Machine:
Abit AN7
AMD Atholon 2500+ Barton
2x256MB Kingmax Super RAM PC3200 400MHz
ATI Radeon 9200SE 64MB
Segate 120GB Serial ATA (two partition 10GB and 110GB)
Modem US Robotics v.90
PSU Logic ATX2 400W
CD-RW
Cooler Spire Whisper Rock III
Windows XP Home Edition
Put together: 21.02.2004.
Temperature:
CPU no more than 50C idle
System no more than 38C
Power no more than 35C
2500+ 166x11
FSB/DRAM ratio: 6/6 333MH
CPU core voltage 1.65V
DDR SDRAM VOltage 2.65V
NB CORE VOltage 1.55V
Voltage monitornig:
NB 1,64
CPU 1,69
DDR 2,69
DDR VTT 1,35
Memory setings: By SPD: 3 5 5 10
DIMM 3-2
Ima par dana da imam problema, sad cu napisati trenutno sto je. Ispod ovog kratkog imate roman od 01.03. Kad ga upalim nece da se boota. Fanovi rade, MB radi samo nista na monitoru, constanti beep iz MB i POST CODE na "C3" - expand compressed bios code to DRAM. Odoh na resert prvi put, drugi put i sve proradi. Windowsi kazu fatal error i PLAVi EKRAN, sa porukom: A problem has been detected and WIndows has been shut down to prevent damage to your computer.
...........
Technical info:
Stop: 0x0000008E(0xC0000005,0x805847F0,0xF7ce33d4,0x00000000)
Begining dump of phisycal memory.
Jos jedan restart i sve je OK. Komp radi, nisam isprobavao granice max 3 sata. Izvadio CD-R i modem ali sve isto. Kad ga ugasim na 5 minuta i ponovno ga upalim nema problema. Ali kad je ugasen vise od pola sata i vise opet imam problem. Beep iZ MB-a, u Windowsima PLAVI Ekran. Restart i OK. Ludim vec 4 dana.....
Od 1.3.
I have big problems with my computer. My AN7 MB doesnt want to boot somethimes:
Machine:
Abit AN7
AMD Atholon 2500+ Barton
2x256MB Kingmax Super RAM 3200
ATI Radeon 9200SE 64MB
Segate 120GB Serial ATA (two partition 10GB and 110GB)
Modem US Robotics v.90
Logic ATX2 400W
CD-RW
Cooler Spire Whisper Rock III
Windows XP Home Edition
Put together: 21.02.2004.
Temperature:
CPU no more than 50C idle
System no more than 38C
Power no more than 35C
In Bios all default CPU and RAM, CPU on 333 and RAM on 400(optimal), RAM DIMM 1-2.
1.) All work fine till two days(1.3.) ago when WIndows reported fatal error just after
complete boot. Something "Windows discovered fatal error with hardware....to send report..see details....." Windows will be shut down to prevent damaging system(something like that). And if I dont tuch anything then comes BLUES SCREEN.......
2.) 02.03. - Same thing like previous problem. I decide to make reinstal WinXP and formatdisc. First time formating goes well and copying too. After first boot begins instalation and just one minute (where i must put language and other) comes BLUE SCREEN with message:
DRIVER_IRQL_NOT_LESS_OR_EQUAL
TECHNICAL INFORMATION
STOP:0X000000D1(0X00000004,0X00000002,0X00000000,0XF8607697)
i8042prt.sys-ADDRESS F8607697 BASE AT F8606000, DATESTAMP 3b7de4b3
BEGINING DUMP OF PHISICAL MEMMORY..........
And I repeat instalation (just resert, no instalation from start no copying files on disc)
and same thing BLUE SCREEN (same time same place in instalation). And I again formated disc copying files on disc and same thing. I was thinking that HDD was bad and I replace it with new one and there is same problem - BLUE SCREEN, same massage same place and time. Next time when I try to boot nothing happend. Nothing on monitor just black screen, procesor working and fans. BUT ON MOTHER BOARD ON POST CODE stand number "C3", c3 means - expand compressed bios code to DRAM. I dont know what that mean but I think it is problem in memory. Then I resert again and same thing. I turn off power complete and I wait 1 minute. Turn on and its OK, system boot. But same thing with instalation - BLUE SCREEN. Go sleep 4am 03.03.
3.) 03.03. Get modem from MB. I was thinking about memory and I change properties for memory. Now, By SPD, frequency 333MH like procesor. Change location of RAM in DIMs. Now DIMM3 and DIMM2. Make again formating and copying files on HDD and instalation goes OK. Thinking THANKS GOD. Everything was nice. Work about 3 hours and turn off. When I come back for about 2 hours and turn on computer I get again "C3" message on POST CODE and constant beep from MB. No boot. Nothing on screen, procesor work, fans too. Resert and system boots up. When Windows boots up I get again message that: A problem has been detected and WIndows has been shut down to prevent damage to your computer.... BLUE SCREEN. And again restart, next time everything is OK. No "C3" and no message from Windows. I have 5 times restarts to see if this thing will be again but everything is ok. Now I work on computer for 3 hours and its OK. Put back modem and everything is OK.
4.) This morning same thing like yesterday. Turn on comp and nithing happens. Fans work, MB works but no boot. Back screen on monitor. I get constantly beep from my MB. On POST CODE I get "90" - Complete iGuru initial process, AWARD BIOS take over booting job". Beep still on. Take resert and again nothing. Nothing on monitor. Then I turn off and on monitor take another resert of comp and everything goes well this time, system boots up. Then in WIndows I get BLUE SCREEN. This is message:
A problem has been detected and WIndows has been shut down to prevent damage to your computer.
...........
Technical info:
Stop: 0x0000008E(0xC0000005,0x805847F0,0xF7ce33d4,0x00000000)
Begining dump of phisycal memory.
And again restart and now this tim works good. Whats is going on with my computer. Is it MB, RAM or power suply? I get same problem with turn on cold computer. No boot. But when I turn off comp and turn on for 5 minutes I get no problem. Please help me........
New info:
2500+ 166x11
FSB/DRAM ratio: 6/6 333MH
CPU core voltage 1.65V
DDR SDRAM VOltage 2.65V
NB CORE VOltage 1.55V
Voltage monitornig:
NB 1,64
CPU 1,69
DDR 2,69
DDR VTT 1,35
:confused: