PC Ekspert Forum - View Single Post - Hlađenje nf4Ultra na DFI NF4 LP Ultra-D

Wolverine · 02.04.2006., 22:21

Joj ljudi ja ću se upucat!
Evo kako ispadne modanje VF700Cu u Australiji!

Lik je kao to radio gledajuć moj post i moje slike....no problem je kaj je lik vjerojatno gledal te slike sa bar 5 promila u krvi jer ovo nije niti slično mojem mod-u

P.S. ploče su iste (obe Ultra-D)

Evo copy paste

I put on the Zalman VF-700cu vga heatsink on my nf4 Ultra-D as showen in this previous thread.
http://www.dfi-street.com/forum/sho...29&page=1&pp=15

I did this to get lower temps. My stock cooler had a buzzing noise that eventually went away. It fits under a 7800gtx in the 16x slot but needs some of the back fins chopped off and filed down as low as the stock cooler. The front fins need to be bent around the usb, sata and some capacitors. They could be filed back underneath until they clear everything without bending them.

I used AS5 TIM but after putting the heatsink on I rebuilt into a different case that has a side panel fan so I cant tell how much temperature has dropped. I think about 5c atleast. With the side fan turned on chipset temp has been down to 38c which is 10c lower than my previous lowest temps with the old case/heatsink.

Here are pictures, all about 900kb each.

http://img458.imageshack.us/img458/9...inplace5mr.jpg

The Zalman sitting in place without screws. This is when I had finished bending the fins away from the usb's etc.

http://img72.imageshack.us/img72/2830/finished3gq.jpg

The finished heatsink. The videocard goes across the lowest part that I filed back. The fins in the middle did not need cutting as much as I have done.

http://img74.imageshack.us/img74/614/78006yx.jpg

With 7800gtx in 16x slot. This is before I finished bending the fins.

http://img56.imageshack.us/img56/760/7800back8eq.jpg

The back of the 7800

http://img56.imageshack.us/img56/760/7800back8eq.jpg

http://img490.imageshack.us/img490/8...orechop6qv.jpg

Before I bent and chopped it.

E to je fakat kak bi Jelc reko KOVAČIJA!

02.04.2006., 22:21	#26
Wolverine Moderator Moj komp Datum registracije: Apr 2005 Lokacija: Vancouver, BC // Zabreg, Maximir Postovi: 12,410	Joj ljudi ja ću se upucat! Evo kako ispadne modanje VF700Cu u Australiji! Lik je kao to radio gledajuć moj post i moje slike....no problem je kaj je lik vjerojatno gledal te slike sa bar 5 promila u krvi jer ovo nije niti slično mojem mod-u P.S. ploče su iste (obe Ultra-D) Evo copy paste I put on the Zalman VF-700cu vga heatsink on my nf4 Ultra-D as showen in this previous thread. http://www.dfi-street.com/forum/sho...29&page=1&pp=15 I did this to get lower temps. My stock cooler had a buzzing noise that eventually went away. It fits under a 7800gtx in the 16x slot but needs some of the back fins chopped off and filed down as low as the stock cooler. The front fins need to be bent around the usb, sata and some capacitors. They could be filed back underneath until they clear everything without bending them. I used AS5 TIM but after putting the heatsink on I rebuilt into a different case that has a side panel fan so I cant tell how much temperature has dropped. I think about 5c atleast. With the side fan turned on chipset temp has been down to 38c which is 10c lower than my previous lowest temps with the old case/heatsink. Here are pictures, all about 900kb each. http://img458.imageshack.us/img458/9...inplace5mr.jpg The Zalman sitting in place without screws. This is when I had finished bending the fins away from the usb's etc. http://img72.imageshack.us/img72/2830/finished3gq.jpg The finished heatsink. The videocard goes across the lowest part that I filed back. The fins in the middle did not need cutting as much as I have done. http://img74.imageshack.us/img74/614/78006yx.jpg With 7800gtx in 16x slot. This is before I finished bending the fins. http://img56.imageshack.us/img56/760/7800back8eq.jpg The back of the 7800 http://img56.imageshack.us/img56/760/7800back8eq.jpg http://img490.imageshack.us/img490/8...orechop6qv.jpg Before I bent and chopped it. E to je fakat kak bi Jelc reko KOVAČIJA! __________________ ''Of all the things I've lost I miss my mind the most'' Mark Twain Zadnje izmijenjeno od: Wolverine. 02.04.2006. u 23:10.