Mislim da sam uspio. Orthos je radio nesto vise od 2 i pol sata na BLEND bez ikakvih pogreski, to znaci da bi sad trebalo biti stabilno. Ili ne, kaj vi mislite?
Sad cu za sve napisati kako sam to uspio ustabiliti. Radi se o memoriji Corsair Twinx2x4096-8500c5d na ploci Asus P5K-E WIFI (1013 bios verzija).
Otisao sam u bios i odabrao LOAD BIOS DEFAULTS te sacuvao postavke i ponovno usao u bios. Na sljedecim postavkama biosa memorija je radila stabilno u Orthosu vise od 2 i pol sata.
CPU Ratio Setting = 10
C1E Support = Disabled
Max CPUID Value Limit = Disabled
CPU TM Function = Disabled
Execute Disable Bit = Enabled
Ai Overclock Tuner = Manual
CPU Ratio Setting = 10
FSB Strap To North Bridge = Auto
FSB Frequency = 320
PCIE Frequency = 100
DRAM Frequency = 1067
DRAM Command Rate = 2N (nemam ponudjeno T, nego N...koja je razlika?)
DRAM Timing Control = 5-5-5-15, ostalo na AUTO
DRAM Static Read Control = Disabled
Transaction Control = Auto
CPU Voltage = 1.5000V
CPU PLL Voltage = 1.50V
FSB Termination Voltage = 1.40V
DRAM Voltage = 2.25V
NB Voltage = 1.55V
SB Voltage = 1.05V
Clock Over-Charging Voltage = 0.70V
Load-Line Calibration = Enabled
CPU GTL Voltage Reference = Auto
NB GTL Voltage Reference = Auto
CPU Spread Spectrum = Disabled
PCIE Spread Spectrum = Disabled
Nadam se bude ovo nekome pomoglo. Meni, kazem, zasad radi stabilno. Ako ima tko kaj za dodati na ove postavke, slobodno.