Citiraj:
Autor Sioux69
Ako podizem cpu sinkronizirano mi se podize i agp ali mogu je mjenjati samo cpu posebno.
Ali sad sve to radi,ja promijenim na recimo 220 spremim postavke i izadjem iz biosa, komp se resetira i ja ponovno udjem u bios a postavke se vrate na overclock mode:auto i sve se vrati na default (200,66)?  |
Provjeri dal u BIOS-u imaš opciju Cool 'n Quite i stavi je na disable
Ma ja sam i sa ovim zadovoljan zapravo ... digo sam ga zapravo za 43%
Probao sam dizati FSB ali ne ide očito bez dizanje voltaže, a ako bi mi to
ubijalo matičnu onda rađe ne.
Evo kako kod mene to izgleda :
CPU Properties:
CPU Type AMD Sempron
CPU Alias Palermo (Winchester-256)
CPU Stepping DH-D0
CPUID CPU Name AMD Sempron(tm) Processor 2800+
CPUID Revision 00010FC0h
CPU Speed:
CPU Clock 2282.9 MHz
CPU Multiplier 8.0x
CPU FSB 285.4 MHz (original: 200 MHz, overclock: 43%)
Memory Bus 190.2 MHz
DRAM:FSB Ratio CPU/12
CPU Cache:
L1 Code Cache 64 KB (Parity)
L1 Data Cache 64 KB (ECC)
L2 Cache 256 KB (On-Die, ECC, Full-Speed)
Motherboard Properties:
Motherboard ID 02/23/2005-nForce-250GB-6A61CA1AC-15
Motherboard Name Abit NF8 Series
Chipset Properties:
Motherboard Chipset nVIDIA nForce3 250Gb/Ultra, AMD Hammer
Memory Timings 2.5-3-3-7 (CL-RCD-RP-RAS)
Command Rate (CR) 2T
SPD Memory Modules:
DIMM1: Kingmax MPXC22D-38KT3R-FHA 512 MB PC3200 DDR SDRAM (2.5-4-4-8 @ 200 MHz) (2.0-3-3-6 @ 133 MHz)
DIMM2: Kingmax MPXC22D-38KT3R-FHA 512 MB PC3200 DDR SDRAM (2.5-4-4-8 @ 200 MHz) (2.0-3-3-6 @ 133 MHz)
Graphics Processor Properties:
Video Adapter ATI Radeon X800 Pro (R420)
GPU Code Name R420 (AGP 8x 1002 / 4A49, Rev 00)
GPU Clock 475 MHz (original: 475 MHz)
Memory Clock 531 MHz (original: 450 MHz overclock: 18%)