spojio novog zyxela na ttl adapter, ovo je output. s time da nemam pojma kako uć u neki config
Code:
----
BTL1
V1.1
CPUI
L1CI
PMCI
PMCS
AFEL
PWRZ
MEML
PMCD
CPUI
L1CI
ZBSS
CODE
DATA
L12F
MAIN
OTP?
MFGZ
OTPP
USBT
SNAN
PASS
----
HELO
CPUI
L1CI
4.1602A-1.0.38-116.140
PMCI
PMCM
DRAM
----
PHYS
PHYE
DDR1
400H
SIZ4
LMBE
RACE
PASS
----
ZBSS
CODE
DATA
L12F
MAIN
NDCK
FPS0
BT02
0001
BT03
0480
NAN3
RFS2
NAN5
Base: 4.16_05
CFE version 1.0.38-118.3 for BCM963381 (32bit,SP,BE)
Build Date: 03/13/2017 (zt02232@tina)
Copyright (C) 2000-2015 Broadcom Corporation.
Boot Strap Register: 0xfffeff
Chip ID: BCM63381B0, MIPS: 600MHz, DDR: 400MHz, Bus: 300MHz
Main Thread: TP0
Total Memory: 134217728 bytes (128MB)
Boot Address: 0xb8000000
SPI NAND flash device: GigaDevice GD5F1GQ4UB, id 0xc8d1 block 128KB size 131072KB
pmc_init:PMC using DQM mode
spi_nand_read_buf(): Attempt to read bad nand block 0x3c8
spi_nand_read_buf(): Attempt to read bad nand block 0x3c9
spi_nand_read_buf(): Attempt to read bad nand block 0x3ca
spi_nand_read_buf(): Attempt to read bad nand block 0x3cb
spi_nand_read_buf(): Attempt to read bad nand block 0x3cc
spi_nand_read_buf(): Attempt to read bad nand block 0x3cd
spi_nand_read_buf(): Attempt to read bad nand block 0x3ce
spi_nand_read_buf(): Attempt to read bad nand block 0x3cf
spi_nand_read_buf(): Attempt to read bad nand block 0x3d0
spi_nand_read_buf(): Attempt to read bad nand block 0x3d1
spi_nand_read_buf(): Attempt to read bad nand block 0x3d2
spi_nand_read_buf(): Attempt to read bad nand block 0x3d3
spi_nand_read_buf(): Attempt to read bad nand block 0x3d4
spi_nand_read_buf(): Attempt to read bad nand block 0x3d5
spi_nand_read_buf(): Attempt to read bad nand block 0x3d6
spi_nand_read_buf(): Attempt to read bad nand block 0x3d7
spi_nand_read_buf(): Attempt to read bad nand block 0x3d8
spi_nand_read_buf(): Attempt to read bad nand block 0x3d9
spi_nand_read_buf(): Attempt to read bad nand block 0x3da
spi_nand_read_buf(): Attempt to read bad nand block 0x3db
spi_nand_read_buf(): Attempt to read bad nand block 0x3de
spi_nand_read_buf(): Attempt to read bad nand block 0x3e0
spi_nand_read_buf(): Attempt to read bad nand block 0x3e1
spi_nand_read_buf(): Attempt to read bad nand block 0x3e3
spi_nand_read_buf(): Attempt to read bad nand block 0x3e5
spi_nand_read_buf(): Attempt to read bad nand block 0x3e7
spi_nand_read_buf(): Attempt to read bad nand block 0x3c8
spi_nand_read_buf(): Attempt to read bad nand block 0x3c9
spi_nand_read_buf(): Attempt to read bad nand block 0x3ca
spi_nand_read_buf(): Attempt to read bad nand block 0x3cb
spi_nand_read_buf(): Attempt to read bad nand block 0x3cc
spi_nand_read_buf(): Attempt to read bad nand block 0x3cd
spi_nand_read_buf(): Attempt to read bad nand block 0x3ce
spi_nand_read_buf(): Attempt to read bad nand block 0x3cf
spi_nand_read_buf(): Attempt to read bad nand block 0x3d0
spi_nand_read_buf(): Attempt to read bad nand block 0x3d1
spi_nand_read_buf(): Attempt to read bad nand block 0x3d2
spi_nand_read_buf(): Attempt to read bad nand block 0x3d3
spi_nand_read_buf(): Attempt to read bad nand block 0x3d4
spi_nand_read_buf(): Attempt to read bad nand block 0x3d5
spi_nand_read_buf(): Attempt to read bad nand block 0x3d6
spi_nand_read_buf(): Attempt to read bad nand block 0x3d7
spi_nand_read_buf(): Attempt to read bad nand block 0x3d8
spi_nand_read_buf(): Attempt to read bad nand block 0x3d9
spi_nand_read_buf(): Attempt to read bad nand block 0x3da
spi_nand_read_buf(): Attempt to read bad nand block 0x3db
spi_nand_read_buf(): Attempt to read bad nand block 0x3de
spi_nand_read_buf(): Attempt to read bad nand block 0x3e0
spi_nand_read_buf(): Attempt to read bad nand block 0x3e1
spi_nand_read_buf(): Attempt to read bad nand block 0x3e3
