xfr1 je rokao 1950X na 2 jezgre sa 1.5~1.55V za 4.1~4.2, znaci da je ovo cak i poboljsanje.
Nerealno je ocekivati ista bolje od malo ispeglanog 14nm lp procesa(12nm), prakticki je ist k ko i 14nm, jbg lp je lp i nije zamisljen/napravljen da dobro skalira sa visokom voltazom.
Svih 8 jezgri na ~4.4 GHz zaboraviti kod vecine proceva, osim ak nekoga zdrma lutrija
Citiraj:
good morning
Yesterday after the tests I discovered why the pc crashed
The corsair h90 pump was at minimum speed
This morning I'm re-testing now I can stay stable at 4250mhz to the core
with 1.38v
An excellent result for my expectations
With a custom heatsink, I think 4300-4350mhz (all core) is possible (silicon lottery)
In default (4350-4375mhz) voltages are over 1.5v, I do not like to use too much voltage
Also consider that the gigabyte bios for this cpu does not exist
With new bios, with 3600mhz ram support and over , we will have incredible boost.
My ram is 3200 c14 but can also go to 3600 c14.14.14 without problems
To be correct ,I'm not under NDA, I have not signed anything, so I can do what I want
voglio
|
Info je od Ashrafa Easse, a on ga je uzeo sa overcl uk