uspio sam narediti DVD, a jos samo przu, ali kako!
Evo vam da ubuduce znate :
>>Reconnect the jumper line on the rear panel of the Drive to SL(slave) position, and reposition other IDE device to Master.
All the devices shall be connected on the same cable.
If you have a CD-RW drive or a DVD-ROM drive besides Primary IDE HDD at Slave position, please re-connect the above drives to Master and connect the DVD-R/RW Drive on the same cable line.
Some HDD require jumper setting change when a drive is connected to the Slave position.
Please consult with the manual or check the relevant web site for the infomation.<<