spi_nand_read_buf(): Attempt to read bad nand block 0x3e5
spi_nand_read_buf(): Attempt to read bad nand block 0x3e7
illegal rom_param(5c54ceb2), ignore it
spi_nand_read_buf(): Attempt to read bad nand block 0x3c8
spi_nand_read_buf(): Attempt to read bad nand block 0x3c9
spi_nand_read_buf(): Attempt to read bad nand block 0x3ca
spi_nand_read_buf(): Attempt to read bad nand block 0x3cb
spi_nand_read_buf(): Attempt to read bad nand block 0x3cc
spi_nand_read_buf(): Attempt to read bad nand block 0x3cd
spi_nand_read_buf(): Attempt to read bad nand block 0x3ce
spi_nand_read_buf(): Attempt to read bad nand block 0x3cf
spi_nand_read_buf(): Attempt to read bad nand block 0x3d0
spi_nand_read_buf(): Attempt to read bad nand block 0x3d1
spi_nand_read_buf(): Attempt to read bad nand block 0x3d2
spi_nand_read_buf(): Attempt to read bad nand block 0x3d3
spi_nand_read_buf(): Attempt to read bad nand block 0x3d4
spi_nand_read_buf(): Attempt to read bad nand block 0x3d5
spi_nand_read_buf(): Attempt to read bad nand block 0x3d6
spi_nand_read_buf(): Attempt to read bad nand block 0x3d7
spi_nand_read_buf(): Attempt to read bad nand block 0x3d8
spi_nand_read_buf(): Attempt to read bad nand block 0x3d9
spi_nand_read_buf(): Attempt to read bad nand block 0x3da
spi_nand_read_buf(): Attempt to read bad nand block 0x3db
spi_nand_read_buf(): Attempt to read bad nand block 0x3de
spi_nand_read_buf(): Attempt to read bad nand block 0x3e0
spi_nand_read_buf(): Attempt to read bad nand block 0x3e1
spi_nand_read_buf(): Attempt to read bad nand block 0x3e3
spi_nand_read_buf(): Attempt to read bad nand block 0x3e5
spi_nand_read_buf(): Attempt to read bad nand block 0x3e7
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.33
Gateway IP address :
Run from flash/host/tftp (f/h/c) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Default host ramdisk file name :
Default ramdisk store address :
Board Id (0-12) : 963381_VMG5313B
Number of MAC Addresses (1-32) : 12
Base MAC Address : izbrisano
PSI Size (1-128) KBytes : 64
Enable Backup PSI [0|1] : 0
System Log Size (0-256) KBytes : 0
Auxillary File System Size Percent: 0
Main Thread Number [0|1] : 0
WLan Feature : 0x00
Voice Board Configuration (0-1) : LE9642_ZSI_BB
Partition 1 Size (MB) :
Partition 2 Size (MB) :
Partition 3 Size (MB) :
Partition 4 Size (MB) (Data) : 4MB
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Multiboot client version: 1.3
Hit any key to stop autoboot:000
Booting from latest image (address 0xbbc00000, flash offset 0x03c00000) ...
Decompression LZMA Image OK!
Entry at 0x8042b240
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
0 buffers found
Closing DMA Channels
Starting program at 0x8042b240
Linux version 3.4.11 (mike@jason-Veriton-M4630G) (gcc version 4.6.2 (OpenWrt GCC 4.6.2 unknown) ) #2 SMP PREEMPT Mon Nov 27 11:43:12 CST 2017
963381_VMG5313B prom init
CPU revision is: 0002a081 (Broadcom BMIPS4350)
DSL SDRAM reserved: 0x132000
Determined physical RAM map:
memory: 07ece000 @ 00000000 (usable)
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00007ece
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000000 -> 0x00007ece
On node 0 totalpages: 32462
free_area_init_node: node 0, pgdat 8053f400, node_mem_map 81000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 222 pages used for memmap
Normal zone: 28144 pages, LIFO batch:7
PERCPU: Embedded 7 pages/cpu @81103000 s5088 r8192 d15392 u32768
pcpu-alloc: s5088 r8192 d15392 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32208
Kernel command line: ro noinitrd irqaffinity=0
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
Memory: 122820k/129848k available (4262k kernel code, 7028k reserved, 1049k data, 220k init, 0k highmem)
Preemptible hierarchical RCU implementation.
