SeaTools Desktop v2.00.09
Copyright (c) 2003 Kroll Ontrack Inc.
12/30/2003 @ 3:26 PM
The following information has been generated by the SeaTools Desktop. Use this information to help you recognize and resolve potential data access problems in a timely manner.
System Information:
BIOS Date 03/26/02
Conventional Memory size 640 K
Extended Memory size 521076 K
IO Channel type PCI
Drive Information:
DRIVE SIZE MODEL
----- --------- ---------------------
1 80.02 GB BIOS Drive (80 hex) 80 GBYTES
Serial Number = N/A
Int13 Num = 80, PHYS CHS = 9729x255x63.
ParmTable CHS, Rsvd = 9729x255x63
PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 1274 10487
EXTENDED
2 NTFS 1275 3824 20974
3 NTFS 3825 9728 48562
Diagnostic Results:
Drive 1 (BIOS Drive (80 hex) 80 GBYTES)
SMART Status Check Result: Unknown
90-Second Test Result: Passed
File Structure Test Result: Unsupported
Partition 1
Not Checked. Unsupported (or Unknown) Partition
Partition 2
Not Checked. Unsupported (or Unknown) Partition
Partition 3
Not Checked. Unsupported (or Unknown) Partition
Complete Surface Scan Result: Failed with Minor Error(s)
Sector 21743398, I/O Error
S.M.A.R.T., (S)elf (M)onitoring (A)nalysis and (R)eporting (T)echnology, a built-in hard disk drive failure prediction method reports an 'Alert' if a problem has occurred. It reports 'Passed' if no problems are found and 'Unsupported' if a hard disk drive does not support S.M.A.R.T.
******************************************
Diagnostic Summary:
System Memory Test Result: Passed
Drive 1 (BIOS Drive (80 hex) 80 GBYTES)
SMART Status Check Result: Unknown
90-Second Test Result: Passed
File Structure Test Result: Unsupported
Complete Surface Scan Result: Failed with Minor Error(s)
Recommendation:
If you are not experiencing data loss and SeaTools reports File System Structure errors, they may be caused by a lock-up or failure to shutdown Windows correctly. Many times, these errors may be repaired through normal system maintenance. If you are experiencing a hardware error, you should isolate the cause and replace the failing component. If you are unsure how to proceed with repairs, contact a computer professional. After completing any maintenance tasks, run SeaTools again to verify that all errors have been repaired. If errors continue to occur, the system may not be stable. Again, contact a computer professional.
SeaTools Desktop v2.00.09
Copyright (c) 2003 Kroll Ontrack Inc.
--------------
ovo sam dobio Seagate Diagnosticom nakon 8 sati skeniranja harda. I ocito da ima neki error:
"Complete Surface Scan Result: Failed with Minor Error(s)
Sector 21743398, I/O Error"
ocito je da je to razlog...
ali opet...komp se nijednom nije restarto tijekom tih 8 sati... i jebiga, ja sam sad opet confused sta je uzrok...ostaje mi samo hard ili maticna kao krivci...