@mamutarka
Kako nema ?
8.4 Reset to Factory Defaults
Warning
A reset to factory default settings deletes all configuration changes you made. Therefore, after the reset, a reconfiguration of your Thomson Gateway will be needed.
Also your WLAN clients will have to be re-associated, as described in “4 Wireless” on page 21.
Software Reset
Proceed as follows:
1 Browse to the Thomson Gateway Web Interface.
2 On the Thomson Gateway menu, click Configuration.
3 In the Pick a task list, click Reset my Thomson Gateway to default settings.
4 The Thomson Gateway restores the initial configuration and restarts.
5 The Thomson Gateway returns to the Thomson Gateway home page (unless the IP address of your computer is not in the same subnet as the default IP address of the Thomson Gateway, being 192.168.1.254). T-Koma verzija je na 192.168.1.1.
Hardware Reset
Proceed as follows:
1 Make sure the Thomson Gateway is turned on.
2 Use a pen or an unfolded paperclip to push the recessed Reset button. Push it until the Power LED lights red - this will take about 7 seconds.
3 Release the Reset button.
4 The Thomson Gateway restarts.
Neće da se javi, jedino ako imaš onaj prevedeni i skraćeni manual.