NR_IRQS:128
console [ttyS0] enabled
Allocating memory for DSP module core and initialization code
Allocated DSP module memory - CORE=0x0 SIZE=0, INIT=0x0 SIZE=0
Calibrating delay loop... 598.01 BogoMIPS (lpj=299008)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
--Kernel Config--
SMP=1
PREEMPT=1
DEBUG_SPINLOCK=0
DEBUG_MUTEXES=0
Broadcom Logger v0.1 Nov 27 2017 11:27:21
CPU revision is: 0002a081 (Broadcom BMIPS4350)
Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
Brought up 2 CPUs
NET: Registered protocol family 16
pmc_init:PMC using DQM mode
registering PCI controller with io_map_base unset
GetRCalSetting:res_ext value 0x3ff is saturated!
bcm63xx_pcie: applying serdes parameters
registering PCI controller with io_map_base unset
bio: create slab at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x10600000-0x106fffff]
pci_bus 0000:00: root bus resource [io 0x11700000-0x1170ffff]
pci 0000:00:09.0: [14e4:6300] type 00 class 0x0c0310
pci 0000:00:09.0: reg 10: [mem 0x1000c400-0x1000c4ff]
pci 0000:00:0a.0: [14e4:6300] type 00 class 0x0c0320
pci 0000:00:0a.0: reg 10: [mem 0x1000c300-0x1000c3ff]
PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [mem 0xa0000000-0xbfffffff]
pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
pci 0000:01:00.0: [14e4:6338] type 01 class 0x060400
pci 0000:01:00.0: PME# supported from D0 D3hot
pci 0000:02:00.0: [14e4:a8db] type 00 class 0x028000
pci 0000:02:00.0: reg 10: [mem 0x00000000-0x00007fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:01:00.0: Checking PCIe ASPM for vendor 14e4 device a8db
pci 0000:01:00.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0xa0000000-0xa0007fff 64bit]
pci 0000:01:00.0: PCI bridge to [bus 02-02]
pci 0000:01:00.0: bridge window [mem 0xa0000000-0xa00fffff]
PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
bcmhs_spi bcmhs_spi.1: master is unqueued, this is deprecated
skb_free_task created successfully
gbpm_do_work scheduled
BLOG v3.0 Initialized
BLOG Rule v1.0 Initialized
Broadcom IQoS v0.1 Nov 27 2017 11:30:13 initialized
Broadcom GBPM v0.1 Nov 27 2017 11:30:13 initialized
NET: Registered protocol family 8
NET: Registered protocol family 20
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 128 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
NET: Registered protocol family 1
PCI: CLS 16 bytes, default 16
init_bcm_tstamp: unhandled mips_hpt_freq=300000000, adjust constants in bcm_tstamp.c
bcm_tstamp initialized, (hpt_freq=300000000 2us_div=300 2ns_mult=0 2ns_shift=0)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.18)
msgmni has been set to 239
io scheduler noop registered (default)
SPI NAND Device Linux Registration
SPI NAND Linux Registration
SPI NAND device reset
SPI NAND device GigaDevice GD5F1GQ4UB
device id = 0xc8d1
page size = 0x800 (2048) bytes
block size = 0x20000 (131072) bytes
total blocks = 0x400 (1024)
total size = 0x8000000 (134217728) bytes
NAND device: Manufacturer ID: 0xc8, Chip ID: 0xd1 (Gigadevice NAND 128MiB 3,3V 8-bit)
NAND_ECC_NONE selected by board driver. This is not recommended!
