imam problem pri dizanju novih win
imam eksterni dvd pa radim prema ovome
Installing Windows 2000, XP using the Addonics USB CD-ROM, DVD-ROM, DVD/CDRW or DVD-R/RW drive. (For Windows 98SE or Me, please proceed to the next section)
1. Download USB DOS driver and Save the file to your hard drive.
2. Use Winzip to extract the file, if you do not have the Winzip program you may get a shareware version here
www.winzip.com
3. Once Winzip is installed, use the program to extract the file.
4. Open the folder name USBboot and execute the rawrite2.exe
5. When prompt for the image name, enter dosboot.img
6. Enter the floppy drive as your destination drive, which in general is the A:\
7. Place a disk into the floppy drive and press enter
8. When it is done, reboot with this disk to use the USB devices.
9. CD/ROM drives will be using the Drive R:\
10. Hard Drives will be using the next letter available. Please note there will be no letter for the hard drive if it has not been partitioned and formatted. If you are not familiar with partitioning or formatting a hard drive, please go to the following Microsoft link for the information
http://support.microsoft.com/default...;EN-US;q255867
11. If everything went well, you should have a drive R:\ for the CD/ROM drive. You are now ready to copy the I386 folder from the Windows 2000 or XP installation CD to the hard drive.
12. At the prompt, go to the C:\drive by typing “C:" then "Enter”
13. At the Local Drive C:\drive, create a Folder name. For example at the C:\prompt type “MD 2k”. Doing this will create a folder name “2K” on your local hard drive.
14. Now type “R": then "Enter” to go to the R:\drive
15. At the R:\ prompt type the following “Path=A:" then press "Enter
16. Now type “Xcopy . /s C:\2k" then press "Enter” (There is a space between Xcopy and the dot)
17. Once the copy process is completed, go to the C:\drive.
18. Open the folder you have created, in this case it is the 2k folder. For example: from the C:\ prompt type “CD 2k" then press "Enter”
19. Now go to the I386 folder by typing CD I386 then Enter, from the C:\I386 type Winnt and enter.
20. Installation should now start. Follow instruction from your Operating System manual on how to install the OS. (Installation will take some time, Please be patient)
problem se javlj kada mi pocme presnimavati win ono u instalaciji kada mi je u kompu disketa za eksterni dvd onda mi napise ''setup is out of memory and cannot continue'' a kada je disketa od dosa onda mi na istome djelu izbaci '' cannot find the end user licensing agremment'' neznam vise sto da radim ludim vec dva dana ko majmun bilo kakve pomoc bi mi dobro dosla
