Citiraj:
Autor Swarm dude
Nice 
I gave it a go, no problems what so ever. And the proc passed stabile 
But this little thing is not related with OCCT but with SpeedFan and other similar programs. They have a problem reading the correct CPU voltage, I guess that is because of the uGuru chip that is integrated on the mobo and does all the measuring & monitoring. Only the Abit EQ program shows correct CPU voltages. SpeedFan reads 1.22V instead of 1.7V
Could you add Abit EQ to the list of supported programs, or calibrate readings for SpeedFan while reading vcores for uGuru?
I could run a couple of tests and see can that be calibrated, for example if the EQ reads 1.5V and SpeedFan reads 1V and the example I already said 1.7V in EQ and 1.22V in SpeedFan. If that is so, you could just add +0.5V to the value that SpeedFan reads and the CPU voltage would be correct.
Or am I bothering too much  |
You're not bothering me at all
Feel free to ask for improvement, i'll always read them, and they might be turned down, but still, some might be very good ideas.
Alot of OCCT comes from user feedback... actually, you would be amazed at how many things come from user feedback
As for the readings adjustment, i don't think i'll ever implement that. in fact, it is a speedfan/everest/etc problem, and it isn't up to OCCT to modify these values... µGuru isn't very well supported, that's true, bt i don't think your 0.5V offset is common to all motherboards
Sometimes it could be... let's say, 0.2V ? That would mean i'll have to add alot of stuff in the options as this can happens everywhere (3.3V, etc).
Moreover, i don't think this would be useful to alot of people. In fact, you are the veru first person i remember with this kind of problems.... for 3 years now
So sorry about that, but i don't think that'll make it live.
Oh, and b13 is out, adding :
- Much, much better Everest support (zip version detection, when everest is started by OCT it willbe minimized to the tray...)
- bugfix : OCCT would report a negative amount of free memory on systems where more than 2GB of free memory was available.
Let me know how things work !
http://www.ocbase.com/OpenBeta/OCCTPT1.1.0.b13.zip