BIOSi drugih grafa nisu dozvoljeni, iako ne piše striktno, sumnjam da bi ti priznali npr 6600 pod 6200

Sve je dopušteno osim manipuliranja .exe od 3DM i raznim hexovima za skor. Driveri, sve ostalo je dopušteno....

[Bubba]

Ne znam jesu li mijenjali pravila u medjuvremenu, ali najnizi score koji mozete postici je 130, obzirom da rezultati svih 4 testova moraju biti >1 kako bi se ispravno prikazali u ORB-u...

Taj rezultat je postiglo nekoliko frajera vec prije tjedna dana. Ima thread na njihovom forumu.

[Baja 001]

http://www.techpowerup.com/forums/sh...8&postcount=94
http://www.techpowerup.com/forums/sh...9&postcount=96

Izgleda, nisan ni gleda ORB. Je li ima nekakv frame rate fixer, ono da je grafika jaka za 50FPSa ali blokira DX or whatever da bude točno 1FPS.

Each of four game tests generates a frame-rate (in frames per second) that is used to calculate the overall
score. The formula for calculating the overall 3DMark03 score is:
3DMark03 score = (Game Test 1 frame-rate x 7.3) +
(Game Test 2 frame-rate x 37) +
(Game Test 3 frame-rate x 47.1) +
(Game Test 4 frame-rate x 38.7)

130,1 je najmanje po ovome...

[Doink the Clown]

TechPowerUp released a new version of GPU-Z, version 0.5.6. GPU-Z is our popular graphics card information and diagnostic utility that gives you technical details of the graphics hardware installed in your PC, and lets you monitor fine details such as clock speeds, temperatures, and voltages. The new version adds preliminary support for some of NVIDIA's upcoming GeForce Kepler family GPUs. It also adds support for NVIDIA GeForce GTX 560 Ti 448 CUDA cores, which will be launched this 29th. Support is also added for AMD Radeon HD 6320, FirePro V9800, FirePro V4900, GeForce GTX 460 V2 (GTX 460 based on GF114), Quadro NVS 420, Quadro NVS 450, and Quadro FX 380 LP. A small bug related to incorrect shader reading on "Blackcomb" is fixed.

DOWNLOAD: TechPowerUp GPU-Z 0.5.6 | GPU-Z 0.5.6 ASUS ROG Edition

[Vrbaa''']

Koristim ASUS GPU Tweak za OC graficke kartice, u njemu se sadrzi ASUS-ov GPU-Z.
Evo nabacit cu jedan screenshot, pa ako neko zeli moze pogledati ovdje: http://i41.tinypic.com/2vii0du.png

LP!

[Doink the Clown]

TechPowerUp today released the latest version of GPU-Z, our popular video subsystem information and diagnostic utility that provides you with accurate information about the graphics hardware installed, and lets you monitor their clock speeds, fan speeds, voltages, VRAM consumption, etc., in real-time. Version 0.5.8 introduces two new features. The first one is a render test that applies sufficient load (not stress) on the GPU to pull it out of PCI-Express link-state power-management, to ensure the Bus information is accurate. If you find the PCI-Express bus link speed or PCIe version displayed incorrectly, simply click on the "?" button next to the field to launch the load test.

The next new feature is ASIC quality, designed for NVIDIA Fermi (GF10x and GF11x GPUs) and AMD Southern Islands (HD 7800 series and above), aimed at advanced users, hardware manufacturers, and the likes. We've found the ways in which AMD and NVIDIA segregate their freshly-made GPU ASICs based on the electrical leakages the chips produce (to increase yield by allotting them in different SKUs and performance bins), and we've found ways in which ASIC quality can be quantified and displayed. Find this feature in the context menu of GPU-Z. We're working on implementing this feature on older AMD Radeon GPUs.

DOWNLOAD: TechPowerUp GPU-Z 0.5.8, TechPowerUp GPU-Z 0.5.8 ASUS ROG Themed

The full change-log follows.