Bad Block 0x300 found (address 0x6000000)
Bad Block 0x3c8 found (address 0x7900000)
Bad Block 0x3c9 found (address 0x7920000)
Bad Block 0x3ca found (address 0x7940000)
Bad Block 0x3cb found (address 0x7960000)
Bad Block 0x3cc found (address 0x7980000)
Bad Block 0x3cd found (address 0x79a0000)
Bad Block 0x3ce found (address 0x79c0000)
Bad Block 0x3cf found (address 0x79e0000)
Bad Block 0x3d0 found (address 0x7a00000)
Bad Block 0x3d1 found (address 0x7a20000)
Bad Block 0x3d2 found (address 0x7a40000)
Bad Block 0x3d3 found (address 0x7a60000)
Bad Block 0x3d4 found (address 0x7a80000)
Bad Block 0x3d5 found (address 0x7aa0000)
Bad Block 0x3d6 found (address 0x7ac0000)
Bad Block 0x3d7 found (address 0x7ae0000)
Bad Block 0x3d8 found (address 0x7b00000)
Bad Block 0x3d9 found (address 0x7b20000)
Bad Block 0x3da found (address 0x7b40000)
Bad Block 0x3db found (address 0x7b60000)
Bad Block 0x3de found (address 0x7bc0000)
Bad Block 0x3e0 found (address 0x7c00000)
Bad Block 0x3e1 found (address 0x7c20000)
Bad Block 0x3e3 found (address 0x7c60000)
Bad Block 0x3e5 found (address 0x7ca0000)
Bad Block 0x3e7 found (address 0x7ce0000)
Bad Block 0x3ff found (address 0x7fe0000)
Creating 9 MTD partitions on "GigaDevice GD5F1GQ4UB":
0x000003c00000-0x0000077e0000 : "rootfs"
0x000000020000-0x000003c00000 : "rootfs_update"
0x000007900000-0x000007d00000 : "data"
0x000007800000-0x000007900000 : "romfile"
0x000007d00000-0x000007e00000 : "rom-d"
0x000007e00000-0x000007f00000 : "wwan"
0x000000000000-0x000000020000 : "nvram"
0x000003c00000-0x0000077e0000 : "image"
0x000000020000-0x000003c00000 : "image_update"
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
NET: Registered protocol family 24
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
brcmboard: brcm_board_init entry
SES: Button Interrupt 0x1 is enabled
SES: LED GPIO 0x1 is enabled
DYING GASP IRQ Initialized and Enabled
backup_hardware_led_config:target_board_ledsrc=1824
WIFI: Button Interrupt 0x4 is enabled
RESET: Button Interrupt 0x0 is enabled
map_hw_timer_interrupt,132: interrupt_id 104
map_hw_timer_interrupt,132: interrupt_id 105
map_hw_timer_interrupt,132: interrupt_id 106
map_hw_timer_interrupt,132: interrupt_id 107
Serial: BCM63XX driver $Revision: 3.00 $
Magic SysRq with Auxilliary trigger char enabled (type ^ h for list of supported commands)
ttyS0 at MMIO 0xb0000280 (irq = 8) is a BCM63XX
ttyS1 at MMIO 0xb00002a0 (irq = 9) is a BCM63XX
Total # RxBds=5308
bcmPktDmaBds_init: Broadcom Packet DMA BDs initialized
GACT probability NOT on
Mirror/redirect action on
u32 classifier
input device check on
Actions configured
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Initializing MCPD Module
Ebtables v2.0 registered
ebt_time registered
ebt_ftos registered
ebt_wmm_mark registered
L2TP core: blog_l2tp_rcv_check
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
8021q: 802.1Q VLAN Support v1.8
VFS: Mounted root (jffs2 filesystem) readonly on device 31:0.
Freeing unused kernel memory: 220k freed
init started: BusyBox v1.20.1 (2017-11-27 11:00:17 CST)
jffs2: jffs2_scan_inode_node(): CRC failed on node at 0x003407e0: Read 0xffffffff, calculated 0x86e5d40c
jffs2: Empty flash at 0x003cf330 ends at 0x003cf800
mount: mounting mtd:bootfs on /bootfs failed: No such file or directory
Mounting filesystems...
mount: mounting mtd:bootfs on /bootfs failed: No such file or directory
Configuring system...
wlcsm: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
Initializing WLCSM Module
WLCSM Module loaded successfully
is_nand:1 is_manufacturer:0
restore done!
Loading drivers and kernel modules...
brcmchipinfo: brcm_chipinfo_init entry
bcmxtmrt: Broadcom BCM3381B0 ATM/PTM Network Device v0.9 Nov 27 2017 10:59:11
Broadcom Ingress QoS Module Char Driver v0.1 Nov 27 2017 10:57:31 Registered<243>
Broadcom Ingress QoS ver 0.1 initialized
BPM: tot_mem_size=134217728B (128MB), buf_mem_size <15%> =20132655B (19MB), num of buffers=9986, buf size=2016
Broadcom BPM Module Char Driver v0.1 Nov 27 2017 10:57:16 Registered<244>
NBUFF v1.0 Initialized
Initialized fcache state
Broadcom Packet Flow Cache Char Driver v3.0 Nov 27 2017 10:57:31 Registered<242>
Created Proc FS /procfs/fcache
Broadcom Packet Flow Cache registered with netdev chain
Broadcom Packet Flow Cache learning via BLOG enabled.