• Added explanation about PCI-Express power savings and 3D render test to accurately measure bus config under load
• Added function to display ASIC quality for Fermi and Southern Islands. (Located in the GPU-Z system menu)
• Fixed crash on older ATI cards
• Added voltage monitoring for HD 7970
• Improved real-time clock monitoring for HD 7970
• Fixed OpenCL detection for AMD Antilles, Whistler, Seymour, Blackcomb
• Improved default clock reading for AMD HD 7970 and Fusion
• Added support for AMD FirePro V7900, HD 6930, HD 7690M, HD 6410D
• Fixed Intel Sandy Bridge IGP to be DirectX 10.1, 32 nm
• Added support for NVIDIA Tesla C2075, GeForce GT 630M

http://www.techpowerup.com/159098/Te...-Released.html

[Doink the Clown]

TechPowerUp today announced GPU-Z 0.6.1, and with it, a new graphics card giveaway in partnership with PowerColor, in which you could win some of the fastest and coolest Radeon HD 7000 series graphics cards in the industry. Version 0.6.1 of GPU-Z adds support for some new GPUs on the horizon, such as NVIDIA GeForce GTX 690, GeForce GTX 670, GeForce GT 640 (desktop), GeForce GT 630, GeForce 605, GeForce GTX 675M (mobile), and GeForce GTX 670M; AMD Radeon HD 7970M (mobile), and Radeon HD 7450 (desktop); Intel HD 4000 and HD 2500 "Ivy Bridge". GPU-Z 0.6.1 improves NVIDIA GPU Boost clock speed detection. A host of other stability and reliability changes were made (refer to the change-log below).

With GPU-Z 0.6.1, TechPowerUp is teaming up with PowerColor to present to you this year's first GPU-Z Giveaway, in which you could win some great graphics hardware. Up for grabs are PowerColor HD 7970 PCS+ Vortex II, PowerColor HD 7870 PCS+ Vortex II, and the yet-unannounced PowerColor HD 7770 PCS+ Vortex II. To participate in the Giveaway, simply run GPU-Z 0.6.1 (main version), click on the "PowerColor Giveaway" tab, and follow the instructions. Entries are open till June 01, 2012; multiple entries may lead to elimination. Good Luck!

DOWNLOAD: TechPowerUp GPU-Z 0.6.1 | TechPowerUp GPU-Z 0.6.1 ASUS ROG Edition

The complete change-log follows.

• Added PowerColor giveaway
• Added support for NVIDIA GeForce GTX 690, GTX 670, GT 640, GT 630, GeForce 605, Quadro 3000M, GTX 675M, GTX 670M
• Added support for AMD Radeon HD 7970M, HD 7450
• Added full support for Intel Sandy Bridge and Ivy Bridge integrated graphics
• Fixed ROP count on GK107
• Improved NVIDIA Kepler Boost Clock detection
• Fixed crash on AMD Southern Islands when no graphics card driver installed
• Fixed installer not working properly on Windows XP
• Disabled broken BIOS save on NVIDIA Kepler
• BIOS files are saved as .rom now
• Fixed sensor graph redraw and improved its performance

http://www.techpowerup.com/165298/Te...-Giveaway.html

[sapunko_HR]

TechPowerUp GPU-Z v0.6.4

1. Changed sort order of devices to put devices with connected monitor first
2. Fixed memory size reading for NVIDIA cards with 4 GB or more
3. Fixed AMD Trinity Fusion clock readings
4. Added support for NVIDIA GeForce GTX 660 Ti, GTX 660, GTX 650, GT 610, GTX 680M
5. Added support for AMD FirePro 2270
6. Fixed ROP and TMU count for Intel GMA 3600
7. Changed sensor label from "VReg Temperature" to "VRM Temperature"
8. Fix for sensors displaying Fahrenheit not being saved properly
9. Added VRM temperature monitoring for CHL8228 based cards
10. Fix for various crashes

Napokon dodali VRM temperature za hd 7950

[ExtremePower]

TechPowerUp GPU-Z v0.6.5

[zagy1984]

TechPowerUp GPU-Z v0.6.8

[matxoxo]

Super program za gledanje taktova graficke kao i za klokanje ili ako flashate bios super i za spremanje "tvornickog" biosa

[Cuky]

Nemoj batje?
Malo postove nabijamo, a?