flwStatsThread created
Constructed Broadcom Packet Flow Cache v3.0 Nov 27 2017 10:57:31
bcmxtmcfg: bcmxtmcfg_init entry
adsl: adsl_init entry
Broadcom BCM63381B0 Ethernet Network Device v0.1 Nov 27 2017 10:59:05
ETH Init: Ch:0 - 200 tx BDs at 0xa506e000
ETH Init: Ch:0 - 3994 rx BDs at 0xa51a8000
dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
eth3: PHY_ID <0x00000001 : 0x01> MAC : xxx
eth2: PHY_ID <0x00000002 : 0x02> MAC : xxx
eth1: PHY_ID <0x00000003 : 0x03> MAC : xxx
eth0: PHY_ID <0x00000004 : 0x04> MAC : xxx
Ethernet Auto Power Down and Sleep: Enabled
All Port Bit Map: 0x000f: eth3,eth2,eth1,eth0
Chip WAN Only Ports 0000, Defined WAN Only Ports 0000, WAN Only Port Result: 0x0000:
Chip WAN Preffered Ports 0000, Defined WAN Preffered Ports 0000, WAN Preffered Port Result: 0x0000:
Chip LAN Only Ports 0000, Defined LAN Only Ports 0000, LAN Only Port Result: 0x0000:
WAN/LAN Both Capable Ports 0x000f:eth3,eth2,eth1,eth0
NComm TMS V6.80 Kernel Module loaded.
--SMP support
wl: dsl_tx_pkt_flush_len=338
wl: norm_wmark_tot=3040, pktc_wmark_tot=3040
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
wl: passivemode=1
wl0: creating kthread wl0-kthrd
wl: napimode=0
initvars_cis_pci: Not CIS format
Neither SPROM nor OTP has valid image
wl:srom/otp not programmed, using main memory mapped srom info(wombo board)
wl: ID=pci/2/0/
wl: ID=pci/2/0/
wl: loading /etc/wlan/bcm43217_map.bin
srom rev:8
wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=32
wl0: allocskbmode=1 currallocskbsz=1024
wl0: Broadcom BCM43227 802.11 Wireless Controller 7.14.164.303.cpe4.16L05.0-kdb
dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
/etc/rc3.d/S45bcm-base-drivers: line 158: /usr/bin/nvram_product: not found
/etc/rc3.d/S45bcm-base-drivers: line 158: /usr/bin/nvram_product: not found
Loading PCM shim driver
Endpoint: endpoint_init entry
Endpoint: endpoint_init COMPLETED
Broadcom 802.1Q VLAN Interface, v0.1
brcm_otp_init entry
Skip /etc/loadclm.sh: /etc/wlan/clm/router.clm_blob doesn't exist
0
nf_conntrack version 0.5.0 (1922 buckets, 7688 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
Starting SWMDK...
Note: Loading 6300 MDK (default) driver for 63381 chip
Switch MDK: num_switches = 1
Switch MDK: unit = 0; phy_pbmp = 0xf; config_pbmp = 0xf
Switch MDK link poll thread: unit=0; phypbmp=0xf config_pbmp=0xf
Energy Efficient Ethernet: Enabled
Jan 1 00:00:39 crond[645]: crond: crond (busybox 1.20.1) started, log level 8
START disable Lan...
dnsmasq: unknown user or group: supervisor
Set PowerSave to auto by default ......
Host MIPS Clock divider pwrsaving is enabled
ZCMD Start
zcfg_schema.bin
killall: zywifid_run.sh: no process killed
Saving kernel bootup messages for dumpsysinfo...
killall: zywifid: no process killed
Please press Enter to activate this console. zywifid> [ALERT] wifi_module_init:1066: load libzywl_001_brcm.so ..........
Find MTD Device /dev/mtd3 with name romfile
mtd.oobsize 128 mtd.writesize 2048
romfile type ffff
romfile size 4294967295
romfile crc 65535
zcmdRomConvert
zcmdRomConvert() : Load /data/zcfg_config.json failzcmdDataModelInit : Parse json from /data/zcfg_config.json fail
zcmdDataModelInit : config is broken
zcmdDataModelInit :try backup config
mv: can't rename '/data/zcfg_config.json.bak': No space left on device
zywifid> [ALERT] main:1195: Check and fix Wifi MAC address......
rm: can't remove '/tmp/wifiScanTime*': No such file or directory
Find MTD Device /dev/mtd2 with name data
Could not erase MTD device: /dev/mtd2